Remove parsing of constantssrc from reload_config.
[asterisk/asterisk.git] / Makefile
1 #
2 # Asterisk -- A telephony toolkit for Linux.
3
4 # Top level Makefile
5 #
6 # Copyright (C) 1999-2006, Digium, Inc.
7 #
8 # Mark Spencer <markster@digium.com>
9 #
10 # This program is free software, distributed under the terms of
11 # the GNU General Public License
12 #
13
14 # All Makefiles use the following variables:
15 #
16 # ASTCFLAGS - compiler options provided by the user (if any)
17 # _ASTCFLAGS - compiler options provided by the build system
18 # ASTLDFLAGS - linker flags (not libraries) provided by the user (if any)
19 # _ASTLDFLAGS - linker flags (not libraries) provided by the build system
20 # LIBS - additional libraries, at top-level for all links,
21 #      on a single object just for that object
22 # SOLINK - linker flags used only for creating shared objects (.so files),
23 #      used for all .so links
24 #
25 # Values for ASTCFLAGS and ASTLDFLAGS can be specified in the
26 # environment when running make, as follows:
27 #
28 #       $ ASTCFLAGS="-Werror" make ...
29 #
30 # or as a variable value on the make command line itself:
31 #
32 #       $ make ASTCFLAGS="-Werror" ...
33
34 export ASTTOPDIR                # Top level dir, used in subdirs' Makefiles
35 export ASTERISKVERSION
36 export ASTERISKVERSIONNUM
37
38 #--- values used for default paths
39
40 # DESTDIR is the staging (or final) directory where files are copied
41 # during the install process. Define it before 'export', otherwise
42 # export will set it to the empty string making ?= fail.
43 # WARNING: do not put spaces or comments after the value.
44 DESTDIR?=$(INSTALL_PATH)
45 export DESTDIR
46
47 export INSTALL_PATH     # Additional prefix for the following paths
48 export ASTETCDIR                # Path for config files
49 export ASTVARRUNDIR
50 export MODULES_DIR
51 export ASTSPOOLDIR
52 export ASTVARLIBDIR
53 export ASTDATADIR
54 export ASTDBDIR
55 export ASTLOGDIR
56 export ASTLIBDIR
57 export ASTMANDIR
58 export ASTHEADERDIR
59 export ASTBINDIR
60 export ASTSBINDIR
61 export AGI_DIR
62 export ASTCONFPATH
63
64 export OSARCH                   # Operating system
65 export PROC                     # Processor type
66
67 export NOISY_BUILD              # Used in Makefile.rules
68 export MENUSELECT_CFLAGS        # Options selected in menuselect.
69 export AST_DEVMODE              # Set to "yes" for additional compiler
70                                 # and runtime checks
71
72 export SOLINK                   # linker flags for shared objects
73 export STATIC_BUILD             # Additional cflags, set to -static
74                                 # for static builds. Probably
75                                 # should go directly to ASTLDFLAGS
76
77 #--- paths to various commands
78 export CC
79 export CXX
80 export AR
81 export RANLIB
82 export HOST_CC
83 export INSTALL
84 export STRIP
85 export DOWNLOAD
86 export AWK
87 export GREP
88 export ID
89 export MD5
90
91 # even though we could use '-include makeopts' here, use a wildcard
92 # lookup anyway, so that make won't try to build makeopts if it doesn't
93 # exist (other rules will force it to be built if needed)
94 ifneq ($(wildcard makeopts),)
95   include makeopts
96 endif
97
98 # start the primary CFLAGS and LDFLAGS with any that were provided
99 # to the configure script
100 _ASTCFLAGS:=$(CONFIG_CFLAGS)
101 _ASTLDFLAGS:=$(CONFIG_LDFLAGS)
102
103 # Some build systems, such as the one in openwrt, like to pass custom target
104 # CFLAGS and LDFLAGS in the COPTS and LDOPTS variables; these should also
105 # go before any build-system computed flags, since they are defaults, not
106 # overrides
107 _ASTCFLAGS+=$(COPTS)
108 _ASTLDFLAGS+=$(LDOPTS)
109
110 # libxml2 cflags
111 _ASTCFLAGS+=$(LIBXML2_INCLUDE)
112
113 #Uncomment this to see all build commands instead of 'quiet' output
114 #NOISY_BUILD=yes
115
116 empty:=
117 space:=$(empty) $(empty)
118 ASTTOPDIR:=$(subst $(space),\$(space),$(CURDIR))
119
120 # Overwite config files on "make samples"
121 OVERWRITE=y
122
123 # Include debug and macro symbols in the executables (-g) and profiling info (-pg)
124 DEBUG=-g3
125
126
127 # Define standard directories for various platforms
128 # These apply if they are not redefined in asterisk.conf 
129 ifeq ($(OSARCH),SunOS)
130   ASTETCDIR=/var/etc/asterisk
131   ASTLIBDIR=/opt/asterisk/lib
132   ASTVARLIBDIR=/var/opt/asterisk
133   ASTDBDIR=$(ASTVARLIBDIR)
134   ASTKEYDIR=$(ASTVARLIBDIR)
135   ASTSPOOLDIR=/var/spool/asterisk
136   ASTLOGDIR=/var/log/asterisk
137   ASTHEADERDIR=/opt/asterisk/include
138   ASTBINDIR=/opt/asterisk/bin
139   ASTSBINDIR=/opt/asterisk/sbin
140   ASTVARRUNDIR=/var/run/asterisk
141   ASTMANDIR=/opt/asterisk/man
142 else
143   ASTETCDIR=$(sysconfdir)/asterisk
144   ASTLIBDIR=$(libdir)/asterisk
145   ASTHEADERDIR=$(includedir)/asterisk
146   ASTBINDIR=$(bindir)
147   ASTSBINDIR=$(sbindir)
148   ASTSPOOLDIR=$(localstatedir)/spool/asterisk
149   ASTLOGDIR=$(localstatedir)/log/asterisk
150   ASTVARRUNDIR=$(localstatedir)/run/asterisk
151   ASTMANDIR=$(mandir)
152 ifneq ($(findstring BSD,$(OSARCH)),)
153   ASTVARLIBDIR=$(prefix)/share/asterisk
154   ASTVARRUNDIR=$(localstatedir)/run/asterisk
155   ASTDBDIR=$(localstatedir)/db/asterisk
156 else
157   ASTVARLIBDIR=$(localstatedir)/lib/asterisk
158   ASTDBDIR=$(ASTVARLIBDIR)
159 endif
160   ASTKEYDIR=$(ASTVARLIBDIR)
161 endif
162 ifeq ($(ASTDATADIR),)
163   ASTDATADIR:=$(ASTVARLIBDIR)
164 endif
165
166 # Asterisk.conf is located in ASTETCDIR or by using the -C flag
167 # when starting Asterisk
168 ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
169 MODULES_DIR=$(ASTLIBDIR)/modules
170 AGI_DIR=$(ASTDATADIR)/agi-bin
171
172 # If you use Apache, you may determine by a grep 'DocumentRoot' of your httpd.conf file
173 HTTP_DOCSDIR=/var/www/html
174 # Determine by a grep 'ScriptAlias' of your Apache httpd.conf file
175 HTTP_CGIDIR=/var/www/cgi-bin
176
177 # Uncomment this to use the older DSP routines
178 #_ASTCFLAGS+=-DOLD_DSP_ROUTINES
179
180 # If the file .asterisk.makeopts is present in your home directory, you can
181 # include all of your favorite menuselect options so that every time you download
182 # a new version of Asterisk, you don't have to run menuselect to set them. 
