Fix documentation replication issues
[asterisk/asterisk.git] / Makefile
1 #
2 # Asterisk -- An open source telephony toolkit.
3 #
4 # Top level Makefile
5 #
6 # Copyright (C) 1999-2010, Digium, Inc.
7 #
8 # Mark Spencer <markster@digium.com>
9 #
10 # This program is free software, distributed under the terms of
11 # the GNU General Public License
12 #
13
14 # All Makefiles use the following variables:
15 #
16 # ASTCFLAGS - compiler options provided by the user (if any)
17 # _ASTCFLAGS - compiler options provided by the build system
18 # ASTLDFLAGS - linker flags (not libraries) provided by the user (if any)
19 # _ASTLDFLAGS - linker flags (not libraries) provided by the build system
20 # LIBS - additional libraries, at top-level for all links,
21 #      on a single object just for that object
22 # SOLINK - linker flags used only for creating dynamically loadable modules
23 #          as .so files
24 # DYLINK - linker flags used only for creating shared libaries
25 #          (.so files on Unix-type platforms, .dylib on Darwin)
26 #
27 # Values for ASTCFLAGS and ASTLDFLAGS can be specified in the
28 # environment when running make, as follows:
29 #
30 #       $ ASTCFLAGS="-Werror" make ...
31 #
32 # or as a variable value on the make command line itself:
33 #
34 #       $ make ASTCFLAGS="-Werror" ...
35
36 export ASTTOPDIR                # Top level dir, used in subdirs' Makefiles
37 export ASTERISKVERSION
38 export ASTERISKVERSIONNUM
39
40 #--- values used for default paths
41
42 # DESTDIR is the staging (or final) directory where files are copied
43 # during the install process. Define it before 'export', otherwise
44 # export will set it to the empty string making ?= fail.
45 # Trying to run asterisk from the DESTDIR is completely unsupported
46 # behavior.
47 # WARNING: do not put spaces or comments after the value.
48 DESTDIR?=$(INSTALL_PATH)
49 export DESTDIR
50
51 export INSTALL_PATH       # Additional prefix for the following paths
52 export ASTETCDIR          # Path for config files
53 export ASTVARRUNDIR
54 export ASTSPOOLDIR
55 export ASTVARLIBDIR
56 export ASTDATADIR
57 export ASTDBDIR
58 export ASTLOGDIR
59 export ASTLIBDIR
60 export ASTMODDIR
61 export ASTMANDIR
62 export ASTHEADERDIR
63 export ASTSBINDIR
64 export AGI_DIR
65 export ASTCONFPATH
66 export ASTKEYDIR
67
68 export OSARCH             # Operating system
69
70 export NOISY_BUILD        # Used in Makefile.rules
71 export MENUSELECT_CFLAGS  # Options selected in menuselect.
72 export AST_DEVMODE        # Set to "yes" for additional compiler
73                           # and runtime checks
74 export AST_DEVMODE_STRICT # Enables shadow warnings (-Wshadow)
75
76 export _SOLINK            # linker flags for all shared objects
77 export SOLINK             # linker flags for loadable modules
78 export DYLINK             # linker flags for shared libraries
79 export STATIC_BUILD       # Additional cflags, set to -static
80                           # for static builds. Probably
81                           # should go directly to ASTLDFLAGS
82
83 #--- paths to various commands
84 # The makeopts include below tries to set these if they're found during
85 # configure.
86 export CC
87 export CXX
88 export AR
89 export RANLIB
90 export HOST_CC
91 export BUILD_CC
92 export INSTALL
93 export STRIP
94 export DOWNLOAD
95 export AWK
96 export GREP
97 export MD5
98 export WGET_EXTRA_ARGS
99 export LDCONFIG
100 export LDCONFIG_FLAGS
101 export PYTHON
102
103 -include makeopts
104
105 # start the primary CFLAGS and LDFLAGS with any that were provided
106 # to the configure script
107 _ASTCFLAGS:=$(CONFIG_CFLAGS)
108 _ASTLDFLAGS:=$(CONFIG_LDFLAGS)
109
110 # Some build systems, such as the one in openwrt, like to pass custom target
111 # CFLAGS and LDFLAGS in the COPTS and LDOPTS variables; these should also
112 # go before any build-system computed flags, since they are defaults, not
113 # overrides
114 _ASTCFLAGS+=$(COPTS)
115 _ASTLDFLAGS+=$(LDOPTS)
116
117 # libxml2 cflags
118 _ASTCFLAGS+=$(LIBXML2_INCLUDE)
119
120 #Uncomment this to see all build commands instead of 'quiet' output
121 #NOISY_BUILD=yes
122
123 empty:=
124 space:=$(empty) $(empty)
125 ASTTOPDIR:=$(subst $(space),\$(space),$(CURDIR))
126
127 # Overwite config files on "make samples"
128 OVERWRITE=y
129
130 # Include debug and macro symbols in the executables (-g) and profiling info (-pg)
131 DEBUG=-g3
132
133 # Asterisk.conf is located in ASTETCDIR or by using the -C flag
134 # when starting Asterisk
135 ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
136 AGI_DIR=$(ASTDATADIR)/agi-bin
137
138 # If you use Apache, you may determine by a grep 'DocumentRoot' of your httpd.conf file
139 HTTP_DOCSDIR=/var/www/html
140 # Determine by a grep 'ScriptAlias' of your Apache httpd.conf file
141 HTTP_CGIDIR=/var/www/cgi-bin
142
143 # If your platform's linker expects a prefix on symbols generated from compiling C
144 # source files, set LINKER_SYMBOL_PREFIX to that value. On some systems, exported symbols
145 # from C source files are prefixed with '_', for example. If this value is not set
146 # properly, the linker scripts that live in the '*.exports' files in various places
147 # in this tree will unintentionally suppress symbols that should be visible
148 # in the final binary objects.
149 LINKER_SYMBOL_PREFIX=
150
151 # Uncomment this to use the older DSP routines
152 #_ASTCFLAGS+=-DOLD_DSP_ROUTINES
153
154 # If the file .asterisk.makeopts is present in your home directory, you can
155 # include all of your favorite menuselect options so that every time you download
156 # a new version of Asterisk, you don't have to run menuselect to set them.
157 # The file /etc/asterisk.makeopts will also be included but can be overridden
158 # by the file in your home directory.
