Fix build warning (which is transmogrified into an error) with my compiler due to...
[asterisk/asterisk.git] / Makefile
1 #
2 # Asterisk -- An open source telephony toolkit.
3 #
4 # Top level Makefile
5 #
6 # Copyright (C) 1999-2010, Digium, Inc.
7 #
8 # Mark Spencer <markster@digium.com>
9 #
10 # This program is free software, distributed under the terms of
11 # the GNU General Public License
12 #
13
14 # All Makefiles use the following variables:
15 #
16 # ASTCFLAGS - compiler options provided by the user (if any)
17 # _ASTCFLAGS - compiler options provided by the build system
18 # ASTLDFLAGS - linker flags (not libraries) provided by the user (if any)
19 # _ASTLDFLAGS - linker flags (not libraries) provided by the build system
20 # LIBS - additional libraries, at top-level for all links,
21 #      on a single object just for that object
22 # SOLINK - linker flags used only for creating dynamically loadable modules
23 #          as .so files
24 # DYLINK - linker flags used only for creating shared libaries
25 #          (.so files on Unix-type platforms, .dylib on Darwin)
26 #
27 # Values for ASTCFLAGS and ASTLDFLAGS can be specified in the
28 # environment when running make, as follows:
29 #
30 #       $ ASTCFLAGS="-Werror" make ...
31 #
32 # or as a variable value on the make command line itself:
33 #
34 #       $ make ASTCFLAGS="-Werror" ...
35
36 export ASTTOPDIR                # Top level dir, used in subdirs' Makefiles
37 export ASTERISKVERSION
38 export ASTERISKVERSIONNUM
39
40 #--- values used for default paths
41
42 # DESTDIR is the staging (or final) directory where files are copied
43 # during the install process. Define it before 'export', otherwise
44 # export will set it to the empty string making ?= fail.
45 # Trying to run asterisk from the DESTDIR is completely unsupported
46 # behavior.
47 # WARNING: do not put spaces or comments after the value.
48 DESTDIR?=$(INSTALL_PATH)
49 export DESTDIR
50
51 export INSTALL_PATH       # Additional prefix for the following paths
52 export ASTETCDIR          # Path for config files
53 export ASTVARRUNDIR
54 export ASTSPOOLDIR
55 export ASTVARLIBDIR
56 export ASTDATADIR
57 export ASTDBDIR
58 export ASTLOGDIR
59 export ASTLIBDIR
60 export ASTMODDIR
61 export ASTMANDIR
62 export ASTHEADERDIR
63 export ASTSBINDIR
64 export AGI_DIR
65 export ASTCONFPATH
66 export ASTKEYDIR
67
68 export OSARCH             # Operating system
69
70 export NOISY_BUILD        # Used in Makefile.rules
71 export MENUSELECT_CFLAGS  # Options selected in menuselect.
72 export AST_DEVMODE        # Set to "yes" for additional compiler
73                           # and runtime checks
74 export AST_DEVMODE_STRICT # Enables shadow warnings (-Wshadow)
75
76 export _SOLINK            # linker flags for all shared objects
77 export SOLINK             # linker flags for loadable modules
78 export DYLINK             # linker flags for shared libraries
79 export STATIC_BUILD       # Additional cflags, set to -static
80                           # for static builds. Probably
81                           # should go directly to ASTLDFLAGS
82
83 #--- paths to various commands
84 # The makeopts include below tries to set these if they're found during
85 # configure.
86 export CC
87 export CXX
88 export AR
89 export RANLIB
90 export HOST_CC
91 export BUILD_CC
92 export INSTALL
93 export STRIP
94 export DOWNLOAD
95 export AWK
96 export GREP
97 export MD5
98 export WGET_EXTRA_ARGS
99 export LDCONFIG
100 export LDCONFIG_FLAGS
101 export PYTHON
102
103 -include makeopts
104
105 # start the primary CFLAGS and LDFLAGS with any that were provided
106 # to the configure script
107 _ASTCFLAGS:=$(CONFIG_CFLAGS)
108 _ASTLDFLAGS:=$(CONFIG_LDFLAGS)
109
110 # Some build systems, such as the one in openwrt, like to pass custom target
111 # CFLAGS and LDFLAGS in the COPTS and LDOPTS variables; these should also
112 # go before any build-system computed flags, since they are defaults, not
113 # overrides
114 _ASTCFLAGS+=$(COPTS)
115 _ASTLDFLAGS+=$(LDOPTS)
116
117 # libxml2 cflags
118 _ASTCFLAGS+=$(LIBXML2_INCLUDE)
119
120 #Uncomment this to see all build commands instead of 'quiet' output
121 #NOISY_BUILD=yes
122
123 empty:=
124 space:=$(empty) $(empty)
125 ASTTOPDIR:=$(subst $(space),\$(space),$(CURDIR))
126
127 # Overwite config files on "make samples"
128 OVERWRITE=y
129
130 # Include debug and macro symbols in the executables (-g) and profiling info (-pg)
131 DEBUG=-g3
132
133 # Asterisk.conf is located in ASTETCDIR or by using the -C flag
134 # when starting Asterisk
135 ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
136 AGI_DIR=$(ASTDATADIR)/agi-bin
137
138 # If you use Apache, you may determine by a grep 'DocumentRoot' of your httpd.conf file
139 HTTP_DOCSDIR=/var/www/html
140 # Determine by a grep 'ScriptAlias' of your Apache httpd.conf file
141 HTTP_CGIDIR=/var/www/cgi-bin
142
143 # If your platform's linker expects a prefix on symbols generated from compiling C
144 # source files, set LINKER_SYMBOL_PREFIX to that value. On some systems, exported symbols
145 # from C source files are prefixed with '_', for example. If this value is not set
146 # properly, the linker scripts that live in the '*.exports' files in various places
147 # in this tree will unintentionally suppress symbols that should be visible
148 # in the final binary objects.
149 LINKER_SYMBOL_PREFIX=
150
151 # Uncomment this to use the older DSP routines
152 #_ASTCFLAGS+=-DOLD_DSP_ROUTINES
153
154 # If the file .asterisk.makeopts is present in your home directory, you can
155 # include all of your favorite menuselect options so that every time you download
156 # a new version of Asterisk, you don't have to run menuselect to set them.
157 # The file /etc/asterisk.makeopts will also be included but can be overridden
158 # by the file in your home directory.