183 # The file /etc/asterisk.makeopts will also be included but can be overridden
184 # by the file in your home directory.
185
186 GLOBAL_MAKEOPTS=$(wildcard /etc/asterisk.makeopts)
187 USER_MAKEOPTS=$(wildcard ~/.asterisk.makeopts)
188
189 MOD_SUBDIR_CFLAGS=-I$(ASTTOPDIR)/include
190 OTHER_SUBDIR_CFLAGS=-I$(ASTTOPDIR)/include
191
192 # Create OPTIONS variable, but probably we can assign directly to ASTCFLAGS
193 OPTIONS=
194
195 ifeq ($(OSARCH),linux-gnu)
196   ifeq ($(PROC),x86_64)
197     # You must have GCC 3.4 to use k8, otherwise use athlon
198     PROC=k8
199     #PROC=athlon
200   endif
201
202   ifeq ($(PROC),sparc64)
203     #The problem with sparc is the best stuff is in newer versions of gcc (post 3.0) only.
204     #This works for even old (2.96) versions of gcc and provides a small boost either way.
205     #A ultrasparc cpu is really v9 but the stock debian stable 3.0 gcc doesn't support it.
206     #So we go lowest common available by gcc and go a step down, still a step up from
207     #the default as we now have a better instruction set to work with. - Belgarath
208     PROC=ultrasparc
209     OPTIONS+=$(shell if $(CC) -mtune=$(PROC) -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-mtune=$(PROC)"; fi)
210     OPTIONS+=$(shell if $(CC) -mcpu=v8 -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-mcpu=v8"; fi)
211     OPTIONS+=-fomit-frame-pointer
212   endif
213
214   ifeq ($(PROC),arm)
215     # The Cirrus logic is the only heavily shipping arm processor with a real floating point unit
216     ifeq ($(SUB_PROC),maverick)
217       OPTIONS+=-fsigned-char -mcpu=ep9312
218     else
219       ifeq ($(SUB_PROC),xscale)
220         OPTIONS+=-fsigned-char -mcpu=xscale
221       else
222         OPTIONS+=-fsigned-char 
223       endif
224     endif
225   endif
226 endif
227
228 ifeq ($(findstring -save-temps,$(_ASTCFLAGS) $(ASTCFLAGS)),)
229   ifeq ($(findstring -pipe,$(_ASTCFLAGS) $(ASTCFLAGS)),)
230     _ASTCFLAGS+=-pipe
231   endif
232 endif
233
234 ifeq ($(findstring -Wall,$(_ASTCFLAGS) $(ASTCFLAGS)),)
235   _ASTCFLAGS+=-Wall
236 endif
237
238 _ASTCFLAGS+=-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(DEBUG)
239
240 ifeq ($(AST_DEVMODE),yes)
241   _ASTCFLAGS+=-Werror
242   _ASTCFLAGS+=-Wunused
243   _ASTCFLAGS+=$(AST_DECLARATION_AFTER_STATEMENT)
244   _ASTCFLAGS+=$(AST_FORTIFY_SOURCE)
245   _ASTCFLAGS+=-Wundef 
246   _ASTCFLAGS+=-Wmissing-format-attribute
247   _ASTCFLAGS+=-Wformat=2
248 endif
249
250 ifneq ($(findstring BSD,$(OSARCH)),)
251   _ASTCFLAGS+=-isystem /usr/local/include
252 endif
253
254 ifeq ($(findstring -march,$(_ASTCFLAGS) $(ASTCFLAGS)),)
255   ifneq ($(PROC),ultrasparc)
256     _ASTCFLAGS+=$(shell if $(CC) -march=$(PROC) -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-march=$(PROC)"; fi)
257   endif
258 endif
259
260 ifeq ($(PROC),ppc)
261   _ASTCFLAGS+=-fsigned-char
262 endif
263
264 ifeq ($(OSARCH),FreeBSD)
265   # -V is understood by BSD Make, not by GNU make.
266   BSDVERSION=$(shell make -V OSVERSION -f /usr/share/mk/bsd.port.subdir.mk)
267   _ASTCFLAGS+=$(shell if test $(BSDVERSION) -lt 500016 ; then echo "-D_THREAD_SAFE"; fi)
268 endif
269
270 ifeq ($(OSARCH),NetBSD)
271   _ASTCFLAGS+=-pthread -I/usr/pkg/include
272 endif
273
274 ifeq ($(OSARCH),OpenBSD)
275   _ASTCFLAGS+=-pthread -ftrampolines
276 endif
277
278 ifeq ($(OSARCH),SunOS)
279   _ASTCFLAGS+=-Wcast-align -DSOLARIS -I../include/solaris-compat -I/opt/ssl/include -I/usr/local/ssl/include -D_XPG4_2 -D__EXTENSIONS__