159
160 GLOBAL_MAKEOPTS=$(wildcard /etc/asterisk.makeopts)
161 USER_MAKEOPTS=$(wildcard ~/.asterisk.makeopts)
162
163 MOD_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
164 OTHER_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
165
166 # Create OPTIONS variable, but probably we can assign directly to ASTCFLAGS
167 OPTIONS=
168
169 ifeq ($(OSARCH),linux-gnu)
170   # flag to tell 'ldconfig' to only process specified directories
171   LDCONFIG_FLAGS=-n
172 endif
173
174 ifeq ($(findstring -save-temps,$(_ASTCFLAGS) $(ASTCFLAGS)),)
175   ifeq ($(findstring -pipe,$(_ASTCFLAGS) $(ASTCFLAGS)),)
176     _ASTCFLAGS+=-pipe
177   endif
178 endif
179
180 ifeq ($(findstring -Wall,$(_ASTCFLAGS) $(ASTCFLAGS)),)
181   _ASTCFLAGS+=-Wall
182 endif
183
184 _ASTCFLAGS+=-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(AST_NESTED_FUNCTIONS) $(DEBUG)
185 ADDL_TARGETS=
186
187 ifeq ($(AST_DEVMODE),yes)
188   _ASTCFLAGS+=-Werror
189   _ASTCFLAGS+=-Wunused
190   _ASTCFLAGS+=$(AST_DECLARATION_AFTER_STATEMENT)
191   _ASTCFLAGS+=$(AST_FORTIFY_SOURCE)
192   _ASTCFLAGS+=$(AST_TRAMPOLINES)
193   _ASTCFLAGS+=-Wundef
194   _ASTCFLAGS+=-Wmissing-format-attribute
195   _ASTCFLAGS+=-Wformat=2
196   ifeq ($(AST_DEVMODE_STRICT),yes)
197     _ASTCFLAGS+=-Wshadow
198   endif
199   ADDL_TARGETS+=validate-docs
200 endif
201
202 ifneq ($(findstring BSD,$(OSARCH)),)
203   _ASTCFLAGS+=-isystem /usr/local/include
204 endif
205
206 ifeq ($(OSARCH),FreeBSD)
207   # -V is understood by BSD Make, not by GNU make.
208   BSDVERSION=$(shell make -V OSVERSION -f /usr/share/mk/bsd.port.subdir.mk)
209   _ASTCFLAGS+=$(shell if test $(BSDVERSION) -lt 500016 ; then echo "-D_THREAD_SAFE"; fi)
210   # flag to tell 'ldconfig' to only process specified directories
211   LDCONFIG_FLAGS=-m
212 endif
213
214 ifeq ($(OSARCH),NetBSD)
215   _ASTCFLAGS+=-pthread -I/usr/pkg/include
216 endif
217
218 ifeq ($(OSARCH),OpenBSD)
219   _ASTCFLAGS+=-pthread -ftrampolines
220 endif
221
222 ifeq ($(OSARCH),SunOS)
223   _ASTCFLAGS+=-Wcast-align -DSOLARIS -I../include/solaris-compat -I/opt/ssl/include -I/usr/local/ssl/include -D_XPG4_2 -D__EXTENSIONS__
224 endif
225
226 ifneq ($(GREP),)
227   ASTERISKVERSION:=$(shell GREP=$(GREP) AWK=$(AWK) GIT=$(GIT) build_tools/make_version .)
228 endif
229 ifneq ($(AWK),)
230   ifneq ($(wildcard .version),)
231     ASTERISKVERSIONNUM:=$(shell $(AWK) -F. '{printf "%01d%02d%02d", $$1, $$2, $$3}' .version)
232   endif
233 endif
234
235 ifneq ($(wildcard .svn),)
236   ASTERISKVERSIONNUM:=999999
237 endif
238
239 _ASTCFLAGS+=$(OPTIONS)
240
241 MOD_SUBDIRS:=channels pbx apps codecs formats cdr cel bridges funcs tests main res addons $(LOCAL_MOD_SUBDIRS)
242 OTHER_SUBDIRS:=utils agi
243 SUBDIRS:=$(OTHER_SUBDIRS) $(MOD_SUBDIRS)
244 SUBDIRS_INSTALL:=$(SUBDIRS:%=%-install)
245 SUBDIRS_CLEAN:=$(SUBDIRS:%=%-clean)
246 SUBDIRS_DIST_CLEAN:=$(SUBDIRS:%=%-dist-clean)
247 SUBDIRS_UNINSTALL:=$(SUBDIRS:%=%-uninstall)
248 MOD_SUBDIRS_EMBED_LDSCRIPT:=$(MOD_SUBDIRS:%=%-embed-ldscript)
249 MOD_SUBDIRS_EMBED_LDFLAGS:=$(MOD_SUBDIRS:%=%-embed-ldflags)
250 MOD_SUBDIRS_EMBED_LIBS:=$(MOD_SUBDIRS:%=%-embed-libs)
251 MOD_SUBDIRS_MENUSELECT_TREE:=$(MOD_SUBDIRS:%=%-menuselect-tree)
252
253 ifneq ($(findstring darwin,$(OSARCH)),)
254   _ASTCFLAGS+=-D__Darwin__ -mmacosx-version-min=10.6
255   _SOLINK=-mmacosx-version-min=10.6 -Xlinker -undefined -Xlinker dynamic_lookup
256   _SOLINK+=/usr/lib/bundle1.o
257   SOLINK=-bundle $(_SOLINK)
258   DYLINK=-Xlinker -dylib $(_SOLINK)
259   _ASTLDFLAGS+=-L/usr/local/lib
260 else
261 # These are used for all but Darwin
262   SOLINK=-shared
263   DYLINK=$(SOLINK)
264   ifneq ($(findstring BSD,$(OSARCH)),)
265     _ASTLDFLAGS+=-L/usr/local/lib
266   endif
267 endif
268
269 # Include rpath settings
270 _ASTLDFLAGS+=$(AST_RPATH)
271
272 ifeq ($(OSARCH),SunOS)
273   SOLINK=-shared -fpic -L/usr/local/ssl/lib -lrt
274   DYLINK=$(SOLINK)
275 endif
276
277 ifeq ($(OSARCH),OpenBSD)
278   SOLINK=-shared -fpic
279   DYLINK=$(SOLINK)
280 endif
281
282 # comment to print directories during submakes
283 #PRINT_DIR=yes
284
285 ifneq ($(INSIDE_EMACS),)
286 PRINT_DIR=yes
287 endif
288
289 SILENTMAKE:=$(MAKE) --quiet --no-print-directory
290 ifneq ($(PRINT_DIR)$(NOISY_BUILD),)
291 SUBMAKE:=$(MAKE)
292 else
293 SUBMAKE:=$(MAKE) --quiet --no-print-directory
294 endif
295
296 # $(MAKE) is printed in several places, and we want it to be a
297 # fixed size string. Define a variable whose name has also the
298 # same size, so we can easily align text.
