#
-# Asterisk -- A telephony toolkit for Linux.
-#
+# Asterisk -- An open source telephony toolkit.
+#
# Top level Makefile
#
# Copyright (C) 1999-2010, Digium, Inc.
# _ASTLDFLAGS - linker flags (not libraries) provided by the build system
# LIBS - additional libraries, at top-level for all links,
# on a single object just for that object
-# SOLINK - linker flags used only for creating shared objects (.so files),
-# used for all .so links
+# SOLINK - linker flags used only for creating dynamically loadable modules
+# as .so files
+# DYLINK - linker flags used only for creating shared libaries
+# (.so files on Unix-type platforms, .dylib on Darwin)
#
# Values for ASTCFLAGS and ASTLDFLAGS can be specified in the
# environment when running make, as follows:
# DESTDIR is the staging (or final) directory where files are copied
# during the install process. Define it before 'export', otherwise
# export will set it to the empty string making ?= fail.
+# Trying to run asterisk from the DESTDIR is completely unsupported
+# behavior.
# WARNING: do not put spaces or comments after the value.
DESTDIR?=$(INSTALL_PATH)
export DESTDIR
-export INSTALL_PATH # Additional prefix for the following paths
-export ASTETCDIR # Path for config files
+export INSTALL_PATH # Additional prefix for the following paths
+export ASTETCDIR # Path for config files
export ASTVARRUNDIR
-export MODULES_DIR
export ASTSPOOLDIR
export ASTVARLIBDIR
export ASTDATADIR
export ASTDBDIR
export ASTLOGDIR
export ASTLIBDIR
+export ASTMODDIR
export ASTMANDIR
export ASTHEADERDIR
export ASTSBINDIR
export ASTCONFPATH
export ASTKEYDIR
-export OSARCH # Operating system
-export PROC # Processor type
+export OSARCH # Operating system
-export NOISY_BUILD # Used in Makefile.rules
-export MENUSELECT_CFLAGS # Options selected in menuselect.
-export AST_DEVMODE # Set to "yes" for additional compiler
- # and runtime checks
+export NOISY_BUILD # Used in Makefile.rules
+export MENUSELECT_CFLAGS # Options selected in menuselect.
+export AST_DEVMODE # Set to "yes" for additional compiler
+ # and runtime checks
+export AST_DEVMODE_STRICT # Enables shadow warnings (-Wshadow)
-export SOLINK # linker flags for shared objects
-export STATIC_BUILD # Additional cflags, set to -static
- # for static builds. Probably
- # should go directly to ASTLDFLAGS
+export _SOLINK # linker flags for all shared objects
+export SOLINK # linker flags for loadable modules
+export DYLINK # linker flags for shared libraries
+export STATIC_BUILD # Additional cflags, set to -static
+ # for static builds. Probably
+ # should go directly to ASTLDFLAGS
#--- paths to various commands
export CC
export GREP
export MD5
export WGET_EXTRA_ARGS
+export LDCONFIG
+export LDCONFIG_FLAGS
+export PYTHON
# even though we could use '-include makeopts' here, use a wildcard
# lookup anyway, so that make won't try to build makeopts if it doesn't
# Asterisk.conf is located in ASTETCDIR or by using the -C flag
# when starting Asterisk
ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
-MODULES_DIR=$(ASTLIBDIR)/modules
AGI_DIR=$(ASTDATADIR)/agi-bin
# If you use Apache, you may determine by a grep 'DocumentRoot' of your httpd.conf file
# If the file .asterisk.makeopts is present in your home directory, you can
# include all of your favorite menuselect options so that every time you download
-# a new version of Asterisk, you don't have to run menuselect to set them.
+# a new version of Asterisk, you don't have to run menuselect to set them.
# The file /etc/asterisk.makeopts will also be included but can be overridden
# by the file in your home directory.
GLOBAL_MAKEOPTS=$(wildcard /etc/asterisk.makeopts)
USER_MAKEOPTS=$(wildcard ~/.asterisk.makeopts)
-MOD_SUBDIR_CFLAGS=-I$(ASTTOPDIR)/include
-OTHER_SUBDIR_CFLAGS=-I$(ASTTOPDIR)/include
+MOD_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
+OTHER_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
# Create OPTIONS variable, but probably we can assign directly to ASTCFLAGS
OPTIONS=
ifeq ($(OSARCH),linux-gnu)
- ifeq ($(PROC),x86_64)
- # You must have GCC 3.4 to use k8, otherwise use athlon
- PROC=k8
- #PROC=athlon
- endif
-
- ifeq ($(PROC),sparc64)
- #The problem with sparc is the best stuff is in newer versions of gcc (post 3.0) only.
- #This works for even old (2.96) versions of gcc and provides a small boost either way.
- #A ultrasparc cpu is really v9 but the stock debian stable 3.0 gcc doesn't support it.