280 endif
281
282 ASTERISKVERSION:=$(shell GREP=$(GREP) AWK=$(AWK) build_tools/make_version .)
283
284 ifneq ($(wildcard .version),)
285   ASTERISKVERSIONNUM:=$(shell $(AWK) -F. '{printf "%01d%02d%02d", $$1, $$2, $$3}' .version)
286 endif
287
288 ifneq ($(wildcard .svn),)
289   ASTERISKVERSIONNUM:=999999
290 endif
291
292 _ASTCFLAGS+=$(OPTIONS)
293
294 MOD_SUBDIRS:=channels pbx apps codecs formats cdr cel bridges funcs tests main res addons $(LOCAL_MOD_SUBDIRS)
295 OTHER_SUBDIRS:=utils agi
296 SUBDIRS:=$(OTHER_SUBDIRS) $(MOD_SUBDIRS)
297 SUBDIRS_INSTALL:=$(SUBDIRS:%=%-install)
298 SUBDIRS_CLEAN:=$(SUBDIRS:%=%-clean)
299 SUBDIRS_DIST_CLEAN:=$(SUBDIRS:%=%-dist-clean)
300 SUBDIRS_UNINSTALL:=$(SUBDIRS:%=%-uninstall)
301 MOD_SUBDIRS_EMBED_LDSCRIPT:=$(MOD_SUBDIRS:%=%-embed-ldscript)
302 MOD_SUBDIRS_EMBED_LDFLAGS:=$(MOD_SUBDIRS:%=%-embed-ldflags)
303 MOD_SUBDIRS_EMBED_LIBS:=$(MOD_SUBDIRS:%=%-embed-libs)
304 MOD_SUBDIRS_MENUSELECT_TREE:=$(MOD_SUBDIRS:%=%-menuselect-tree)
305
306 ifneq ($(findstring darwin,$(OSARCH)),)
307   _ASTCFLAGS+=-D__Darwin__
308   SOLINK=-bundle -Xlinker -macosx_version_min -Xlinker 10.4 -Xlinker -undefined -Xlinker dynamic_lookup -force_flat_namespace
309   ifeq ($(shell /usr/bin/sw_vers -productVersion | cut -c1-4),10.6)
310     SOLINK+=/usr/lib/bundle1.o
311   endif
312   _ASTLDFLAGS+=-L/usr/local/lib
313 else
314 # These are used for all but Darwin
315   SOLINK=-shared
316   ifneq ($(findstring BSD,$(OSARCH)),)
317     _ASTLDFLAGS+=-L/usr/local/lib
318   endif
319 endif
320
321 ifeq ($(OSARCH),SunOS)
322   SOLINK=-shared -fpic -L/usr/local/ssl/lib -lrt
323 endif
324
325 ifeq ($(OSARCH),OpenBSD)
326   SOLINK=-shared -fpic
327 endif
328
329 # comment to print directories during submakes
330 #PRINT_DIR=yes
331
332 ifneq ($(INSIDE_EMACS),)
333 PRINT_DIR=yes
334 endif
335
336 SILENTMAKE:=$(MAKE) --quiet --no-print-directory
337 ifneq ($(PRINT_DIR)$(NOISY_BUILD),)
338 SUBMAKE:=$(MAKE)
339 else
340 SUBMAKE:=$(MAKE) --quiet --no-print-directory
341 endif
342
343 # This is used when generating the doxygen documentation
344 ifneq ($(DOT),:)
345   HAVEDOT=yes
346 else
347   HAVEDOT=no
348 endif
349
350 # $(MAKE) is printed in several places, and we want it to be a
351 # fixed size string. Define a variable whose name has also the
352 # same size, so we can easily align text.
353 ifeq ($(MAKE), gmake)
354         mK="gmake"
355 else
356         mK=" make"
357 endif
358
359 all: _all
360         @echo " +--------- Asterisk Build Complete ---------+"  
361         @echo " + Asterisk has successfully been built, and +"  
362         @echo " + can be installed by running:              +"
363         @echo " +                                           +"
364         @echo " +               $(mK) install               +"  
365         @echo " +-------------------------------------------+"  
366
367 _all: cleantest makeopts $(SUBDIRS) doc/core-en_US.xml
368
369 makeopts: configure
370         @echo "****"
371         @echo "**** The configure script must be executed before running '$(MAKE)'." 
372         @echo "****               Please run \"./configure\"."
373         @echo "****"
374         @exit 1
375
376 menuselect.makeopts: menuselect/menuselect menuselect-tree makeopts build_tools/menuselect-deps $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
377         menuselect/menuselect --check-deps $@
378         menuselect/menuselect --check-deps $@ $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
379
380 $(MOD_SUBDIRS_EMBED_LDSCRIPT):
381         +@echo "EMBED_LDSCRIPTS+="`$(SILENTMAKE) -C $(@:-embed-ldscript=) SUBDIR=$(@:-embed-ldscript=) __embed_ldscript` >> makeopts.embed_rules
382
383 $(MOD_SUBDIRS_EMBED_LDFLAGS):
384         +@echo "EMBED_LDFLAGS+="`$(SILENTMAKE) -C $(@:-embed-ldflags=) SUBDIR=$(@:-embed-ldflags=) __embed_ldflags` >> makeopts.embed_rules
385
386 $(MOD_SUBDIRS_EMBED_LIBS):
387         +@echo "EMBED_LIBS+="`$(SILENTMAKE) -C $(@:-embed-libs=) SUBDIR=$(@:-embed-libs=) __embed_libs` >> makeopts.embed_rules
388
389 $(MOD_SUBDIRS_MENUSELECT_TREE):
390         +@$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) moduleinfo
391         +@$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) makeopts
392
393 makeopts.embed_rules: menuselect.makeopts
394         @echo "Generating embedded module rules ..."
395         @rm -f $@
396         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDSCRIPT)
397         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDFLAGS)
398         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LIBS)
399
400 $(SUBDIRS): main/version.c include/asterisk/version.h include/asterisk/build.h include/asterisk/buildopts.h defaults.h makeopts.embed_rules
401
402 ifeq ($(findstring $(OSARCH), mingw32 cygwin ),)
403     # Non-windows:
404     # ensure that all module subdirectories are processed before 'main' during
405     # a parallel build, since if there are modules selected to be embedded the
406     # directories containing them must be completed before the main Asterisk
407     # binary can be built
408 main: $(filter-out main,$(MOD_SUBDIRS))
409 else
410     # Windows: we need to build main (i.e. the asterisk dll) first,
411     # followed by res, followed by the other directories, because
412     # dll symbols must be resolved during linking and not at runtime.