299 ifeq ($(MAKE), gmake)
300         mK="gmake"
301 else
302         mK=" make"
303 endif
304
305 all: _all
306         @echo " +--------- Asterisk Build Complete ---------+"
307         @echo " + Asterisk has successfully been built, and +"
308         @echo " + can be installed by running:              +"
309         @echo " +                                           +"
310         @echo " +               $(mK) install               +"
311         @echo " +-------------------------------------------+"
312
313 full: _full
314         @echo " +--------- Asterisk Build Complete ---------+"
315         @echo " + Asterisk has successfully been built, and +"
316         @echo " + can be installed by running:              +"
317         @echo " +                                           +"
318         @echo " +               $(mK) install               +"
319         @echo " +-------------------------------------------+"
320
321
322 _all: makeopts $(SUBDIRS) doc/core-en_US.xml $(ADDL_TARGETS)
323
324 _full: makeopts $(SUBDIRS) doc/full-en_US.xml $(ADDL_TARGETS)
325
326 makeopts: configure
327         @echo "****"
328         @echo "**** The configure script must be executed before running '$(MAKE)'."
329         @echo "****               Please run \"./configure\"."
330         @echo "****"
331         @exit 1
332
333 menuselect.makeopts: menuselect/menuselect menuselect-tree makeopts build_tools/menuselect-deps $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
334 ifeq ($(filter %menuselect,$(MAKECMDGOALS)),)
335         menuselect/menuselect --check-deps $@
336         menuselect/menuselect --check-deps $@ $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
337 endif
338
339 $(MOD_SUBDIRS_EMBED_LDSCRIPT):
340         +@echo "EMBED_LDSCRIPTS+="`$(SILENTMAKE) -C $(@:-embed-ldscript=) SUBDIR=$(@:-embed-ldscript=) __embed_ldscript` >> makeopts.embed_rules
341
342 $(MOD_SUBDIRS_EMBED_LDFLAGS):
343         +@echo "EMBED_LDFLAGS+="`$(SILENTMAKE) -C $(@:-embed-ldflags=) SUBDIR=$(@:-embed-ldflags=) __embed_ldflags` >> makeopts.embed_rules
344
345 $(MOD_SUBDIRS_EMBED_LIBS):
346         +@echo "EMBED_LIBS+="`$(SILENTMAKE) -C $(@:-embed-libs=) SUBDIR=$(@:-embed-libs=) __embed_libs` >> makeopts.embed_rules
347
348 $(MOD_SUBDIRS_MENUSELECT_TREE):
349         +@$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) moduleinfo
350         +@$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) makeopts
351
352 makeopts.embed_rules: menuselect.makeopts
353         @echo "Generating embedded module rules ..."
354         @rm -f $@
355         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDSCRIPT)
356         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDFLAGS)
357         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LIBS)
358
359 $(SUBDIRS): makeopts .lastclean main/version.c include/asterisk/build.h include/asterisk/buildopts.h defaults.h makeopts.embed_rules
360
361 ifeq ($(findstring $(OSARCH), mingw32 cygwin ),)
362     # Non-windows:
363     # ensure that all module subdirectories are processed before 'main' during
364     # a parallel build, since if there are modules selected to be embedded the
365     # directories containing them must be completed before the main Asterisk
366     # binary can be built
367 main: $(filter-out main,$(MOD_SUBDIRS))
368 else
369     # Windows: we need to build main (i.e. the asterisk dll) first,
370     # followed by res, followed by the other directories, because
371     # dll symbols must be resolved during linking and not at runtime.
372 D1:= $(filter-out main,$(MOD_SUBDIRS))
373 D1:= $(filter-out res,$(D1))
374
375 $(D1): res
376 res:    main
377 endif
378
379 $(MOD_SUBDIRS): makeopts
380         +@_ASTCFLAGS="$(MOD_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
381
382 $(OTHER_SUBDIRS): makeopts
383         +@_ASTCFLAGS="$(OTHER_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
384
385 defaults.h: makeopts .lastclean build_tools/make_defaults_h
386         @build_tools/make_defaults_h > $@.tmp
387         @cmp -s $@.tmp $@ || mv $@.tmp $@
388         @rm -f $@.tmp
389
390 main/version.c: FORCE .lastclean
391         @build_tools/make_version_c > $@.tmp
392         @cmp -s $@.tmp $@ || mv $@.tmp $@
393         @rm -f $@.tmp
394
395 include/asterisk/buildopts.h: menuselect.makeopts .lastclean
396         @build_tools/make_buildopts_h > $@.tmp
397         @cmp -s $@.tmp $@ || mv $@.tmp $@
398         @rm -f $@.tmp
399
400 # build.h must depend on .lastclean, or parallel make may wipe it out after it's
401 # been created.
402 include/asterisk/build.h: .lastclean
403         @build_tools/make_build_h > $@
404
405 $(SUBDIRS_CLEAN):
406         +@$(SUBMAKE) -C $(@:-clean=) clean
407
408 $(SUBDIRS_DIST_CLEAN):
409         +@$(SUBMAKE) -C $(@:-dist-clean=) dist-clean
410
411 clean: $(SUBDIRS_CLEAN) _clean
412
413 _clean:
414         rm -f defaults.h
415         rm -f include/asterisk/build.h
416         rm -f main/version.c
417         rm -f doc/core-en_US.xml
418         rm -f doc/full-en_US.xml
419         rm -f docs/rest-api/*.wiki
420         @$(MAKE) -C menuselect clean
421         cp -f .cleancount .lastclean
422
423 dist-clean: distclean
424
425 distclean: $(SUBDIRS_DIST_CLEAN) _clean
426         @$(MAKE) -C menuselect dist-clean
427         @$(MAKE) -C sounds dist-clean
428         rm -f menuselect.makeopts makeopts menuselect-tree menuselect.makedeps
429         rm -f makeopts.embed_rules
430         rm -f config.log config.status config.cache
431         rm -rf autom4te.cache
432         rm -f include/asterisk/autoconfig.h
433         rm -f include/asterisk/buildopts.h
434         rm -rf doc/api
435         rm -f build_tools/menuselect-deps
436
437 datafiles: _all doc/core-en_US.xml
438         CFLAGS="$(_ASTCFLAGS) $(ASTCFLAGS)" build_tools/mkpkgconfig "$(DESTDIR)$(libdir)/pkgconfig";
439 # Should static HTTP be installed during make samples or even with its own target ala
440 # webvoicemail?  There are portions here that *could* be customized but might also be
441 # improved a lot.  I'll put it here for now.