159
160 GLOBAL_MAKEOPTS=$(wildcard /etc/asterisk.makeopts)
161 USER_MAKEOPTS=$(wildcard ~/.asterisk.makeopts)
162
163 MOD_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
164 OTHER_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
165
166 # Create OPTIONS variable, but probably we can assign directly to ASTCFLAGS
167 OPTIONS=
168
169 ifeq ($(OSARCH),linux-gnu)
170   # flag to tell 'ldconfig' to only process specified directories
171   LDCONFIG_FLAGS=-n
172 endif
173
174 ifeq ($(findstring -save-temps,$(_ASTCFLAGS) $(ASTCFLAGS)),)
175   ifeq ($(findstring -pipe,$(_ASTCFLAGS) $(ASTCFLAGS)),)
176     _ASTCFLAGS+=-pipe
177   endif
178 endif
179
180 ifeq ($(findstring -Wall,$(_ASTCFLAGS) $(ASTCFLAGS)),)
181   _ASTCFLAGS+=-Wall
182 endif
183
184 _ASTCFLAGS+=-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(AST_NESTED_FUNCTIONS) $(DEBUG)
185 ADDL_TARGETS=
186
187 ifeq ($(AST_DEVMODE),yes)
188   _ASTCFLAGS+=-Werror
189   _ASTCFLAGS+=-Wunused
190   _ASTCFLAGS+=$(AST_DECLARATION_AFTER_STATEMENT)
191   _ASTCFLAGS+=$(AST_FORTIFY_SOURCE)
192   _ASTCFLAGS+=$(AST_TRAMPOLINES)
193   _ASTCFLAGS+=-Wundef
194   _ASTCFLAGS+=-Wmissing-format-attribute
195   _ASTCFLAGS+=-Wformat=2
196   ifeq ($(AST_DEVMODE_STRICT),yes)
197     _ASTCFLAGS+=-Wshadow
198   endif
199   ADDL_TARGETS+=validate-docs
200 endif
201
202 ifneq ($(findstring BSD,$(OSARCH)),)
203   _ASTCFLAGS+=-isystem /usr/local/include
204 endif
205
206 ifeq ($(OSARCH),FreeBSD)
207   # -V is understood by BSD Make, not by GNU make.
208   BSDVERSION=$(shell make -V OSVERSION -f /usr/share/mk/bsd.port.subdir.mk)
209   _ASTCFLAGS+=$(shell if test $(BSDVERSION) -lt 500016 ; then echo "-D_THREAD_SAFE"; fi)
210   # flag to tell 'ldconfig' to only process specified directories
211   LDCONFIG_FLAGS=-m
212 endif
213
214 ifeq ($(OSARCH),NetBSD)
215   _ASTCFLAGS+=-pthread -I/usr/pkg/include
216 endif
217
218 ifeq ($(OSARCH),OpenBSD)
219   _ASTCFLAGS+=-pthread -ftrampolines
220 endif
221
222 ifeq ($(OSARCH),SunOS)
223   _ASTCFLAGS+=-Wcast-align -DSOLARIS -I../include/solaris-compat -I/opt/ssl/include -I/usr/local/ssl/include -D_XPG4_2 -D__EXTENSIONS__
224 endif
225
226 ifneq ($(GREP),)
227   ASTERISKVERSION:=$(shell GREP=$(GREP) AWK=$(AWK) GIT=$(GIT) build_tools/make_version .)
228 endif
229 ifneq ($(AWK),)
230   ifneq ($(wildcard .version),)
231     ASTERISKVERSIONNUM:=$(shell $(AWK) -F. '{printf "%01d%02d%02d", $$1, $$2, $$3}' .version)
232   endif
233 endif
234
235 ifneq ($(wildcard .svn),)
236   ASTERISKVERSIONNUM:=999999
237 endif
238
239 _ASTCFLAGS+=$(OPTIONS)
240
241 MOD_SUBDIRS:=channels pbx apps codecs formats cdr cel bridges funcs tests main res addons $(LOCAL_MOD_SUBDIRS)
242 OTHER_SUBDIRS:=utils agi
243 SUBDIRS:=$(OTHER_SUBDIRS) $(MOD_SUBDIRS)
244 SUBDIRS_INSTALL:=$(SUBDIRS:%=%-install)
245 SUBDIRS_CLEAN:=$(SUBDIRS:%=%-clean)
246 SUBDIRS_DIST_CLEAN:=$(SUBDIRS:%=%-dist-clean)
247 SUBDIRS_UNINSTALL:=$(SUBDIRS:%=%-uninstall)
248 MOD_SUBDIRS_EMBED_LDSCRIPT:=$(MOD_SUBDIRS:%=%-embed-ldscript)
249 MOD_SUBDIRS_EMBED_LDFLAGS:=$(MOD_SUBDIRS:%=%-embed-ldflags)
250 MOD_SUBDIRS_EMBED_LIBS:=$(MOD_SUBDIRS:%=%-embed-libs)
251 MOD_SUBDIRS_MENUSELECT_TREE:=$(MOD_SUBDIRS:%=%-menuselect-tree)
252
253 ifneq ($(findstring darwin,$(OSARCH)),)
254   _ASTCFLAGS+=-D__Darwin__
255   _SOLINK=-Xlinker -macosx_version_min -Xlinker 10.6 -Xlinker -undefined -Xlinker dynamic_lookup
256   _SOLINK+=/usr/lib/bundle1.o
257   SOLINK=-bundle $(_SOLINK)
258   DYLINK=-Xlinker -dylib $(_SOLINK)
259   _ASTLDFLAGS+=-L/usr/local/lib
260 else
261 # These are used for all but Darwin
262   SOLINK=-shared
263   DYLINK=$(SOLINK)
264   ifneq ($(findstring BSD,$(OSARCH)),)
265     _ASTLDFLAGS+=-L/usr/local/lib
266   endif
267 endif
268
269 # Include rpath settings
270 _ASTLDFLAGS+=$(AST_RPATH)
271
272 ifeq ($(OSARCH),SunOS)
273   SOLINK=-shared -fpic -L/usr/local/ssl/lib -lrt
274   DYLINK=$(SOLINK)
275 endif
276
277 ifeq ($(OSARCH),OpenBSD)
278   SOLINK=-shared -fpic
279   DYLINK=$(SOLINK)
280 endif
281
282 # comment to print directories during submakes
283 #PRINT_DIR=yes
284
285 ifneq ($(INSIDE_EMACS),)
286 PRINT_DIR=yes
287 endif
288
289 SILENTMAKE:=$(MAKE) --quiet --no-print-directory
290 ifneq ($(PRINT_DIR)$(NOISY_BUILD),)
291 SUBMAKE:=$(MAKE)
292 else
293 SUBMAKE:=$(MAKE) --quiet --no-print-directory
294 endif
295
296 # $(MAKE) is printed in several places, and we want it to be a
297 # fixed size string. Define a variable whose name has also the
298 # same size, so we can easily align text.