413 D1:= $(filter-out main,$(MOD_SUBDIRS))
414 D1:= $(filter-out res,$(D1))
415
416 $(D1): res
417 res:    main
418 endif
419
420 $(MOD_SUBDIRS):
421         +@_ASTCFLAGS="$(MOD_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
422
423 $(OTHER_SUBDIRS):
424         +@_ASTCFLAGS="$(OTHER_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
425
426 defaults.h: makeopts
427         @build_tools/make_defaults_h > $@.tmp
428         @cmp -s $@.tmp $@ || mv $@.tmp $@
429         @rm -f $@.tmp
430
431 main/version.c: FORCE
432         @build_tools/make_version_c > $@.tmp
433         @cmp -s $@.tmp $@ || mv $@.tmp $@
434         @rm -f $@.tmp
435
436 include/asterisk/version.h: FORCE
437         @build_tools/make_version_h > $@.tmp
438         @cmp -s $@.tmp $@ || mv $@.tmp $@
439         @rm -f $@.tmp
440
441 include/asterisk/buildopts.h: menuselect.makeopts
442         @build_tools/make_buildopts_h > $@.tmp
443         @cmp -s $@.tmp $@ || mv $@.tmp $@
444         @rm -f $@.tmp
445
446 include/asterisk/build.h:
447         @build_tools/make_build_h > $@.tmp
448         @cmp -s $@.tmp $@ || mv $@.tmp $@
449         @rm -f $@.tmp
450
451 $(SUBDIRS_CLEAN):
452         +@$(SUBMAKE) -C $(@:-clean=) clean
453
454 $(SUBDIRS_DIST_CLEAN):
455         +@$(SUBMAKE) -C $(@:-dist-clean=) dist-clean
456
457 clean: $(SUBDIRS_CLEAN) _clean
458
459 _clean:
460         rm -f defaults.h
461         rm -f include/asterisk/build.h
462         rm -f main/version.c
463         rm -f include/asterisk/version.h
464         @$(MAKE) -C menuselect clean
465         cp -f .cleancount .lastclean
466
467 dist-clean: distclean
468
469 distclean: $(SUBDIRS_DIST_CLEAN) _clean
470         @$(MAKE) -C menuselect dist-clean
471         @$(MAKE) -C sounds dist-clean
472         rm -f menuselect.makeopts makeopts menuselect-tree menuselect.makedeps
473         rm -f makeopts.embed_rules
474         rm -f config.log config.status config.cache
475         rm -rf autom4te.cache
476         rm -f include/asterisk/autoconfig.h
477         rm -f include/asterisk/buildopts.h
478         rm -rf doc/api
479         rm -f build_tools/menuselect-deps
480
481 datafiles: _all
482         if [ `$(ID) -u` = 0 ]; then \
483                 CFLAGS="$(_ASTCFLAGS) $(ASTCFLAGS)" build_tools/mkpkgconfig $(DESTDIR)/usr/lib/pkgconfig; \
484         fi
485 # Should static HTTP be installed during make samples or even with its own target ala
486 # webvoicemail?  There are portions here that *could* be customized but might also be
487 # improved a lot.  I'll put it here for now.
488         mkdir -p $(DESTDIR)$(ASTDATADIR)/static-http
489         for x in static-http/*; do \
490                 $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTDATADIR)/static-http ; \
491         done
492         if [ -d doc/tex/asterisk ] ; then \
493                         mkdir -p $(DESTDIR)$(ASTDATADIR)/static-http/docs ; \
494                         for n in doc/tex/asterisk/* ; do \
495                                 $(INSTALL) -m 644 $$n $(DESTDIR)$(ASTDATADIR)/static-http/docs ; \
496                         done \
497         fi
498         mkdir -p $(DESTDIR)$(ASTDATADIR)/images
499         for x in images/*.jpg; do \
500                 $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTDATADIR)/images ; \
501         done
502         mkdir -p $(DESTDIR)$(AGI_DIR)
503         $(MAKE) -C sounds install
504
505 doc/core-en_US.xml: $(foreach dir,$(MOD_SUBDIRS),$(shell $(GREP) -l "language=\"en_US\"" $(dir)/*.c $(dir)/*.cc 2>/dev/null))
506         @printf "Building Documentation For: "
507         @echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $@
508         @echo "<!DOCTYPE docs SYSTEM \"appdocsxml.dtd\">" >> $@
509         @echo "<docs xmlns:xi=\"http://www.w3.org/2001/XInclude\">" >> $@
510         @for x in $(MOD_SUBDIRS); do \
511                 printf "$$x " ; \
512                 for i in $$x/*.c; do \
513                         $(AWK) -f build_tools/get_documentation $$i >> $@ ; \
514                 done ; \
515         done
516         @echo
517         @echo "</docs>" >> $@
518
519 validate-docs: doc/core-en_US.xml
520 ifeq ($(XMLSTARLET),:)
521         @echo "---------------------------------------------------------------"
522         @echo "--- Please install xmlstarlet to validate the documentation ---"
523         @echo "---------------------------------------------------------------"
524 else
525         $(XMLSTARLET) val -d doc/appdocsxml.dtd $<
526 endif
527
528 update: 
529         @if [ -d .svn ]; then \
530                 echo "Updating from Subversion..." ; \
531                 fromrev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
532                 svn update | tee update.out; \
533                 torev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
534                 echo "`date`  Updated from revision $${fromrev} to $${torev}." >> update.log; \
535                 rm -f .version; \
536                 if [ `grep -c ^C update.out` -gt 0 ]; then \
537                         echo ; echo "The following files have conflicts:" ; \
538                         grep ^C update.out | cut -b4- ; \
539                 fi ; \
540                 rm -f update.out; \
541         else \
542                 echo "Not under version control";  \
543         fi
544
545 NEWHEADERS=$(notdir $(wildcard include/asterisk/*.h))
546 OLDHEADERS=$(filter-out $(NEWHEADERS),$(notdir $(wildcard $(DESTDIR)$(ASTHEADERDIR)/*.h)))
547
548 installdirs:
549         mkdir -p $(DESTDIR)$(MODULES_DIR)
550         mkdir -p $(DESTDIR)$(ASTSBINDIR)
551         mkdir -p $(DESTDIR)$(ASTETCDIR)
552         mkdir -p $(DESTDIR)$(ASTBINDIR)
553         mkdir -p $(DESTDIR)$(ASTVARRUNDIR)
554         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/voicemail
555         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/dictate
556         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/system
557         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/tmp
558         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/meetme
559         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/monitor
560
561 bininstall: _all installdirs $(SUBDIRS_INSTALL)