442
443         for x in static-http/*; do \
444                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/static-http" ; \
445         done
446         $(INSTALL) -m 644 doc/core-en_US.xml "$(DESTDIR)$(ASTDATADIR)/static-http";
447         $(INSTALL) -m 644 doc/snapshots.xslt "$(DESTDIR)$(ASTDATADIR)/static-http";
448         if [ -d doc/tex/asterisk ] ; then \
449                 $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/static-http/docs" ; \
450                 for n in doc/tex/asterisk/* ; do \
451                         $(INSTALL) -m 644 $$n "$(DESTDIR)$(ASTDATADIR)/static-http/docs" ; \
452                 done \
453         fi
454         for x in images/*.jpg; do \
455                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/images" ; \
456         done
457         $(MAKE) -C sounds install
458         find rest-api -name "*.json" | while read x; do \
459                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/rest-api" ; \
460         done
461
462 ifneq ($(GREP),)
463   XML_core_en_US = $(foreach dir,$(MOD_SUBDIRS),$(shell $(GREP) -l "language=\"en_US\"" $(dir)/*.c $(dir)/*.cc 2>/dev/null))
464 endif
465
466 doc/core-en_US.xml: makeopts .lastclean $(XML_core_en_US)
467         @printf "Building Documentation For: "
468         @echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $@
469         @echo "<!DOCTYPE docs SYSTEM \"appdocsxml.dtd\">" >> $@
470         @echo "<?xml-stylesheet type=\"text/xsl\" href=\"snapshots.xslt\"?>" > $@
471         @echo "<docs xmlns:xi=\"http://www.w3.org/2001/XInclude\">" >> $@
472         @for x in $(MOD_SUBDIRS); do \
473                 printf "$$x " ; \
474                 for i in `find $$x -name '*.c'`; do \
475                         $(AWK) -f build_tools/get_documentation $$i >> $@ ; \
476                 done ; \
477         done
478         @echo
479         @echo "</docs>" >> $@
480
481 ifneq ($(GREP),)
482   XML_full_en_US = $(foreach dir,$(MOD_SUBDIRS),$(shell $(GREP) -l "language=\"en_US\"" $(dir)/*.c $(dir)/*.cc 2>/dev/null))
483 endif
484
485 doc/full-en_US.xml: makeopts .lastclean $(XML_full_en_US)
486 ifeq ($(PYTHON),:)
487         @echo "--------------------------------------------------------------------------"
488         @echo "---        Please install python to build full documentation           ---"
489         @echo "--------------------------------------------------------------------------"
490 else
491         @printf "Building Documentation For: "
492         @echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $@
493         @echo "<!DOCTYPE docs SYSTEM \"appdocsxml.dtd\">" >> $@
494         @echo "<?xml-stylesheet type=\"text/xsl\" href=\"snapshots.xslt\"?>" > $@
495         @echo "<docs xmlns:xi=\"http://www.w3.org/2001/XInclude\">" >> $@
496         @for x in $(MOD_SUBDIRS); do \
497                 printf "$$x " ; \
498                 for i in $$x/*.c; do \
499                         $(PYTHON) build_tools/get_documentation.py < $$i >> $@ ; \
500                 done ; \
501         done
502         @echo
503         @echo "</docs>" >> $@
504         @$(PYTHON) build_tools/post_process_documentation.py -i $@ -o "doc/core-en_US.xml"
505 endif
506
507 validate-docs: doc/core-en_US.xml
508 ifeq ($(XMLSTARLET)$(XMLLINT),::)
509         @echo "--------------------------------------------------------------------------"
510         @echo "--- Please install xmllint or xmlstarlet to validate the documentation ---"
511         @echo "--------------------------------------------------------------------------"
512 else
513   ifneq ($(XMLLINT),:)
514         $(XMLLINT) --dtdvalid doc/appdocsxml.dtd --noout $<
515   else
516         $(XMLSTARLET) val -d doc/appdocsxml.dtd $<
517   endif
518 endif
519
520 update:
521         @if [ -d .svn ]; then \
522                 echo "Updating from Subversion..." ; \
523                 fromrev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
524                 svn update | tee update.out; \
525                 torev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
526                 echo "`date`  Updated from revision $${fromrev} to $${torev}." >> update.log; \
527                 rm -f .version; \
528                 if [ `grep -c ^C update.out` -gt 0 ]; then \
529                         echo ; echo "The following files have conflicts:" ; \
530                         grep ^C update.out | cut -b4- ; \
531                 fi ; \
532                 rm -f update.out; \
533         else \
534                 echo "Not under version control";  \
535         fi
536
537 NEWHEADERS=$(notdir $(wildcard include/asterisk/*.h))
538 OLDHEADERS=$(filter-out $(NEWHEADERS) $(notdir $(DESTDIR)$(ASTHEADERDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTHEADERDIR)/*.h)))
539 INSTALLDIRS="$(ASTLIBDIR)" "$(ASTMODDIR)" "$(ASTSBINDIR)" "$(ASTETCDIR)" "$(ASTVARRUNDIR)" \
540         "$(ASTSPOOLDIR)" "$(ASTSPOOLDIR)/dictate" "$(ASTSPOOLDIR)/meetme" \
541         "$(ASTSPOOLDIR)/monitor" "$(ASTSPOOLDIR)/system" "$(ASTSPOOLDIR)/tmp" \
542         "$(ASTSPOOLDIR)/voicemail" "$(ASTSPOOLDIR)/recording" \
543         "$(ASTHEADERDIR)" "$(ASTHEADERDIR)/doxygen" \
544         "$(ASTLOGDIR)" "$(ASTLOGDIR)/cdr-csv" "$(ASTLOGDIR)/cdr-custom" \
545         "$(ASTLOGDIR)/cel-custom" "$(ASTDATADIR)" "$(ASTDATADIR)/documentation" \
546         "$(ASTDATADIR)/documentation/thirdparty" "$(ASTDATADIR)/firmware" \
547         "$(ASTDATADIR)/firmware/iax" "$(ASTDATADIR)/images" "$(ASTDATADIR)/keys" \
548         "$(ASTDATADIR)/phoneprov" "$(ASTDATADIR)/rest-api" "$(ASTDATADIR)/static-http" \