299 ifeq ($(MAKE), gmake)
300         mK="gmake"
301 else
302         mK=" make"
303 endif
304
305 all: _all
306         @echo " +--------- Asterisk Build Complete ---------+"
307         @echo " + Asterisk has successfully been built, and +"
308         @echo " + can be installed by running:              +"
309         @echo " +                                           +"
310         @echo " +               $(mK) install               +"
311         @echo " +-------------------------------------------+"
312
313 full: _full
314         @echo " +--------- Asterisk Build Complete ---------+"
315         @echo " + Asterisk has successfully been built, and +"
316         @echo " + can be installed by running:              +"
317         @echo " +                                           +"
318         @echo " +               $(mK) install               +"
319         @echo " +-------------------------------------------+"
320
321
322 _all: makeopts $(SUBDIRS) doc/core-en_US.xml $(ADDL_TARGETS)
323
324 _full: makeopts $(SUBDIRS) doc/full-en_US.xml $(ADDL_TARGETS)
325
326 makeopts: configure
327         @echo "****"
328         @echo "**** The configure script must be executed before running '$(MAKE)'."
329         @echo "****               Please run \"./configure\"."
330         @echo "****"
331         @exit 1
332
333 menuselect.makeopts: menuselect/menuselect menuselect-tree makeopts build_tools/menuselect-deps $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
334 ifeq ($(filter %menuselect,$(MAKECMDGOALS)),)
335         menuselect/menuselect --check-deps $@
336         menuselect/menuselect --check-deps $@ $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
337 endif
338
339 $(MOD_SUBDIRS_EMBED_LDSCRIPT):
340         +@echo "EMBED_LDSCRIPTS+="`$(SILENTMAKE) -C $(@:-embed-ldscript=) SUBDIR=$(@:-embed-ldscript=) __embed_ldscript` >> makeopts.embed_rules
341
342 $(MOD_SUBDIRS_EMBED_LDFLAGS):
343         +@echo "EMBED_LDFLAGS+="`$(SILENTMAKE) -C $(@:-embed-ldflags=) SUBDIR=$(@:-embed-ldflags=) __embed_ldflags` >> makeopts.embed_rules
344
345 $(MOD_SUBDIRS_EMBED_LIBS):
346         +@echo "EMBED_LIBS+="`$(SILENTMAKE) -C $(@:-embed-libs=) SUBDIR=$(@:-embed-libs=) __embed_libs` >> makeopts.embed_rules
347
348 $(MOD_SUBDIRS_MENUSELECT_TREE):
349         +@$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) moduleinfo
350         +@$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) makeopts
351
352 makeopts.embed_rules: menuselect.makeopts
353         @echo "Generating embedded module rules ..."
354         @rm -f $@
355         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDSCRIPT)
356         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDFLAGS)
357         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LIBS)
358
359 $(SUBDIRS): makeopts .lastclean main/version.c include/asterisk/build.h include/asterisk/buildopts.h defaults.h makeopts.embed_rules
360
361 ifeq ($(findstring $(OSARCH), mingw32 cygwin ),)
362     # Non-windows:
363     # ensure that all module subdirectories are processed before 'main' during
364     # a parallel build, since if there are modules selected to be embedded the
365     # directories containing them must be completed before the main Asterisk
366     # binary can be built
367 main: $(filter-out main,$(MOD_SUBDIRS))
368 else
369     # Windows: we need to build main (i.e. the asterisk dll) first,
370     # followed by res, followed by the other directories, because
371     # dll symbols must be resolved during linking and not at runtime.
372 D1:= $(filter-out main,$(MOD_SUBDIRS))
373 D1:= $(filter-out res,$(D1))
374
375 $(D1): res
376 res:    main
377 endif
378
379 $(MOD_SUBDIRS): makeopts
380         +@_ASTCFLAGS="$(MOD_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
381
382 $(OTHER_SUBDIRS): makeopts
383         +@_ASTCFLAGS="$(OTHER_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
384
385 defaults.h: makeopts .lastclean build_tools/make_defaults_h
386         @build_tools/make_defaults_h > $@.tmp
387         @cmp -s $@.tmp $@ || mv $@.tmp $@
388         @rm -f $@.tmp
389
390 main/version.c: FORCE .lastclean
391         @build_tools/make_version_c > $@.tmp
392         @cmp -s $@.tmp $@ || mv $@.tmp $@
393         @rm -f $@.tmp
394
395 include/asterisk/buildopts.h: menuselect.makeopts .lastclean
396         @build_tools/make_buildopts_h > $@.tmp
397         @cmp -s $@.tmp $@ || mv $@.tmp $@
398         @rm -f $@.tmp
399
400 # build.h must depend on .lastclean, or parallel make may wipe it out after it's
401 # been created.
402 include/asterisk/build.h: .lastclean
403         @build_tools/make_build_h > $@
404
405 $(SUBDIRS_CLEAN):
406         +@$(SUBMAKE) -C $(@:-clean=) clean
407
408 $(SUBDIRS_DIST_CLEAN):
409         +@$(SUBMAKE) -C $(@:-dist-clean=) dist-clean
410
411 clean: $(SUBDIRS_CLEAN) _clean
412
413 _clean:
414         rm -f defaults.h
415         rm -f include/asterisk/build.h
416         rm -f main/version.c
417         rm -f doc/core-en_US.xml
418         rm -f doc/full-en_US.xml
419         @$(MAKE) -C menuselect clean
420         cp -f .cleancount .lastclean
421
422 dist-clean: distclean
423
424 distclean: $(SUBDIRS_DIST_CLEAN) _clean
425         @$(MAKE) -C menuselect dist-clean
426         @$(MAKE) -C sounds dist-clean
427         rm -f menuselect.makeopts makeopts menuselect-tree menuselect.makedeps
428         rm -f makeopts.embed_rules
429         rm -f config.log config.status config.cache
430         rm -rf autom4te.cache
431         rm -f include/asterisk/autoconfig.h
432         rm -f include/asterisk/buildopts.h
433         rm -rf doc/api
434         rm -f build_tools/menuselect-deps
435
436 datafiles: _all doc/core-en_US.xml
437         CFLAGS="$(_ASTCFLAGS) $(ASTCFLAGS)" build_tools/mkpkgconfig "$(DESTDIR)$(libdir)/pkgconfig";
438 # Should static HTTP be installed during make samples or even with its own target ala
439 # webvoicemail?  There are portions here that *could* be customized but might also be
440 # improved a lot.  I'll put it here for now.