- #So we go lowest common available by gcc and go a step down, still a step up from
- #the default as we now have a better instruction set to work with. - Belgarath
- PROC=ultrasparc
- OPTIONS+=$(shell if $(CC) -mtune=$(PROC) -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-mtune=$(PROC)"; fi)
- OPTIONS+=$(shell if $(CC) -mcpu=v8 -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-mcpu=v8"; fi)
- OPTIONS+=-fomit-frame-pointer
- endif
-
- ifeq ($(PROC),arm)
- # The Cirrus logic is the only heavily shipping arm processor with a real floating point unit
- ifeq ($(SUB_PROC),maverick)
- OPTIONS+=-fsigned-char -mcpu=ep9312
- else
- ifeq ($(SUB_PROC),xscale)
- OPTIONS+=-fsigned-char -mcpu=xscale
- else
- OPTIONS+=-fsigned-char
- endif
- endif
- endif
+ # flag to tell 'ldconfig' to only process specified directories
+ LDCONFIG_FLAGS=-n
endif
ifeq ($(findstring -save-temps,$(_ASTCFLAGS) $(ASTCFLAGS)),)
_ASTCFLAGS+=-Wall
endif
-_ASTCFLAGS+=-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(DEBUG)
+_ASTCFLAGS+=-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(AST_NESTED_FUNCTIONS) $(DEBUG)
+ADDL_TARGETS=
ifeq ($(AST_DEVMODE),yes)
_ASTCFLAGS+=-Werror
_ASTCFLAGS+=-Wunused
_ASTCFLAGS+=$(AST_DECLARATION_AFTER_STATEMENT)
_ASTCFLAGS+=$(AST_FORTIFY_SOURCE)
- _ASTCFLAGS+=-Wundef
+ _ASTCFLAGS+=$(AST_TRAMPOLINES)
+ _ASTCFLAGS+=-Wundef
_ASTCFLAGS+=-Wmissing-format-attribute
_ASTCFLAGS+=-Wformat=2
+ ifeq ($(AST_DEVMODE_STRICT),yes)
+ _ASTCFLAGS+=-Wshadow
+ endif
+ ADDL_TARGETS+=validate-docs
endif
ifneq ($(findstring BSD,$(OSARCH)),)
_ASTCFLAGS+=-isystem /usr/local/include
endif
-ifeq ($(findstring -march,$(_ASTCFLAGS) $(ASTCFLAGS)),)
- ifneq ($(PROC),ultrasparc)
- _ASTCFLAGS+=$(shell if $(CC) -march=$(PROC) -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-march=$(PROC)"; fi)
- endif
-endif
-
-ifeq ($(PROC),ppc)
- _ASTCFLAGS+=-fsigned-char
-endif
-
ifeq ($(OSARCH),FreeBSD)
# -V is understood by BSD Make, not by GNU make.
BSDVERSION=$(shell make -V OSVERSION -f /usr/share/mk/bsd.port.subdir.mk)
_ASTCFLAGS+=$(shell if test $(BSDVERSION) -lt 500016 ; then echo "-D_THREAD_SAFE"; fi)
+ # flag to tell 'ldconfig' to only process specified directories
+ LDCONFIG_FLAGS=-m
endif
ifeq ($(OSARCH),NetBSD)
_ASTCFLAGS+=-Wcast-align -DSOLARIS -I../include/solaris-compat -I/opt/ssl/include -I/usr/local/ssl/include -D_XPG4_2 -D__EXTENSIONS__
endif
-ASTERISKVERSION:=$(shell GREP=$(GREP) AWK=$(AWK) build_tools/make_version .)
+ASTERISKVERSION:=$(shell GREP=$(GREP) AWK=$(AWK) GIT=$(GIT) build_tools/make_version .)
ifneq ($(wildcard .version),)
ASTERISKVERSIONNUM:=$(shell $(AWK) -F. '{printf "%01d%02d%02d", $$1, $$2, $$3}' .version)
ifneq ($(findstring darwin,$(OSARCH)),)
_ASTCFLAGS+=-D__Darwin__
- SOLINK=-bundle -Xlinker -macosx_version_min -Xlinker 10.4 -Xlinker -undefined -Xlinker dynamic_lookup -force_flat_namespace
- ifeq ($(shell /usr/bin/sw_vers -productVersion | cut -c1-4),10.6)
- SOLINK+=/usr/lib/bundle1.o
+ _SOLINK=-Xlinker -macosx_version_min -Xlinker 10.4 -Xlinker -undefined -Xlinker dynamic_lookup -force_flat_namespace
+ ifeq ($(shell if test `/usr/bin/sw_vers -productVersion | cut -c4` -gt 5; then echo 6; else echo 0; fi),6)
+ _SOLINK+=/usr/lib/bundle1.o
endif
+ SOLINK=-bundle $(_SOLINK)
+ DYLINK=-Xlinker -dylib $(_SOLINK)
_ASTLDFLAGS+=-L/usr/local/lib
else
# These are used for all but Darwin
SOLINK=-shared
+ DYLINK=$(SOLINK)
ifneq ($(findstring BSD,$(OSARCH)),)
_ASTLDFLAGS+=-L/usr/local/lib
endif
ifeq ($(OSARCH),SunOS)
SOLINK=-shared -fpic -L/usr/local/ssl/lib -lrt
+ DYLINK=$(SOLINK)
endif
ifeq ($(OSARCH),OpenBSD)
SOLINK=-shared -fpic
+ DYLINK=$(SOLINK)
endif
# comment to print directories during submakes
SUBMAKE:=$(MAKE) --quiet --no-print-directory
endif
-# This is used when generating the doxygen documentation
-ifneq ($(DOT),:)