549         "$(ASTDATADIR)/sounds" "$(ASTDATADIR)/moh" "$(ASTMANDIR)/man8" "$(AGI_DIR)" "$(ASTDBDIR)"
550
551 installdirs:
552         @for i in $(INSTALLDIRS); do \
553                 if [ ! -z "$${i}" -a ! -d "$(DESTDIR)$${i}" ]; then \
554                         $(INSTALL) -d "$(DESTDIR)$${i}"; \
555                 fi; \
556         done
557
558 main-bininstall:
559         +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTLIBDIR="$(ASTLIBDIR)" $(SUBMAKE) -C main bininstall
560
561 bininstall: _all installdirs $(SUBDIRS_INSTALL) main-bininstall
562         $(INSTALL) -m 755 contrib/scripts/astgenkey "$(DESTDIR)$(ASTSBINDIR)/"
563         $(INSTALL) -m 755 contrib/scripts/autosupport "$(DESTDIR)$(ASTSBINDIR)/"
564         if [ ! -f /sbin/launchd ]; then \
565                 cat contrib/scripts/safe_asterisk | sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;s|__ASTERISK_LOG_DIR__|$(ASTLOGDIR)|;s|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;' > contrib/scripts/safe.tmp ; \
566                 $(INSTALL) -m 755 contrib/scripts/safe.tmp "$(DESTDIR)$(ASTSBINDIR)/safe_asterisk" ; \
567                 rm -f contrib/scripts/safe.tmp ; \
568         fi
569         $(INSTALL) -m 644 include/asterisk.h "$(DESTDIR)$(includedir)"
570         $(INSTALL) -m 644 include/asterisk/*.h "$(DESTDIR)$(ASTHEADERDIR)"
571         $(INSTALL) -m 644 include/asterisk/doxygen/*.h "$(DESTDIR)$(ASTHEADERDIR)/doxygen"
572         if [ -n "$(OLDHEADERS)" ]; then \
573                 for h in $(OLDHEADERS); do rm -f "$(DESTDIR)$(ASTHEADERDIR)/$$h"; done \
574         fi
575
576         $(INSTALL) -m 644 doc/core-*.xml "$(DESTDIR)$(ASTDATADIR)/documentation"
577         $(INSTALL) -m 644 doc/snapshots.xslt "$(DESTDIR)$(ASTDATADIR)/documentation"
578         $(INSTALL) -m 644 doc/appdocsxml.dtd "$(DESTDIR)$(ASTDATADIR)/documentation"
579         $(INSTALL) -m 644 doc/asterisk.8 "$(DESTDIR)$(ASTMANDIR)/man8"
580         $(INSTALL) -m 644 contrib/scripts/astgenkey.8 "$(DESTDIR)$(ASTMANDIR)/man8"
581         $(INSTALL) -m 644 contrib/scripts/autosupport.8 "$(DESTDIR)$(ASTMANDIR)/man8"
582         $(INSTALL) -m 644 contrib/scripts/safe_asterisk.8 "$(DESTDIR)$(ASTMANDIR)/man8"
583         if [ -f contrib/firmware/iax/iaxy.bin ] ; then \
584                 $(INSTALL) -m 644 contrib/firmware/iax/iaxy.bin "$(DESTDIR)$(ASTDATADIR)/firmware/iax/iaxy.bin"; \
585         fi
586
587 $(SUBDIRS_INSTALL):
588         +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" $(SUBMAKE) -C $(@:-install=) install
589
590 NEWMODS:=$(foreach d,$(MOD_SUBDIRS),$(notdir $(wildcard $(d)/*.so)))
591 OLDMODS=$(filter-out $(NEWMODS) $(notdir $(DESTDIR)$(ASTMODDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTMODDIR)/*.so)))
592
593 oldmodcheck:
594         @if [ -n "$(OLDMODS)" ]; then \
595                 echo " WARNING WARNING WARNING" ;\
596                 echo "" ;\
597                 echo " Your Asterisk modules directory, located at" ;\
598                 echo " $(DESTDIR)$(ASTMODDIR)" ;\
599                 echo " contains modules that were not installed by this " ;\
600                 echo " version of Asterisk. Please ensure that these" ;\
601                 echo " modules are compatible with this version before" ;\
602                 echo " attempting to run Asterisk." ;\
603                 echo "" ;\
604                 for f in $(OLDMODS); do \
605                         echo "    $$f" ;\
606                 done ;\
607                 echo "" ;\
608                 echo " WARNING WARNING WARNING" ;\
609         fi
610
611 badshell:
612 ifneq ($(findstring ~,$(DESTDIR)),)
613         @echo "Your shell doesn't do ~ expansion when expected (specifically, when doing \"make install DESTDIR=~/path\")."
614         @echo "Try replacing ~ with \$$HOME, as in \"make install DESTDIR=\$$HOME/path\"."
615         @exit 1
616 endif
617
618 install: badshell bininstall datafiles
619         @if [ -x /usr/sbin/asterisk-post-install ]; then \
620                 /usr/sbin/asterisk-post-install "$(DESTDIR)" . ; \
621         fi
622         @echo " +---- Asterisk Installation Complete -------+"
623         @echo " +                                           +"
624         @echo " +    YOU MUST READ THE SECURITY DOCUMENT    +"
625         @echo " +                                           +"
626         @echo " + Asterisk has successfully been installed. +"
627         @echo " + If you would like to install the sample   +"
628         @echo " + configuration files (overwriting any      +"
629         @echo " + existing config files), run:              +"
630         @echo " +                                           +"
631         @echo " +               $(mK) samples               +"
632         @echo " +                                           +"
633         @echo " +-----------------  or ---------------------+"
634         @echo " +                                           +"
635         @echo " + You can go ahead and install the asterisk +"
636         @echo " + program documentation now or later run:   +"
637         @echo " +                                           +"
638         @echo " +              $(mK) progdocs               +"
639         @echo " +                                           +"
640         @echo " + **Note** This requires that you have      +"
641         @echo " + doxygen installed on your local system    +"
642         @echo " +-------------------------------------------+"
643         @$(MAKE) -s oldmodcheck
644
645 isntall: install
646
647 upgrade: bininstall
648
649 # XXX why *.adsi is installed first ?