562         $(INSTALL) -m 755 main/asterisk $(DESTDIR)$(ASTSBINDIR)/
563         $(LN) -sf asterisk $(DESTDIR)$(ASTSBINDIR)/rasterisk
564         $(INSTALL) -m 755 contrib/scripts/astgenkey $(DESTDIR)$(ASTSBINDIR)/
565         $(INSTALL) -m 755 contrib/scripts/autosupport $(DESTDIR)$(ASTSBINDIR)/
566         if [ ! -f $(DESTDIR)$(ASTSBINDIR)/safe_asterisk ]; then \
567                 cat contrib/scripts/safe_asterisk | sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > $(DESTDIR)$(ASTSBINDIR)/safe_asterisk ;\
568                 chmod 755 $(DESTDIR)$(ASTSBINDIR)/safe_asterisk;\
569         fi
570         $(INSTALL) -d $(DESTDIR)$(ASTHEADERDIR)
571         $(INSTALL) -d $(DESTDIR)$(ASTHEADERDIR)/doxygen
572         $(INSTALL) -m 644 include/asterisk.h $(DESTDIR)$(includedir)
573         $(INSTALL) -m 644 include/asterisk/*.h $(DESTDIR)$(ASTHEADERDIR)
574         $(INSTALL) -m 644 include/asterisk/doxygen/*.h $(DESTDIR)$(ASTHEADERDIR)/doxygen
575         if [ -n "$(OLDHEADERS)" ]; then \
576                 rm -f $(addprefix $(DESTDIR)$(ASTHEADERDIR)/,$(OLDHEADERS)) ;\
577         fi
578         mkdir -p $(DESTDIR)$(ASTDATADIR)/documentation
579         mkdir -p $(DESTDIR)$(ASTDATADIR)/documentation/thirdparty
580         mkdir -p $(DESTDIR)$(ASTLOGDIR)/cdr-csv
581         mkdir -p $(DESTDIR)$(ASTLOGDIR)/cdr-custom
582         mkdir -p $(DESTDIR)$(ASTLOGDIR)/cel-csv
583         mkdir -p $(DESTDIR)$(ASTLOGDIR)/cel-custom
584         mkdir -p $(DESTDIR)$(ASTDATADIR)/keys
585         mkdir -p $(DESTDIR)$(ASTDATADIR)/firmware
586         mkdir -p $(DESTDIR)$(ASTDATADIR)/firmware/iax
587         mkdir -p $(DESTDIR)$(ASTMANDIR)/man8
588         $(INSTALL) -m 644 doc/core-*.xml $(DESTDIR)$(ASTDATADIR)/documentation
589         $(INSTALL) -m 644 doc/appdocsxml.dtd $(DESTDIR)$(ASTDATADIR)/documentation
590         $(INSTALL) -m 644 keys/iaxtel.pub $(DESTDIR)$(ASTDATADIR)/keys
591         $(INSTALL) -m 644 keys/freeworlddialup.pub $(DESTDIR)$(ASTDATADIR)/keys
592         $(INSTALL) -m 644 doc/asterisk.8 $(DESTDIR)$(ASTMANDIR)/man8
593         $(INSTALL) -m 644 contrib/scripts/astgenkey.8 $(DESTDIR)$(ASTMANDIR)/man8
594         $(INSTALL) -m 644 contrib/scripts/autosupport.8 $(DESTDIR)$(ASTMANDIR)/man8
595         $(INSTALL) -m 644 contrib/scripts/safe_asterisk.8 $(DESTDIR)$(ASTMANDIR)/man8
596         if [ -f contrib/firmware/iax/iaxy.bin ] ; then \
597                 $(INSTALL) -m 644 contrib/firmware/iax/iaxy.bin $(DESTDIR)$(ASTDATADIR)/firmware/iax/iaxy.bin; \
598         fi
599
600 $(SUBDIRS_INSTALL):
601         +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" $(SUBMAKE) -C $(@:-install=) install
602
603 NEWMODS:=$(foreach d,$(MOD_SUBDIRS),$(notdir $(wildcard $(d)/*.so)))
604 OLDMODS=$(filter-out $(NEWMODS),$(notdir $(wildcard $(DESTDIR)$(MODULES_DIR)/*.so)))
605
606 oldmodcheck:
607         @if [ -n "$(OLDMODS)" ]; then \
608                 echo " WARNING WARNING WARNING" ;\
609                 echo "" ;\
610                 echo " Your Asterisk modules directory, located at" ;\
611                 echo " $(DESTDIR)$(MODULES_DIR)" ;\
612                 echo " contains modules that were not installed by this " ;\
613                 echo " version of Asterisk. Please ensure that these" ;\
614                 echo " modules are compatible with this version before" ;\
615                 echo " attempting to run Asterisk." ;\
616                 echo "" ;\
617                 for f in $(OLDMODS); do \
618                         echo "    $$f" ;\
619                 done ;\
620                 echo "" ;\
621                 echo " WARNING WARNING WARNING" ;\
622         fi
623
624 badshell:
625 ifneq ($(findstring ~,$(DESTDIR)),)
626         @echo "Your shell doesn't do ~ expansion when expected (specifically, when doing \"make install DESTDIR=~/path\")."
627         @echo "Try replacing ~ with \$$HOME, as in \"make install DESTDIR=\$$HOME/path\"."
628         @exit 1
629 endif
630
631 install: badshell datafiles bininstall
632         @if [ -x /usr/sbin/asterisk-post-install ]; then \
633                 /usr/sbin/asterisk-post-install $(DESTDIR) . ; \
634         fi
635         @echo " +---- Asterisk Installation Complete -------+"  
636         @echo " +                                           +"
637         @echo " +    YOU MUST READ THE SECURITY DOCUMENT    +"
638         @echo " +                                           +"
639         @echo " + Asterisk has successfully been installed. +"  
640         @echo " + If you would like to install the sample   +"  
641         @echo " + configuration files (overwriting any      +"
642         @echo " + existing config files), run:              +"  
643         @echo " +                                           +"
644         @echo " +               $(mK) samples               +"
645         @echo " +                                           +"
646         @echo " +-----------------  or ---------------------+"
647         @echo " +                                           +"
648         @echo " + You can go ahead and install the asterisk +"
649         @echo " + program documentation now or later run:   +"
650         @echo " +                                           +"
651         @echo " +              $(mK) progdocs               +"
652         @echo " +                                           +"
653         @echo " + **Note** This requires that you have      +"
654         @echo " + doxygen installed on your local system    +"
655         @echo " +-------------------------------------------+"
656         @$(MAKE) -s oldmodcheck
657
658 isntall: install
659
660 upgrade: bininstall
661
662 # XXX why *.adsi is installed first ?
663 adsi:
664         @echo Installing adsi config files...
665         @mkdir -p $(DESTDIR)$(ASTETCDIR)
666         @for x in configs/*.adsi; do \
667                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
668                 if [ -f $${dst} ] ; then \
669                         echo "Overwriting $$x" ; \
670                 else \
671                         echo "Installing $$x" ; \
672                 fi ; \
673                 $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x` ; \
674         done
675
676 samples: adsi
677         @echo Installing other config files...