441
442         for x in static-http/*; do \
443                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/static-http" ; \
444         done
445         $(INSTALL) -m 644 doc/core-en_US.xml "$(DESTDIR)$(ASTDATADIR)/static-http";
446         if [ -d doc/tex/asterisk ] ; then \
447                 $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/static-http/docs" ; \
448                 for n in doc/tex/asterisk/* ; do \
449                         $(INSTALL) -m 644 $$n "$(DESTDIR)$(ASTDATADIR)/static-http/docs" ; \
450                 done \
451         fi
452         for x in images/*.jpg; do \
453                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/images" ; \
454         done
455         $(MAKE) -C sounds install
456         find rest-api -name "*.json" | while read x; do \
457                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/rest-api" ; \
458         done
459
460 ifneq ($(GREP),)
461   XML_core_en_US = $(foreach dir,$(MOD_SUBDIRS),$(shell $(GREP) -l "language=\"en_US\"" $(dir)/*.c $(dir)/*.cc 2>/dev/null))
462 endif
463
464 doc/core-en_US.xml: makeopts .lastclean $(XML_core_en_US)
465         @printf "Building Documentation For: "
466         @echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $@
467         @echo "<!DOCTYPE docs SYSTEM \"appdocsxml.dtd\">" >> $@
468         @echo "<docs xmlns:xi=\"http://www.w3.org/2001/XInclude\">" >> $@
469         @for x in $(MOD_SUBDIRS); do \
470                 printf "$$x " ; \
471                 for i in `find $$x -name '*.c'`; do \
472                         $(AWK) -f build_tools/get_documentation $$i >> $@ ; \
473                 done ; \
474         done
475         @echo
476         @echo "</docs>" >> $@
477
478 ifneq ($(GREP),)
479   XMX_full_en_US = $(foreach dir,$(MOD_SUBDIRS),$(shell $(GREP) -l "language=\"en_US\"" $(dir)/*.c $(dir)/*.cc 2>/dev/null))
480 endif
481
482 doc/full-en_US.xml: makeopts .lastclean $(XML_full_en_US)
483 ifeq ($(PYTHON),:)
484         @echo "--------------------------------------------------------------------------"
485         @echo "---        Please install python to build full documentation           ---"
486         @echo "--------------------------------------------------------------------------"
487 else
488         @printf "Building Documentation For: "
489         @echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $@
490         @echo "<!DOCTYPE docs SYSTEM \"appdocsxml.dtd\">" >> $@
491         @echo "<docs xmlns:xi=\"http://www.w3.org/2001/XInclude\">" >> $@
492         @for x in $(MOD_SUBDIRS); do \
493                 printf "$$x " ; \
494                 for i in $$x/*.c; do \
495                         $(PYTHON) build_tools/get_documentation.py < $$i >> $@ ; \
496                 done ; \
497         done
498         @echo
499         @echo "</docs>" >> $@
500         @$(PYTHON) build_tools/post_process_documentation.py -i $@ -o "doc/core-en_US.xml"
501 endif
502
503 validate-docs: doc/core-en_US.xml
504 ifeq ($(XMLSTARLET)$(XMLLINT),::)
505         @echo "--------------------------------------------------------------------------"
506         @echo "--- Please install xmllint or xmlstarlet to validate the documentation ---"
507         @echo "--------------------------------------------------------------------------"
508 else
509   ifneq ($(XMLLINT),:)
510         $(XMLLINT) --dtdvalid doc/appdocsxml.dtd --noout $<
511   else
512         $(XMLSTARLET) val -d doc/appdocsxml.dtd $<
513   endif
514 endif
515
516 update:
517         @if [ -d .svn ]; then \
518                 echo "Updating from Subversion..." ; \
519                 fromrev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
520                 svn update | tee update.out; \
521                 torev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
522                 echo "`date`  Updated from revision $${fromrev} to $${torev}." >> update.log; \
523                 rm -f .version; \
524                 if [ `grep -c ^C update.out` -gt 0 ]; then \
525                         echo ; echo "The following files have conflicts:" ; \
526                         grep ^C update.out | cut -b4- ; \
527                 fi ; \
528                 rm -f update.out; \
529         else \
530                 echo "Not under version control";  \
531         fi
532
533 NEWHEADERS=$(notdir $(wildcard include/asterisk/*.h))
534 OLDHEADERS=$(filter-out $(NEWHEADERS) $(notdir $(DESTDIR)$(ASTHEADERDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTHEADERDIR)/*.h)))
535 INSTALLDIRS="$(ASTLIBDIR)" "$(ASTMODDIR)" "$(ASTSBINDIR)" "$(ASTETCDIR)" "$(ASTVARRUNDIR)" \
536         "$(ASTSPOOLDIR)" "$(ASTSPOOLDIR)/dictate" "$(ASTSPOOLDIR)/meetme" \
537         "$(ASTSPOOLDIR)/monitor" "$(ASTSPOOLDIR)/system" "$(ASTSPOOLDIR)/tmp" \
538         "$(ASTSPOOLDIR)/voicemail" "$(ASTHEADERDIR)" "$(ASTHEADERDIR)/doxygen" \
539         "$(ASTLOGDIR)" "$(ASTLOGDIR)/cdr-csv" "$(ASTLOGDIR)/cdr-custom" \
540         "$(ASTLOGDIR)/cel-custom" "$(ASTDATADIR)" "$(ASTDATADIR)/documentation" \
541         "$(ASTDATADIR)/documentation/thirdparty" "$(ASTDATADIR)/firmware" \
542         "$(ASTDATADIR)/firmware/iax" "$(ASTDATADIR)/images" "$(ASTDATADIR)/keys" \
543         "$(ASTDATADIR)/phoneprov" "$(ASTDATADIR)/rest-api" "$(ASTDATADIR)/static-http" \
544         "$(ASTDATADIR)/sounds" "$(ASTDATADIR)/moh" "$(ASTMANDIR)/man8" "$(AGI_DIR)" "$(ASTDBDIR)"
545
546 installdirs:
547         @for i in $(INSTALLDIRS); do \
548                 if [ ! -z "$${i}" -a ! -d "$(DESTDIR)$${i}" ]; then \
549                         $(INSTALL) -d "$(DESTDIR)$${i}"; \
550                 fi; \
551         done
552
553 main-bininstall:
554         +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTLIBDIR="$(ASTLIBDIR)" $(SUBMAKE) -C main bininstall
555
556 bininstall: _all installdirs $(SUBDIRS_INSTALL) main-bininstall
557         $(INSTALL) -m 755 contrib/scripts/astgenkey "$(DESTDIR)$(ASTSBINDIR)/"
558         $(INSTALL) -m 755 contrib/scripts/autosupport "$(DESTDIR)$(ASTSBINDIR)/"
559         if [ ! -f "$(DESTDIR)$(ASTSBINDIR)/safe_asterisk" -a ! -f /sbin/launchd ]; then \
560                 cat contrib/scripts/safe_asterisk | sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;s|__ASTERISK_LOG_DIR__|$(ASTLOGDIR)|;' > contrib/scripts/safe.tmp ; \
561                 $(INSTALL) -m 755 contrib/scripts/safe.tmp "$(DESTDIR)$(ASTSBINDIR)/safe_asterisk" ; \
562                 rm -f contrib/scripts/safe.tmp ; \
563         fi
564         $(INSTALL) -m 644 include/asterisk.h "$(DESTDIR)$(includedir)"
565         $(INSTALL) -m 644 include/asterisk/*.h "$(DESTDIR)$(ASTHEADERDIR)"
566         $(INSTALL) -m 644 include/asterisk/doxygen/*.h "$(DESTDIR)$(ASTHEADERDIR)/doxygen"
567         if [ -n "$(OLDHEADERS)" ]; then \
568                 for h in $(OLDHEADERS); do rm -f "$(DESTDIR)$(ASTHEADERDIR)/$$h"; done \
569         fi
570
571         $(INSTALL) -m 644 doc/core-*.xml "$(DESTDIR)$(ASTDATADIR)/documentation"
572         $(INSTALL) -m 644 doc/appdocsxml.dtd "$(DESTDIR)$(ASTDATADIR)/documentation"
573         $(INSTALL) -m 644 doc/asterisk.8 "$(DESTDIR)$(ASTMANDIR)/man8"
574         $(INSTALL) -m 644 contrib/scripts/astgenkey.8 "$(DESTDIR)$(ASTMANDIR)/man8"
575         $(INSTALL) -m 644 contrib/scripts/autosupport.8 "$(DESTDIR)$(ASTMANDIR)/man8"
576         $(INSTALL) -m 644 contrib/scripts/safe_asterisk.8 "$(DESTDIR)$(ASTMANDIR)/man8"
577         if [ -f contrib/firmware/iax/iaxy.bin ] ; then \
578                 $(INSTALL) -m 644 contrib/firmware/iax/iaxy.bin "$(DESTDIR)$(ASTDATADIR)/firmware/iax/iaxy.bin"; \
579         fi
580
581 $(SUBDIRS_INSTALL):
582         +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" $(SUBMAKE) -C $(@:-install=) install
583
584 NEWMODS:=$(foreach d,$(MOD_SUBDIRS),$(notdir $(wildcard $(d)/*.so)))
585 OLDMODS=$(filter-out $(NEWMODS) $(notdir $(DESTDIR)$(ASTMODDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTMODDIR)/*.so)))
586
587 oldmodcheck:
588         @if [ -n "$(OLDMODS)" ]; then \
589                 echo " WARNING WARNING WARNING" ;\
590                 echo "" ;\
591                 echo " Your Asterisk modules directory, located at" ;\
592                 echo " $(DESTDIR)$(ASTMODDIR)" ;\
593                 echo " contains modules that were not installed by this " ;\
594                 echo " version of Asterisk. Please ensure that these" ;\
595                 echo " modules are compatible with this version before" ;\
596                 echo " attempting to run Asterisk." ;\
597                 echo "" ;\
598                 for f in $(OLDMODS); do \
599                         echo "    $$f" ;\
600                 done ;\
601                 echo "" ;\
602                 echo " WARNING WARNING WARNING" ;\
603         fi
604
605 badshell:
606 ifneq ($(findstring ~,$(DESTDIR)),)
607         @echo "Your shell doesn't do ~ expansion when expected (specifically, when doing \"make install DESTDIR=~/path\")."
608         @echo "Try replacing ~ with \$$HOME, as in \"make install DESTDIR=\$$HOME/path\"."
609         @exit 1
610 endif
611
612 install: badshell bininstall datafiles
613         @if [ -x /usr/sbin/asterisk-post-install ]; then \
614                 /usr/sbin/asterisk-post-install "$(DESTDIR)" . ; \
615         fi
616         @echo " +---- Asterisk Installation Complete -------+"
617         @echo " +                                           +"
618         @echo " +    YOU MUST READ THE SECURITY DOCUMENT    +"
619         @echo " +                                           +"
620         @echo " + Asterisk has successfully been installed. +"
621         @echo " + If you would like to install the sample   +"
622         @echo " + configuration files (overwriting any      +"
623         @echo " + existing config files), run:              +"
624         @echo " +                                           +"
625         @echo " +               $(mK) samples               +"
626         @echo " +                                           +"
627         @echo " +-----------------  or ---------------------+"
628         @echo " +                                           +"
629         @echo " + You can go ahead and install the asterisk +"
630         @echo " + program documentation now or later run:   +"
631         @echo " +                                           +"
632         @echo " +              $(mK) progdocs               +"
633         @echo " +                                           +"
634         @echo " + **Note** This requires that you have      +"
635         @echo " + doxygen installed on your local system    +"
636         @echo " +-------------------------------------------+"
637         @$(MAKE) -s oldmodcheck
638
639 isntall: install
640
641 upgrade: bininstall
642
643 # XXX why *.adsi is installed first ?
644 adsi:
645         @echo Installing adsi config files...