650 adsi:
651         @echo Installing adsi config files...
652         $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)"
653         @for x in configs/*.adsi; do \
654                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
655                 if [ -f "$${dst}" ] ; then \
656                         echo "Overwriting $$x" ; \
657                 else \
658                         echo "Installing $$x" ; \
659                 fi ; \
660                 $(INSTALL) -m 644 "$$x" "$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
661         done
662
663 samples: adsi
664         @echo Installing other config files...
665         @for x in configs/*.sample; do \
666                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x .sample`" ;        \
667                 if [ -f "$${dst}" ]; then \
668                         if [ "$(OVERWRITE)" = "y" ]; then \
669                                 if cmp -s "$${dst}" "$$x" ; then \
670                                         echo "Config file $$x is unchanged"; \
671                                         continue; \
672                                 fi ; \
673                                 mv -f "$${dst}" "$${dst}.old" ; \
674                         else \
675                                 echo "Skipping config file $$x"; \
676                                 continue; \
677                         fi ;\
678                 fi ; \
679                 echo "Installing file $$x"; \
680                 $(INSTALL) -m 644 "$$x" "$${dst}" ;\
681         done
682         if [ "$(OVERWRITE)" = "y" ]; then \
683                 echo "Updating asterisk.conf" ; \
684                 sed -e 's|^astetcdir.*$$|astetcdir => $(ASTETCDIR)|' \
685                         -e 's|^astmoddir.*$$|astmoddir => $(ASTMODDIR)|' \
686                         -e 's|^astvarlibdir.*$$|astvarlibdir => $(ASTVARLIBDIR)|' \
687                         -e 's|^astdbdir.*$$|astdbdir => $(ASTDBDIR)|' \
688                         -e 's|^astkeydir.*$$|astkeydir => $(ASTKEYDIR)|' \
689                         -e 's|^astdatadir.*$$|astdatadir => $(ASTDATADIR)|' \
690                         -e 's|^astagidir.*$$|astagidir => $(AGI_DIR)|' \
691                         -e 's|^astspooldir.*$$|astspooldir => $(ASTSPOOLDIR)|' \
692                         -e 's|^astrundir.*$$|astrundir => $(ASTVARRUNDIR)|' \
693                         -e 's|^astlogdir.*$$|astlogdir => $(ASTLOGDIR)|' \
694                         -e 's|^astsbindir.*$$|astsbindir => $(ASTSBINDIR)|' \
695                         "$(DESTDIR)$(ASTCONFPATH)" > "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
696                 $(INSTALL) -m 644 "$(DESTDIR)$(ASTCONFPATH).tmp" "$(DESTDIR)$(ASTCONFPATH)" ; \
697                 rm -f "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
698         fi ; \
699         $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX"
700         build_tools/make_sample_voicemail "$(DESTDIR)/$(ASTDATADIR)" "$(DESTDIR)/$(ASTSPOOLDIR)"
701
702         @for x in phoneprov/*; do \
703                 dst="$(DESTDIR)$(ASTDATADIR)/$$x" ;     \
704                 if [ -f "$${dst}" ]; then \
705                         if [ "$(OVERWRITE)" = "y" ]; then \
706                                 if cmp -s "$${dst}" "$$x" ; then \
707                                         echo "Config file $$x is unchanged"; \
708                                         continue; \
709                                 fi ; \
710                                 mv -f "$${dst}" "$${dst}.old" ; \
711                         else \
712                                 echo "Skipping config file $$x"; \
713                                 continue; \
714                         fi ;\
715                 fi ; \
716                 echo "Installing file $$x"; \
717                 $(INSTALL) -m 644 "$$x" "$${dst}" ;\
718         done
719
720 webvmail:
721         @[ -d "$(DESTDIR)$(HTTP_DOCSDIR)/" ] || ( printf "http docs directory not found.\nUpdate assignment of variable HTTP_DOCSDIR in Makefile!\n" && exit 1 )
722         @[ -d "$(DESTDIR)$(HTTP_CGIDIR)" ] || ( printf "cgi-bin directory not found.\nUpdate assignment of variable HTTP_CGIDIR in Makefile!\n" && exit 1 )
723         $(INSTALL) -m 4755 contrib/scripts/vmail.cgi "$(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi"
724         $(INSTALL) -d "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk"
725         for x in images/*.gif; do \
726                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/"; \
727         done
728         @echo " +--------- Asterisk Web Voicemail ----------+"
729         @echo " +                                           +"
730         @echo " + Asterisk Web Voicemail is installed in    +"
731         @echo " + your cgi-bin directory:                   +"
732         @echo " + $(DESTDIR)$(HTTP_CGIDIR)"
733         @echo " + IT USES A SETUID ROOT PERL SCRIPT, SO     +"
734         @echo " + IF YOU DON'T LIKE THAT, UNINSTALL IT!     +"
735         @echo " +                                           +"
736         @echo " + Other static items have been stored in:   +"
737         @echo " + $(DESTDIR)$(HTTP_DOCSDIR)"
738         @echo " +                                           +"
739         @echo " + If these paths do not match your httpd    +"
740         @echo " + installation, correct the definitions     +"
741         @echo " + in your Makefile of HTTP_CGIDIR and       +"
742         @echo " + HTTP_DOCSDIR                              +"
743         @echo " +                                           +"
744         @echo " +-------------------------------------------+"
745
746 progdocs:
747         # Note, Makefile conditionals must not be tabbed out. Wasted hours with that.
748 ifeq ($(DOXYGEN),:)
749         @echo "Doxygen is not installed.  Please install and re-run the configuration script."
750 else
751 ifeq ($(DOT),:)
752         @echo "DOT is not installed. Doxygen will not produce any diagrams. Please install and re-run the configuration script."
753 else
754         # Enable DOT
755         @echo "HAVE_DOT = YES" >> contrib/asterisk-ng-doxygen
756 endif
757         # Set Doxygen PROJECT_NUMBER variable
758 ifneq ($(ASTERISKVERSION),UNKNOWN__and_probably_unsupported)
759         @echo "PROJECT_NUMBER = $(ASTERISKVERSION)" >> contrib/asterisk-ng-doxygen
760 else
761         echo "Asterisk Version is unknown, not configuring Doxygen PROJECT_NUMBER."