678         @mkdir -p $(DESTDIR)$(ASTETCDIR)
679         @for x in configs/*.sample; do \
680                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x .sample`" ;        \
681                 if [ -f $${dst} ]; then \
682                         if [ "$(OVERWRITE)" = "y" ]; then \
683                                 if cmp -s $${dst} $$x ; then \
684                                         echo "Config file $$x is unchanged"; \
685                                         continue; \
686                                 fi ; \
687                                 mv -f $${dst} $${dst}.old ; \
688                         else \
689                                 echo "Skipping config file $$x"; \
690                                 continue; \
691                         fi ;\
692                 fi ; \
693                 echo "Installing file $$x"; \
694                 $(INSTALL) -m 644 $$x $${dst} ;\
695         done
696         @if [ "$(OVERWRITE)" = "y" ] || [ ! -f $(DESTDIR)$(ASTCONFPATH) ]; then \
697                 echo "Creating asterisk.conf"; \
698                 ( \
699                 echo "[directories](!) ; remove the (!) to enable this" ; \
700                 echo "astetcdir => $(ASTETCDIR)" ; \
701                 echo "astmoddir => $(MODULES_DIR)" ; \
702                 echo "astvarlibdir => $(ASTVARLIBDIR)" ; \
703                 echo "astdbdir => $(ASTDBDIR)" ; \
704                 echo "astkeydir => $(ASTKEYDIR)" ; \
705                 echo "astdatadir => $(ASTDATADIR)" ; \
706                 echo "astagidir => $(AGI_DIR)" ; \
707                 echo "astspooldir => $(ASTSPOOLDIR)" ; \
708                 echo "astrundir => $(ASTVARRUNDIR)" ; \
709                 echo "astlogdir => $(ASTLOGDIR)" ; \
710                 echo "" ; \
711                 echo "[options]" ; \
712                 echo ";verbose = 3" ; \
713                 echo ";debug = 3" ; \
714                 echo ";alwaysfork = yes ; same as -F at startup" ; \
715                 echo ";nofork = yes ; same as -f at startup" ; \
716                 echo ";quiet = yes ; same as -q at startup" ; \
717                 echo ";timestamp = yes ; same as -T at startup" ; \
718                 echo ";execincludes = yes ; support #exec in config files" ; \
719                 echo ";console = yes ; Run as console (same as -c at startup)" ; \
720                 echo ";highpriority = yes ; Run realtime priority (same as -p at startup)" ; \
721                 echo ";initcrypto = yes ; Initialize crypto keys (same as -i at startup)" ; \
722                 echo ";nocolor = yes ; Disable console colors" ; \
723                 echo ";dontwarn = yes ; Disable some warnings" ; \
724                 echo ";dumpcore = yes ; Dump core on crash (same as -g at startup)" ; \
725                 echo ";languageprefix = yes ; Use the new sound prefix path syntax" ; \
726                 echo ";internal_timing = yes" ; \
727                 echo ";systemname = my_system_name ; prefix uniqueid with a system name for global uniqueness issues" ; \
728                 echo ";autosystemname = yes ; automatically set systemname to hostname - uses 'localhost' on failure, or systemname if set" ; \
729                 echo ";maxcalls = 10 ; Maximum amount of calls allowed" ; \
730                 echo ";maxload = 0.9 ; Asterisk stops accepting new calls if the load average exceed this limit" ; \
731                 echo ";maxfiles = 1000 ; Maximum amount of openfiles" ; \
732                 echo ";minmemfree = 1 ; in MBs, Asterisk stops accepting new calls if the amount of free memory falls below this watermark" ; \
733                 echo ";cache_record_files = yes ; Cache recorded sound files to another directory during recording" ; \
734                 echo ";record_cache_dir = /tmp ; Specify cache directory (used in conjunction with cache_record_files)" ; \
735                 echo ";transmit_silence = yes ; Transmit silence while a channel is in a waiting state, a recording only state, or when DTMF is" ; \
736                 echo "                        ; being generated.  Note that the silence internally is generated in raw signed linear format." ; \
737                 echo "                        ; This means that it must be transcoded into the native format of the channel before it can be sent" ; \
738                 echo "                        ; to the device.  It is for this reason that this is optional, as it may result in requiring a" ; \
739                 echo "                        ; temporary codec translation path for a channel that may not otherwise require one." ; \
740                 echo ";transcode_via_sln = yes ; Build transcode paths via SLINEAR, instead of directly" ; \
741                 echo ";runuser = asterisk ; The user to run as" ; \
742                 echo ";rungroup = asterisk ; The group to run as" ; \
743                 echo ";lightbackground = yes ; If your terminal is set for a light-colored background" ; \
744                 echo "documentation_language = en_US ; Set the Language you want Documentation displayed in. Value is in the same format as locale names" ; \
745                 echo ";hideconnect = yes ; Hide messages displayed when a remote console connects and disconnects" ; \
746                 echo ";lockconfdir = no ; Protect the directory containing the configuration files (/etc/asterisk) with a lock" ; \
747                 echo "" ; \
748                 echo "; Changing the following lines may compromise your security." ; \
749                 echo ";[files]" ; \
750                 echo ";astctlpermissions = 0660" ; \
751                 echo ";astctlowner = root" ; \
752                 echo ";astctlgroup = apache" ; \
753                 echo ";astctl = asterisk.ctl" ; \
754                 echo "" ; \
755                 echo "[compat]" ; \
756                 echo "pbx_realtime=1.6" ; \
757                 echo "res_agi=1.6" ; \
758                 echo "app_set=1.6" ; \
759                 ) > $(DESTDIR)$(ASTCONFPATH) ; \
760         else \
761                 echo "Skipping asterisk.conf creation"; \
762         fi
763         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX
764         build_tools/make_sample_voicemail $(DESTDIR)/$(ASTDATADIR) $(DESTDIR)/$(ASTSPOOLDIR)
765         @mkdir -p $(DESTDIR)$(ASTDATADIR)/phoneprov
766         @for x in phoneprov/*; do \
767                 dst="$(DESTDIR)$(ASTDATADIR)/$$x" ;     \
768                 if [ -f $${dst} ]; then \
769                         if [ "$(OVERWRITE)" = "y" ]; then \