646         $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)"
647         @for x in configs/*.adsi; do \
648                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
649                 if [ -f "$${dst}" ] ; then \
650                         echo "Overwriting $$x" ; \
651                 else \
652                         echo "Installing $$x" ; \
653                 fi ; \
654                 $(INSTALL) -m 644 "$$x" "$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
655         done
656
657 samples: adsi
658         @echo Installing other config files...
659         @for x in configs/*.sample; do \
660                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x .sample`" ;        \
661                 if [ -f "$${dst}" ]; then \
662                         if [ "$(OVERWRITE)" = "y" ]; then \
663                                 if cmp -s "$${dst}" "$$x" ; then \
664                                         echo "Config file $$x is unchanged"; \
665                                         continue; \
666                                 fi ; \
667                                 mv -f "$${dst}" "$${dst}.old" ; \
668                         else \
669                                 echo "Skipping config file $$x"; \
670                                 continue; \
671                         fi ;\
672                 fi ; \
673                 echo "Installing file $$x"; \
674                 $(INSTALL) -m 644 "$$x" "$${dst}" ;\
675         done
676         if [ "$(OVERWRITE)" = "y" ]; then \
677                 echo "Updating asterisk.conf" ; \
678                 sed -e 's|^astetcdir.*$$|astetcdir => $(ASTETCDIR)|' \
679                         -e 's|^astmoddir.*$$|astmoddir => $(ASTMODDIR)|' \
680                         -e 's|^astvarlibdir.*$$|astvarlibdir => $(ASTVARLIBDIR)|' \
681                         -e 's|^astdbdir.*$$|astdbdir => $(ASTDBDIR)|' \
682                         -e 's|^astkeydir.*$$|astkeydir => $(ASTKEYDIR)|' \
683                         -e 's|^astdatadir.*$$|astdatadir => $(ASTDATADIR)|' \
684                         -e 's|^astagidir.*$$|astagidir => $(AGI_DIR)|' \
685                         -e 's|^astspooldir.*$$|astspooldir => $(ASTSPOOLDIR)|' \
686                         -e 's|^astrundir.*$$|astrundir => $(ASTVARRUNDIR)|' \
687                         -e 's|^astlogdir.*$$|astlogdir => $(ASTLOGDIR)|' \
688                         -e 's|^astsbindir.*$$|astsbindir => $(ASTSBINDIR)|' \
689                         "$(DESTDIR)$(ASTCONFPATH)" > "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
690                 $(INSTALL) -m 644 "$(DESTDIR)$(ASTCONFPATH).tmp" "$(DESTDIR)$(ASTCONFPATH)" ; \
691                 rm -f "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
692         fi ; \
693         $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX"
694         build_tools/make_sample_voicemail "$(DESTDIR)/$(ASTDATADIR)" "$(DESTDIR)/$(ASTSPOOLDIR)"
695
696         @for x in phoneprov/*; do \
697                 dst="$(DESTDIR)$(ASTDATADIR)/$$x" ;     \
698                 if [ -f "$${dst}" ]; then \
699                         if [ "$(OVERWRITE)" = "y" ]; then \
700                                 if cmp -s "$${dst}" "$$x" ; then \
701                                         echo "Config file $$x is unchanged"; \
702                                         continue; \
703                                 fi ; \
704                                 mv -f "$${dst}" "$${dst}.old" ; \
705                         else \
706                                 echo "Skipping config file $$x"; \
707                                 continue; \
708                         fi ;\
709                 fi ; \
710                 echo "Installing file $$x"; \
711                 $(INSTALL) -m 644 "$$x" "$${dst}" ;\
712         done
713
714 webvmail:
715         @[ -d "$(DESTDIR)$(HTTP_DOCSDIR)/" ] || ( printf "http docs directory not found.\nUpdate assignment of variable HTTP_DOCSDIR in Makefile!\n" && exit 1 )
716         @[ -d "$(DESTDIR)$(HTTP_CGIDIR)" ] || ( printf "cgi-bin directory not found.\nUpdate assignment of variable HTTP_CGIDIR in Makefile!\n" && exit 1 )
717         $(INSTALL) -m 4755 contrib/scripts/vmail.cgi "$(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi"
718         $(INSTALL) -d "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk"
719         for x in images/*.gif; do \
720                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/"; \
721         done
722         @echo " +--------- Asterisk Web Voicemail ----------+"
723         @echo " +                                           +"
724         @echo " + Asterisk Web Voicemail is installed in    +"
725         @echo " + your cgi-bin directory:                   +"
726         @echo " + $(DESTDIR)$(HTTP_CGIDIR)"
727         @echo " + IT USES A SETUID ROOT PERL SCRIPT, SO     +"
728         @echo " + IF YOU DON'T LIKE THAT, UNINSTALL IT!     +"
729         @echo " +                                           +"
730         @echo " + Other static items have been stored in:   +"
731         @echo " + $(DESTDIR)$(HTTP_DOCSDIR)"
732         @echo " +                                           +"
733         @echo " + If these paths do not match your httpd    +"
734         @echo " + installation, correct the definitions     +"
735         @echo " + in your Makefile of HTTP_CGIDIR and       +"
736         @echo " + HTTP_DOCSDIR                              +"
737         @echo " +                                           +"
738         @echo " +-------------------------------------------+"
739
740 progdocs:
741         # Note, Makefile conditionals must not be tabbed out. Wasted hours with that.
742 ifeq ($(DOXYGEN),:)
743         @echo "Doxygen is not installed.  Please install and re-run the configuration script."
744 else
745 ifeq ($(DOT),:)
746         @echo "DOT is not installed. Doxygen will not produce any diagrams. Please install and re-run the configuration script."
747 else
748         # Enable DOT
749         @echo "HAVE_DOT = YES" >> contrib/asterisk-ng-doxygen
750 endif
751         # Set Doxygen PROJECT_NUMBER variable
752 ifneq ($(ASTERISKVERSION),UNKNOWN__and_probably_unsupported)
753         @echo "PROJECT_NUMBER = $(ASTERISKVERSION)" >> contrib/asterisk-ng-doxygen
754 else
755         echo "Asterisk Version is unknown, not configuring Doxygen PROJECT_NUMBER."