762 endif
763         # Validate Doxygen Configuration
764         @doxygen -u contrib/asterisk-ng-doxygen
765         # Run Doxygen
766         @doxygen contrib/asterisk-ng-doxygen
767         # Remove configuration backup file
768         @rm -f contrib/asterisk-ng-doxygen.bak
769 endif
770
771 install-logrotate:
772         if [ ! -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ]; then \
773                 $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ; \
774         fi
775         sed 's#__LOGDIR__#$(ASTLOGDIR)#g' < contrib/scripts/asterisk.logrotate | sed 's#__SBINDIR__#$(ASTSBINDIR)#g' > contrib/scripts/asterisk.logrotate.tmp
776         $(INSTALL) -m 0644 contrib/scripts/asterisk.logrotate.tmp "$(DESTDIR)$(ASTETCDIR)/../logrotate.d/asterisk"
777         rm -f contrib/scripts/asterisk.logrotate.tmp
778
779 config:
780         @if [ "${OSARCH}" = "linux-gnu" ]; then \
781                 if [ -f /etc/redhat-release -o -f /etc/fedora-release ]; then \
782                         cat contrib/init.d/rc.redhat.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
783                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/init.d/asterisk" ; \
784                         rm -f contrib/init.d/rc.asterisk.tmp ; \
785                         if [ ! -f "$(DESTDIR)/etc/sysconfig/asterisk" ] ; then \
786                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
787                         fi ; \
788                         if [ -z "$(DESTDIR)" ] ; then \
789                                 /sbin/chkconfig --add asterisk ; \
790                         fi ; \
791                 elif [ -f /etc/debian_version ] ; then \
792                         cat contrib/init.d/rc.debian.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
793                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ; \
794                         rm -f contrib/init.d/rc.asterisk.tmp ; \
795                         if [ ! -f "$(DESTDIR)/etc/default/asterisk" ] ; then \
796                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/default/asterisk" ; \
797                         fi ; \
798                         if [ -z "$(DESTDIR)" ] ; then \
799                                 /usr/sbin/update-rc.d asterisk defaults 50 91 ; \
800                         fi ; \
801                 elif [ -f /etc/gentoo-release ] ; then \
802                         cat contrib/init.d/rc.gentoo.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
803                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ; \
804                         rm -f contrib/init.d/rc.asterisk.tmp ; \
805                         if [ -z "$(DESTDIR)" ] ; then \
806                                 /sbin/rc-update add asterisk default ; \
807                         fi ; \
808                 elif [ -f /etc/mandrake-release -o -f /etc/mandriva-release ] ; then \
809                         cat contrib/init.d/rc.mandriva.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
810                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/init.d/asterisk" ; \
811                         rm -f contrib/init.d/rc.asterisk.tmp ; \
812                         if [ ! -f /etc/sysconfig/asterisk ] ; then \
813                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
814                         fi ; \
815                         if [ -z "$(DESTDIR)" ] ; then \
816                                 /sbin/chkconfig --add asterisk ; \
817                         fi ; \
818                 elif [ -f /etc/SuSE-release -o -f /etc/novell-release ] ; then \
819                         cat contrib/init.d/rc.suse.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
820                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ;\
821                         rm -f contrib/init.d/rc.asterisk.tmp ; \
822                         if [ ! -f /etc/sysconfig/asterisk ] ; then \
823                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
824                         fi ; \
825                         if [ -z "$(DESTDIR)" ] ; then \
826                                 /sbin/chkconfig --add asterisk ; \
827                         fi ; \
828                 elif [ -f /etc/arch-release -o -f /etc/arch-release ] ; then \
829                         cat contrib/init.d/rc.archlinux.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
830                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/asterisk" ; \
831                         rm -f contrib/init.d/rc.asterisk.tmp ; \
832                 elif [ -d "$(DESTDIR)/Library/LaunchDaemons" ]; then \
833                         if [ ! -f "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist" ]; then \
834                                 sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;' < contrib/init.d/org.asterisk.asterisk.plist > asterisk.plist ; \
835                                 $(INSTALL) -m 644 asterisk.plist "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist"; \
836                                 rm -f asterisk.plist; \
837                         fi; \
838                         if [ ! -f "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.muted.plist" ]; then \
839                                 sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;' < contrib/init.d/org.asterisk.muted.plist > muted.plist ; \
840                                 $(INSTALL) -m 644 muted.plist "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.muted.plist"; \
841                                 rm -f muted.plist; \
842                         fi; \
843                 elif [ -f /etc/slackware-version ]; then \
844                         echo "Slackware is not currently supported, although an init script does exist for it."; \
845                 else \
846                         echo "We could not install init scripts for your distribution." ; \
847                 fi \
848         else \
849                 echo "We could not install init scripts for your operating system." ; \
850         fi
851
852 sounds:
853         $(MAKE) -C sounds all
854
855 # If the cleancount has been changed, force a make clean.