770                                 if cmp -s $${dst} $$x ; then \
771                                         echo "Config file $$x is unchanged"; \
772                                         continue; \
773                                 fi ; \
774                                 mv -f $${dst} $${dst}.old ; \
775                         else \
776                                 echo "Skipping config file $$x"; \
777                                 continue; \
778                         fi ;\
779                 fi ; \
780                 echo "Installing file $$x"; \
781                 $(INSTALL) -m 644 $$x $${dst} ;\
782         done
783
784 webvmail:
785         @[ -d $(DESTDIR)$(HTTP_DOCSDIR)/ ] || ( printf "http docs directory not found.\nUpdate assignment of variable HTTP_DOCSDIR in Makefile!\n" && exit 1 )
786         @[ -d $(DESTDIR)$(HTTP_CGIDIR) ] || ( printf "cgi-bin directory not found.\nUpdate assignment of variable HTTP_CGIDIR in Makefile!\n" && exit 1 )
787         $(INSTALL) -m 4755 -o root -g root contrib/scripts/vmail.cgi $(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi
788         mkdir -p $(DESTDIR)$(HTTP_DOCSDIR)/_asterisk
789         for x in images/*.gif; do \
790                 $(INSTALL) -m 644 $$x $(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/; \
791         done
792         @echo " +--------- Asterisk Web Voicemail ----------+"  
793         @echo " +                                           +"
794         @echo " + Asterisk Web Voicemail is installed in    +"
795         @echo " + your cgi-bin directory:                   +"
796         @echo " + $(DESTDIR)$(HTTP_CGIDIR)"
797         @echo " + IT USES A SETUID ROOT PERL SCRIPT, SO     +"
798         @echo " + IF YOU DON'T LIKE THAT, UNINSTALL IT!     +"
799         @echo " +                                           +"
800         @echo " + Other static items have been stored in:   +"
801         @echo " + $(DESTDIR)$(HTTP_DOCSDIR)"
802         @echo " +                                           +"
803         @echo " + If these paths do not match your httpd    +"
804         @echo " + installation, correct the definitions     +"
805         @echo " + in your Makefile of HTTP_CGIDIR and       +"
806         @echo " + HTTP_DOCSDIR                              +"
807         @echo " +                                           +"
808         @echo " +-------------------------------------------+"  
809
810 progdocs:
811         (cat contrib/asterisk-ng-doxygen; echo "HAVE_DOT=$(HAVEDOT)"; \
812         echo "PROJECT_NUMBER=$(ASTERISKVERSION)") | doxygen - 
813
814 install-logrotate:
815         if [ ! -d $(ASTETCDIR)/../logrotate.d ]; then \
816                 mkdir $(ASTETCDIR)/../logrotate.d ; \
817         fi
818         sed 's#__LOGDIR__#$(ASTLOGDIR)#g' < contrib/scripts/asterisk.logrotate | sed 's#__SBINDIR__#$(ASTSBINDIR)#g' > contrib/scripts/asterisk.logrotate.tmp
819         install -m 0644 contrib/scripts/asterisk.logrotate.tmp $(ASTETCDIR)/../logrotate.d/asterisk
820         rm -f contrib/scripts/asterisk.logrotate.tmp
821
822 config:
823         @if [ "${OSARCH}" = "linux-gnu" ]; then \
824                 if [ -f /etc/redhat-release -o -f /etc/fedora-release ]; then \
825                         cat contrib/init.d/rc.redhat.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > $(DESTDIR)/etc/rc.d/init.d/asterisk ;\
826                         chmod 755 $(DESTDIR)/etc/rc.d/init.d/asterisk;\
827                         if [ ! -f /etc/sysconfig/asterisk ]; then install -m 644 contrib/init.d/etc_default_asterisk /etc/sysconfig/asterisk ; fi ;\
828                         if [ -z "$(DESTDIR)" ]; then /sbin/chkconfig --add asterisk; fi; \
829                 elif [ -f /etc/debian_version ]; then \
830                         cat contrib/init.d/rc.debian.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > $(DESTDIR)/etc/init.d/asterisk ;\
831                         chmod 755 $(DESTDIR)/etc/init.d/asterisk;\
832                         if [ ! -f /etc/default/asterisk ]; then install -m 644 contrib/init.d/etc_default_asterisk /etc/default/asterisk ; fi ;\
833                         if [ -z "$(DESTDIR)" ]; then /usr/sbin/update-rc.d asterisk defaults 50 91; fi; \
834                 elif [ -f /etc/gentoo-release ]; then \
835                         cat contrib/init.d/rc.gentoo.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > $(DESTDIR)/etc/init.d/asterisk ;\
836                         chmod 755 $(DESTDIR)/etc/init.d/asterisk;\
837                         if [ -z "$(DESTDIR)" ]; then /sbin/rc-update add asterisk default; fi; \
838                 elif [ -f /etc/mandrake-release -o -f /etc/mandriva-release ]; then \
839                         cat contrib/init.d/rc.mandriva.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > $(DESTDIR)/etc/rc.d/init.d/asterisk ;\
840                         chmod 755 $(DESTDIR)/etc/rc.d/init.d/asterisk;\
841                         if [ ! -f /etc/sysconfig/asterisk ]; then install -m 644 contrib/init.d/etc_default_asterisk /etc/sysconfig/asterisk ; fi ;\
842                         if [ -z "$(DESTDIR)" ]; then /sbin/chkconfig --add asterisk; fi; \
843                 elif [ -f /etc/SuSE-release -o -f /etc/novell-release ]; then \
844                         cat contrib/init.d/rc.suse.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > $(DESTDIR)/etc/init.d/asterisk ;\
845                         chmod 755 $(DESTDIR)/etc/init.d/asterisk;\
846                         if [ ! -f /etc/sysconfig/asterisk ]; then install -m 644 contrib/init.d/etc_default_asterisk /etc/sysconfig/asterisk ; fi ;\
847                         if [ -z "$(DESTDIR)" ]; then /sbin/chkconfig --add asterisk; fi; \
848                 elif [ -f /etc/arch-release -o -f /etc/arch-release ]; then \
849                         cat contrib/init.d/rc.archlinux.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > $(DESTDIR)/etc/rc.d/asterisk ;\
850                         chmod 755 $(DESTDIR)/etc/rc.d/asterisk;\
851                 elif [ -f /etc/slackware-version ]; then \
852                         echo "Slackware is not currently supported, although an init script does exist for it."; \
853                 else \
854                         echo "We could not install init scripts for your distribution."; \
855                 fi \
856         else \
857                 echo "We could not install init scripts for your operating system."; \
858         fi
859
860 sounds:
861         $(MAKE) -C sounds all
862
863 # If the cleancount has been changed, force a make clean.