756 endif
757         # Validate Doxygen Configuration
758         @doxygen -u contrib/asterisk-ng-doxygen
759         # Run Doxygen
760         @doxygen contrib/asterisk-ng-doxygen
761         # Remove configuration backup file
762         @rm -f contrib/asterisk-ng-doxygen.bak
763 endif
764
765 install-logrotate:
766         if [ ! -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ]; then \
767                 $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ; \
768         fi
769         sed 's#__LOGDIR__#$(ASTLOGDIR)#g' < contrib/scripts/asterisk.logrotate | sed 's#__SBINDIR__#$(ASTSBINDIR)#g' > contrib/scripts/asterisk.logrotate.tmp
770         $(INSTALL) -m 0644 contrib/scripts/asterisk.logrotate.tmp "$(DESTDIR)$(ASTETCDIR)/../logrotate.d/asterisk"
771         rm -f contrib/scripts/asterisk.logrotate.tmp
772
773 config:
774         @if [ "${OSARCH}" = "linux-gnu" ]; then \
775                 if [ -f /etc/redhat-release -o -f /etc/fedora-release ]; then \
776                         cat contrib/init.d/rc.redhat.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
777                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/init.d/asterisk" ; \
778                         rm -f contrib/init.d/rc.asterisk.tmp ; \
779                         if [ ! -f "$(DESTDIR)/etc/sysconfig/asterisk" ] ; then \
780                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
781                         fi ; \
782                         if [ -z "$(DESTDIR)" ] ; then \
783                                 /sbin/chkconfig --add asterisk ; \
784                         fi ; \
785                 elif [ -f /etc/debian_version ] ; then \
786                         cat contrib/init.d/rc.debian.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
787                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ; \
788                         rm -f contrib/init.d/rc.asterisk.tmp ; \
789                         if [ ! -f "$(DESTDIR)/etc/default/asterisk" ] ; then \
790                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/default/asterisk" ; \
791                         fi ; \
792                         if [ -z "$(DESTDIR)" ] ; then \
793                                 /usr/sbin/update-rc.d asterisk defaults 50 91 ; \
794                         fi ; \
795                 elif [ -f /etc/gentoo-release ] ; then \
796                         cat contrib/init.d/rc.gentoo.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
797                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ; \
798                         rm -f contrib/init.d/rc.asterisk.tmp ; \
799                         if [ -z "$(DESTDIR)" ] ; then \
800                                 /sbin/rc-update add asterisk default ; \
801                         fi ; \
802                 elif [ -f /etc/mandrake-release -o -f /etc/mandriva-release ] ; then \
803                         cat contrib/init.d/rc.mandriva.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
804                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/init.d/asterisk" ; \
805                         rm -f contrib/init.d/rc.asterisk.tmp ; \
806                         if [ ! -f /etc/sysconfig/asterisk ] ; then \
807                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
808                         fi ; \
809                         if [ -z "$(DESTDIR)" ] ; then \
810                                 /sbin/chkconfig --add asterisk ; \
811                         fi ; \
812                 elif [ -f /etc/SuSE-release -o -f /etc/novell-release ] ; then \
813                         cat contrib/init.d/rc.suse.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
814                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ;\
815                         rm -f contrib/init.d/rc.asterisk.tmp ; \
816                         if [ ! -f /etc/sysconfig/asterisk ] ; then \
817                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
818                         fi ; \
819                         if [ -z "$(DESTDIR)" ] ; then \
820                                 /sbin/chkconfig --add asterisk ; \
821                         fi ; \
822                 elif [ -f /etc/arch-release -o -f /etc/arch-release ] ; then \
823                         cat contrib/init.d/rc.archlinux.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
824                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/asterisk" ; \
825                         rm -f contrib/init.d/rc.asterisk.tmp ; \
826                 elif [ -d "$(DESTDIR)/Library/LaunchDaemons" ]; then \
827                         if [ ! -f "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist" ]; then \
828                                 sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;' < contrib/init.d/org.asterisk.asterisk.plist > asterisk.plist ; \
829                                 $(INSTALL) -m 644 asterisk.plist "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist"; \
830                                 rm -f asterisk.plist; \
831                         fi; \
832                         if [ ! -f "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.muted.plist" ]; then \
833                                 sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;' < contrib/init.d/org.asterisk.muted.plist > muted.plist ; \
834                                 $(INSTALL) -m 644 muted.plist "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.muted.plist"; \
835                                 rm -f muted.plist; \
836                         fi; \
837                 elif [ -f /etc/slackware-version ]; then \
838                         echo "Slackware is not currently supported, although an init script does exist for it."; \
839                 else \
840                         echo "We could not install init scripts for your distribution." ; \
841                 fi \
842         else \
843                 echo "We could not install init scripts for your operating system." ; \
844         fi
845
846 sounds:
847         $(MAKE) -C sounds all
848
849 # If the cleancount has been changed, force a make clean.