856 # .cleancount is the global clean count, and .lastclean is the
857 # last clean count we had
858
859 .lastclean: .cleancount
860         @$(MAKE) clean
861         @[ -f "$(DESTDIR)$(ASTDBDIR)/astdb.sqlite3" ] || [ ! -f "$(DESTDIR)$(ASTDBDIR)/astdb" ] || [ ! -f menuselect.makeopts ] || grep -q MENUSELECT_UTILS=.*astdb2sqlite3 menuselect.makeopts || (sed -i.orig -e's/MENUSELECT_UTILS=\(.*\)/MENUSELECT_UTILS=\1 astdb2sqlite3/' menuselect.makeopts && echo "Updating menuselect.makeopts to include astdb2sqlite3" && echo "Original version backed up to menuselect.makeopts.orig")
862
863 $(SUBDIRS_UNINSTALL):
864         +@$(SUBMAKE) -C $(@:-uninstall=) uninstall
865
866 main-binuninstall:
867         +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTLIBDIR="$(ASTLIBDIR)" $(SUBMAKE) -C main binuninstall
868
869 _uninstall: $(SUBDIRS_UNINSTALL) main-binuninstall
870         rm -f "$(DESTDIR)$(ASTMODDIR)/"*
871         rm -f "$(DESTDIR)$(ASTSBINDIR)/astgenkey"
872         rm -f "$(DESTDIR)$(ASTSBINDIR)/autosupport"
873         rm -rf "$(DESTDIR)$(ASTHEADERDIR)"
874         rm -rf "$(DESTDIR)$(ASTDATADIR)/firmware"
875         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/asterisk.8"
876         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/astgenkey.8"
877         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/autosupport.8"
878         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/safe_asterisk.8"
879         $(MAKE) -C sounds uninstall
880
881 uninstall: _uninstall
882         @echo " +--------- Asterisk Uninstall Complete -----+"
883         @echo " + Asterisk binaries, sounds, man pages,     +"
884         @echo " + headers, modules, and firmware builds,    +"
885         @echo " + have all been uninstalled.                +"
886         @echo " +                                           +"
887         @echo " + To remove ALL traces of Asterisk,         +"
888         @echo " + including configuration, spool            +"
889         @echo " + directories, and logs, run the following  +"
890         @echo " + command:                                  +"
891         @echo " +                                           +"
892         @echo " +            $(mK) uninstall-all            +"
893         @echo " +-------------------------------------------+"
894
895 uninstall-all: _uninstall
896         rm -rf "$(DESTDIR)$(ASTMODDIR)"
897         rm -rf "$(DESTDIR)$(ASTVARLIBDIR)"
898         rm -rf "$(DESTDIR)$(ASTDATADIR)"
899         rm -rf "$(DESTDIR)$(ASTSPOOLDIR)"
900         rm -rf "$(DESTDIR)$(ASTETCDIR)"
901         rm -rf "$(DESTDIR)$(ASTLOGDIR)"
902
903 menuconfig: menuselect
904
905 cmenuconfig: cmenuselect
906
907 gmenuconfig: gmenuselect
908
909 nmenuconfig: nmenuselect
910
911 menuselect: menuselect/cmenuselect menuselect/nmenuselect menuselect/gmenuselect
912         @if [ -x menuselect/nmenuselect ]; then \
913                 $(MAKE) nmenuselect; \
914         elif [ -x menuselect/cmenuselect ]; then \
915                 $(MAKE) cmenuselect; \
916         elif [ -x menuselect/gmenuselect ]; then \
917                 $(MAKE) gmenuselect; \
918         else \
919                 echo "No menuselect user interface found. Install ncurses,"; \
920                 echo "newt or GTK libraries to build one and re-rerun"; \
921                 echo "'./configure' and 'make menuselect'."; \
922         fi
923
924 cmenuselect: menuselect/cmenuselect menuselect-tree menuselect.makeopts
925         -@menuselect/cmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
926
927 gmenuselect: menuselect/gmenuselect menuselect-tree menuselect.makeopts
928         -@menuselect/gmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
929
930 nmenuselect: menuselect/nmenuselect menuselect-tree menuselect.makeopts
931         -@menuselect/nmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
932
933 # options for make in menuselect/
934 MAKE_MENUSELECT=CC="$(BUILD_CC)" CXX="" LD="" AR="" RANLIB="" \
935                 CFLAGS="$(BUILD_CFLAGS)" LDFLAGS="$(BUILD_LDFLAGS)" \
936                 $(MAKE) -C menuselect CONFIGURE_SILENT="--silent"
937
938 menuselect/menuselect: menuselect/makeopts .lastclean
939         +$(MAKE_MENUSELECT) menuselect
940
941 menuselect/cmenuselect: menuselect/makeopts .lastclean
942         +$(MAKE_MENUSELECT) cmenuselect
943
944 menuselect/gmenuselect: menuselect/makeopts .lastclean
945         +$(MAKE_MENUSELECT) gmenuselect
946
947 menuselect/nmenuselect: menuselect/makeopts .lastclean
948         +$(MAKE_MENUSELECT) nmenuselect
949
950 menuselect/makeopts: makeopts .lastclean
951         +$(MAKE_MENUSELECT) makeopts
952
953 menuselect-tree: $(foreach dir,$(filter-out main,$(MOD_SUBDIRS)),$(wildcard $(dir)/*.c) $(wildcard $(dir)/*.cc)) build_tools/cflags.xml build_tools/cflags-devmode.xml sounds/sounds.xml build_tools/embed_modules.xml utils/utils.xml agi/agi.xml configure makeopts
954         @echo "Generating input for menuselect ..."
955         @echo "<?xml version=\"1.0\"?>" > $@
956         @echo >> $@
957         @echo "<menu name=\"Asterisk Module and Build Option Selection\">" >> $@
958         +@for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SILENTMAKE) -C $${dir} SUBDIR=$${dir} moduleinfo >> $@; done
959         @cat build_tools/cflags.xml >> $@
960         +@for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SILENTMAKE) -C $${dir} SUBDIR=$${dir} makeopts >> $@; done
961         @if [ "${AST_DEVMODE}" = "yes" ]; then \
962                 cat build_tools/cflags-devmode.xml >> $@; \
963         fi
964         @cat utils/utils.xml >> $@
965         @cat agi/agi.xml >> $@
966         @cat build_tools/embed_modules.xml >> $@
967         @cat sounds/sounds.xml >> $@
968         @echo "</menu>" >> $@
969
970 # We don't want to require Python or Pystache for every build, so this is its
971 # own target.
972 ari-stubs:
973 ifeq ($(PYTHON),:)
974         @echo "--------------------------------------------------------------------------"
975         @echo "---        Please install python to build ARI stubs            ---"
976         @echo "--------------------------------------------------------------------------"
977         @false
978 else
979         $(PYTHON) rest-api-templates/make_ari_stubs.py \
980                 rest-api/resources.json .
981 endif
982
983 .PHONY: menuselect
984 .PHONY: main
985 .PHONY: sounds
986 .PHONY: clean
987 .PHONY: dist-clean
988 .PHONY: distclean
989 .PHONY: all
990 .PHONY: _all
991 .PHONY: full
992 .PHONY: _full
993 .PHONY: prereqs
994 .PHONY: uninstall
995 .PHONY: _uninstall
996 .PHONY: uninstall-all
997 .PHONY: dont-optimize
998 .PHONY: badshell
999 .PHONY: installdirs
1000 .PHONY: validate-docs
1001 .PHONY: _clean
1002 .PHONY: ari-stubs
1003 .PHONY: $(SUBDIRS_INSTALL)
1004 .PHONY: $(SUBDIRS_DIST_CLEAN)
1005 .PHONY: $(SUBDIRS_CLEAN)
1006 .PHONY: $(SUBDIRS_UNINSTALL)
1007 .PHONY: $(SUBDIRS)
1008 .PHONY: $(MOD_SUBDIRS_EMBED_LDSCRIPT)
1009 .PHONY: $(MOD_SUBDIRS_EMBED_LDFLAGS)
1010 .PHONY: $(MOD_SUBDIRS_EMBED_LIBS)
1011
1012 FORCE:
1013