864 # .cleancount is the global clean count, and .lastclean is the 
865 # last clean count we had
866
867 cleantest:
868         @cmp -s .cleancount .lastclean || $(MAKE) clean
869
870 $(SUBDIRS_UNINSTALL):
871         +@$(SUBMAKE) -C $(@:-uninstall=) uninstall
872
873 _uninstall: $(SUBDIRS_UNINSTALL)
874         rm -f $(DESTDIR)$(MODULES_DIR)/*
875         rm -f $(DESTDIR)$(ASTSBINDIR)/*asterisk*
876         rm -f $(DESTDIR)$(ASTSBINDIR)/astgenkey
877         rm -f $(DESTDIR)$(ASTSBINDIR)/autosupport
878         rm -rf $(DESTDIR)$(ASTHEADERDIR)
879         rm -rf $(DESTDIR)$(ASTDATADIR)/firmware
880         rm -f $(DESTDIR)$(ASTMANDIR)/man8/asterisk.8
881         rm -f $(DESTDIR)$(ASTMANDIR)/man8/astgenkey.8
882         rm -f $(DESTDIR)$(ASTMANDIR)/man8/autosupport.8
883         rm -f $(DESTDIR)$(ASTMANDIR)/man8/safe_asterisk.8
884         $(MAKE) -C sounds uninstall
885
886 uninstall: _uninstall
887         @echo " +--------- Asterisk Uninstall Complete -----+"  
888         @echo " + Asterisk binaries, sounds, man pages,     +"  
889         @echo " + headers, modules, and firmware builds,    +"  
890         @echo " + have all been uninstalled.                +"  
891         @echo " +                                           +"
892         @echo " + To remove ALL traces of Asterisk,         +"
893         @echo " + including configuration, spool            +"
894         @echo " + directories, and logs, run the following  +"
895         @echo " + command:                                  +"
896         @echo " +                                           +"
897         @echo " +            $(mK) uninstall-all            +"  
898         @echo " +-------------------------------------------+"  
899
900 uninstall-all: _uninstall
901         rm -rf $(DESTDIR)$(ASTLIBDIR)
902         rm -rf $(DESTDIR)$(ASTVARLIBDIR)
903         rm -rf $(DESTDIR)$(ASTDATADIR)
904         rm -rf $(DESTDIR)$(ASTSPOOLDIR)
905         rm -rf $(DESTDIR)$(ASTETCDIR)
906         rm -rf $(DESTDIR)$(ASTLOGDIR)
907
908 menuconfig: menuselect
909
910 cmenuconfig: cmenuselect
911
912 gmenuconfig: gmenuselect
913
914 nmenuconfig: nmenuselect
915
916 menuselect: menuselect/cmenuselect menuselect/nmenuselect menuselect/gmenuselect
917         @if [ -x menuselect/nmenuselect ]; then \
918                 $(MAKE) nmenuselect; \
919         elif [ -x menuselect/cmenuselect ]; then \
920                 $(MAKE) cmenuselect; \
921         elif [ -x menuselect/gmenuselect ]; then \
922                 $(MAKE) gmenuselect; \
923         else \
924                 echo "No menuselect user interface found. Install ncurses,"; \
925                 echo "newt or GTK libraries to build one and re-rerun"; \
926                 echo "'make menuselect'."; \
927         fi
928
929 cmenuselect: menuselect/cmenuselect menuselect-tree menuselect.makeopts
930         -@menuselect/cmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
931
932 gmenuselect: menuselect/gmenuselect menuselect-tree menuselect.makeopts
933         -@menuselect/gmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
934
935 nmenuselect: menuselect/nmenuselect menuselect-tree menuselect.makeopts
936         -@menuselect/nmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
937
938 # options for make in menuselect/
939 MAKE_MENUSELECT=CC="$(HOST_CC)" CXX="$(CXX)" LD="" AR="" RANLIB="" CFLAGS="" $(MAKE) -C menuselect CONFIGURE_SILENT="--silent"
940
941 menuselect/menuselect: menuselect/makeopts
942         +$(MAKE_MENUSELECT) menuselect
943
944 menuselect/cmenuselect: menuselect/makeopts
945         +$(MAKE_MENUSELECT) cmenuselect
946
947 menuselect/gmenuselect: menuselect/makeopts
948         +$(MAKE_MENUSELECT) gmenuselect
949
950 menuselect/nmenuselect: menuselect/makeopts
951         +$(MAKE_MENUSELECT) nmenuselect
952
953 menuselect/makeopts: makeopts
954         +$(MAKE_MENUSELECT) makeopts
955
956 menuselect-tree: $(foreach dir,$(filter-out main,$(MOD_SUBDIRS)),$(wildcard $(dir)/*.c) $(wildcard $(dir)/*.cc)) build_tools/cflags.xml build_tools/cflags-devmode.xml sounds/sounds.xml build_tools/embed_modules.xml utils/utils.xml agi/agi.xml configure
957         @echo "Generating input for menuselect ..."
958         @echo "<?xml version=\"1.0\"?>" > $@
959         @echo >> $@
960         @echo "<menu name=\"Asterisk Module and Build Option Selection\">" >> $@
961         +@for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SILENTMAKE) -C $${dir} SUBDIR=$${dir} moduleinfo >> $@; done
962         @cat build_tools/cflags.xml >> $@
963         +@for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SILENTMAKE) -C $${dir} SUBDIR=$${dir} makeopts >> $@; done
964         @if [ "${AST_DEVMODE}" = "yes" ]; then \
965                 cat build_tools/cflags-devmode.xml >> $@; \
966         fi
967         @cat utils/utils.xml >> $@
968         @cat agi/agi.xml >> $@
969         @cat build_tools/embed_modules.xml >> $@
970         @cat sounds/sounds.xml >> $@
971         @echo "</menu>" >> $@
972
973 pdf: asterisk.pdf
974 asterisk.pdf:
975         $(MAKE) -C doc/tex asterisk.pdf
976
977 .PHONY: menuselect
978 .PHONY: main
979 .PHONY: sounds
980 .PHONY: clean
981 .PHONY: dist-clean
982 .PHONY: distclean
983 .PHONY: all
984 .PHONY: prereqs
985 .PHONY: cleantest
986 .PHONY: uninstall
987 .PHONY: _uninstall
988 .PHONY: uninstall-all
989 .PHONY: pdf
990 .PHONY: dont-optimize
991 .PHONY: badshell
992 .PHONY: installdirs
993 .PHONY: validate-docs
994 .PHONY: _clean
995 .PHONY: $(SUBDIRS_INSTALL)
996 .PHONY: $(SUBDIRS_DIST_CLEAN)
997 .PHONY: $(SUBDIRS_CLEAN)
998 .PHONY: $(SUBDIRS_UNINSTALL)
999 .PHONY: $(SUBDIRS)
1000 .PHONY: $(MOD_SUBDIRS_EMBED_LDSCRIPT)
1001 .PHONY: $(MOD_SUBDIRS_EMBED_LDFLAGS)
1002 .PHONY: $(MOD_SUBDIRS_EMBED_LIBS)
1003
1004 FORCE:
1005