850 # .cleancount is the global clean count, and .lastclean is the
851 # last clean count we had
852
853 .lastclean: .cleancount
854         @$(MAKE) clean
855         @[ -f "$(DESTDIR)$(ASTDBDIR)/astdb.sqlite3" ] || [ ! -f "$(DESTDIR)$(ASTDBDIR)/astdb" ] || [ ! -f menuselect.makeopts ] || grep -q MENUSELECT_UTILS=.*astdb2sqlite3 menuselect.makeopts || (sed -i.orig -e's/MENUSELECT_UTILS=\(.*\)/MENUSELECT_UTILS=\1 astdb2sqlite3/' menuselect.makeopts && echo "Updating menuselect.makeopts to include astdb2sqlite3" && echo "Original version backed up to menuselect.makeopts.orig")
856
857 $(SUBDIRS_UNINSTALL):
858         +@$(SUBMAKE) -C $(@:-uninstall=) uninstall
859
860 main-binuninstall:
861         +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTLIBDIR="$(ASTLIBDIR)" $(SUBMAKE) -C main binuninstall
862
863 _uninstall: $(SUBDIRS_UNINSTALL) main-binuninstall
864         rm -f "$(DESTDIR)$(ASTMODDIR)/"*
865         rm -f "$(DESTDIR)$(ASTSBINDIR)/astgenkey"
866         rm -f "$(DESTDIR)$(ASTSBINDIR)/autosupport"
867         rm -rf "$(DESTDIR)$(ASTHEADERDIR)"
868         rm -rf "$(DESTDIR)$(ASTDATADIR)/firmware"
869         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/asterisk.8"
870         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/astgenkey.8"
871         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/autosupport.8"
872         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/safe_asterisk.8"
873         $(MAKE) -C sounds uninstall
874
875 uninstall: _uninstall
876         @echo " +--------- Asterisk Uninstall Complete -----+"
877         @echo " + Asterisk binaries, sounds, man pages,     +"
878         @echo " + headers, modules, and firmware builds,    +"
879         @echo " + have all been uninstalled.                +"
880         @echo " +                                           +"
881         @echo " + To remove ALL traces of Asterisk,         +"
882         @echo " + including configuration, spool            +"
883         @echo " + directories, and logs, run the following  +"
884         @echo " + command:                                  +"
885         @echo " +                                           +"
886         @echo " +            $(mK) uninstall-all            +"
887         @echo " +-------------------------------------------+"
888
889 uninstall-all: _uninstall
890         rm -rf "$(DESTDIR)$(ASTMODDIR)"
891         rm -rf "$(DESTDIR)$(ASTVARLIBDIR)"
892         rm -rf "$(DESTDIR)$(ASTDATADIR)"
893         rm -rf "$(DESTDIR)$(ASTSPOOLDIR)"
894         rm -rf "$(DESTDIR)$(ASTETCDIR)"
895         rm -rf "$(DESTDIR)$(ASTLOGDIR)"
896
897 menuconfig: menuselect
898
899 cmenuconfig: cmenuselect
900
901 gmenuconfig: gmenuselect
902
903 nmenuconfig: nmenuselect
904
905 menuselect: menuselect/cmenuselect menuselect/nmenuselect menuselect/gmenuselect
906         @if [ -x menuselect/nmenuselect ]; then \
907                 $(MAKE) nmenuselect; \
908         elif [ -x menuselect/cmenuselect ]; then \
909                 $(MAKE) cmenuselect; \
910         elif [ -x menuselect/gmenuselect ]; then \
911                 $(MAKE) gmenuselect; \
912         else \
913                 echo "No menuselect user interface found. Install ncurses,"; \
914                 echo "newt or GTK libraries to build one and re-rerun"; \
915                 echo "'./configure' and 'make menuselect'."; \
916         fi
917
918 cmenuselect: menuselect/cmenuselect menuselect-tree menuselect.makeopts
919         -@menuselect/cmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
920
921 gmenuselect: menuselect/gmenuselect menuselect-tree menuselect.makeopts
922         -@menuselect/gmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
923
924 nmenuselect: menuselect/nmenuselect menuselect-tree menuselect.makeopts
925         -@menuselect/nmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
926
927 # options for make in menuselect/
928 MAKE_MENUSELECT=CC="$(BUILD_CC)" CXX="" LD="" AR="" RANLIB="" \
929                 CFLAGS="$(BUILD_CFLAGS)" LDFLAGS="$(BUILD_LDFLAGS)" \
930                 $(MAKE) -C menuselect CONFIGURE_SILENT="--silent"
931
932 menuselect/menuselect: menuselect/makeopts .lastclean
933         +$(MAKE_MENUSELECT) menuselect
934
935 menuselect/cmenuselect: menuselect/makeopts .lastclean
936         +$(MAKE_MENUSELECT) cmenuselect
937
938 menuselect/gmenuselect: menuselect/makeopts .lastclean
939         +$(MAKE_MENUSELECT) gmenuselect
940
941 menuselect/nmenuselect: menuselect/makeopts .lastclean
942         +$(MAKE_MENUSELECT) nmenuselect
943
944 menuselect/makeopts: makeopts .lastclean
945         +$(MAKE_MENUSELECT) makeopts
946
947 menuselect-tree: $(foreach dir,$(filter-out main,$(MOD_SUBDIRS)),$(wildcard $(dir)/*.c) $(wildcard $(dir)/*.cc)) build_tools/cflags.xml build_tools/cflags-devmode.xml sounds/sounds.xml build_tools/embed_modules.xml utils/utils.xml agi/agi.xml configure makeopts
948         @echo "Generating input for menuselect ..."
949         @echo "<?xml version=\"1.0\"?>" > $@
950         @echo >> $@
951         @echo "<menu name=\"Asterisk Module and Build Option Selection\">" >> $@
952         +@for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SILENTMAKE) -C $${dir} SUBDIR=$${dir} moduleinfo >> $@; done
953         @cat build_tools/cflags.xml >> $@
954         +@for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SILENTMAKE) -C $${dir} SUBDIR=$${dir} makeopts >> $@; done
955         @if [ "${AST_DEVMODE}" = "yes" ]; then \
956                 cat build_tools/cflags-devmode.xml >> $@; \
957         fi
958         @cat utils/utils.xml >> $@
959         @cat agi/agi.xml >> $@
960         @cat build_tools/embed_modules.xml >> $@
961         @cat sounds/sounds.xml >> $@
962         @echo "</menu>" >> $@
963
964 # We don't want to require Python or Pystache for every build, so this is its
965 # own target.
966 stasis-stubs:
967 ifeq ($(PYTHON),:)
968         @echo "--------------------------------------------------------------------------"
969         @echo "---        Please install python to build Stasis HTTP stubs            ---"
970         @echo "--------------------------------------------------------------------------"
971         @false
972 else
973         $(PYTHON) rest-api-templates/make_stasis_http_stubs.py \
974                 rest-api/resources.json res/
975 endif
976
977 .PHONY: menuselect
978 .PHONY: main
979 .PHONY: sounds
980 .PHONY: clean
981 .PHONY: dist-clean
982 .PHONY: distclean
983 .PHONY: all
984 .PHONY: _all
985 .PHONY: full
986 .PHONY: _full
987 .PHONY: prereqs
988 .PHONY: uninstall
989 .PHONY: _uninstall
990 .PHONY: uninstall-all
991 .PHONY: dont-optimize
992 .PHONY: badshell
993 .PHONY: installdirs
994 .PHONY: validate-docs
995 .PHONY: _clean
996 .PHONY: stasis-stubs
997 .PHONY: $(SUBDIRS_INSTALL)
998 .PHONY: $(SUBDIRS_DIST_CLEAN)
999 .PHONY: $(SUBDIRS_CLEAN)
1000 .PHONY: $(SUBDIRS_UNINSTALL)
1001 .PHONY: $(SUBDIRS)
1002 .PHONY: $(MOD_SUBDIRS_EMBED_LDSCRIPT)
1003 .PHONY: $(MOD_SUBDIRS_EMBED_LDFLAGS)
1004 .PHONY: $(MOD_SUBDIRS_EMBED_LIBS)
1005
1006 FORCE:
1007