- HAVEDOT=yes
-else
- HAVEDOT=no
-endif
-
# $(MAKE) is printed in several places, and we want it to be a
# fixed size string. Define a variable whose name has also the
# same size, so we can easily align text.
mK=" make"
endif
-all: _all
- @echo " +--------- Asterisk Build Complete ---------+"
- @echo " + Asterisk has successfully been built, and +"
+all: _cleantest_all
+ @echo " +--------- Asterisk Build Complete ---------+"
+ @echo " + Asterisk has successfully been built, and +"
@echo " + can be installed by running: +"
@echo " + +"
- @echo " + $(mK) install +"
- @echo " +-------------------------------------------+"
+ @echo " + $(mK) install +"
+ @echo " +-------------------------------------------+"
+
+full: _cleantest_all_full
+ @echo " +--------- Asterisk Build Complete ---------+"
+ @echo " + Asterisk has successfully been built, and +"
+ @echo " + can be installed by running: +"
+ @echo " + +"
+ @echo " + $(mK) install +"
+ @echo " +-------------------------------------------+"
+
+
+# For parallel builds, we must call cleantest *before* running the
+# other dependencies on _all.
+_cleantest_all: cleantest
+ @$(MAKE) _all
-_all: cleantest makeopts $(SUBDIRS) doc/core-en_US.xml
+# For parallel builds, we must call cleantest *before* running the
+# other dependencies on _all.
+_cleantest_all_full: cleantest
+ @$(MAKE) _all_full
+
+_all: makeopts $(SUBDIRS) doc/core-en_US.xml $(ADDL_TARGETS)
+
+_all_full: makeopts $(SUBDIRS) doc/full-en_US.xml $(ADDL_TARGETS)
makeopts: configure
@echo "****"
- @echo "**** The configure script must be executed before running '$(MAKE)'."
+ @echo "**** The configure script must be executed before running '$(MAKE)'."
@echo "**** Please run \"./configure\"."
@echo "****"
@exit 1
+@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDFLAGS)
+@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LIBS)
-$(SUBDIRS): main/version.c include/asterisk/version.h include/asterisk/build.h include/asterisk/buildopts.h defaults.h makeopts.embed_rules
+$(SUBDIRS): main/version.c include/asterisk/build.h include/asterisk/buildopts.h defaults.h makeopts.embed_rules
ifeq ($(findstring $(OSARCH), mingw32 cygwin ),)
# Non-windows:
$(OTHER_SUBDIRS):
+@_ASTCFLAGS="$(OTHER_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
-defaults.h: makeopts
+defaults.h: makeopts build_tools/make_defaults_h
@build_tools/make_defaults_h > $@.tmp
@cmp -s $@.tmp $@ || mv $@.tmp $@
@rm -f $@.tmp
@cmp -s $@.tmp $@ || mv $@.tmp $@
@rm -f $@.tmp
-include/asterisk/version.h: FORCE
- @build_tools/make_version_h > $@.tmp
- @cmp -s $@.tmp $@ || mv $@.tmp $@
- @rm -f $@.tmp
-
include/asterisk/buildopts.h: menuselect.makeopts
@build_tools/make_buildopts_h > $@.tmp
@cmp -s $@.tmp $@ || mv $@.tmp $@
rm -f defaults.h
rm -f include/asterisk/build.h
rm -f main/version.c
- rm -f include/asterisk/version.h
+ rm -f doc/core-en_US.xml
+ rm -f doc/full-en_US.xml
@$(MAKE) -C menuselect clean
cp -f .cleancount .lastclean
rm -rf doc/api
rm -f build_tools/menuselect-deps
-datafiles: _all
- CFLAGS="$(_ASTCFLAGS) $(ASTCFLAGS)" build_tools/mkpkgconfig $(DESTDIR)$(libdir)/pkgconfig;
+datafiles: _cleantest_all doc/core-en_US.xml
+ CFLAGS="$(_ASTCFLAGS) $(ASTCFLAGS)" build_tools/mkpkgconfig "$(DESTDIR)$(libdir)/pkgconfig";
# Should static HTTP be installed during make samples or even with its own target ala
# webvoicemail? There are portions here that *could* be customized but might also be
# improved a lot. I'll put it here for now.
for x in static-http/*; do \
- $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTDATADIR)/static-http ; \
+ $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/static-http" ; \
done
+ $(INSTALL) -m 644 doc/core-en_US.xml "$(DESTDIR)$(ASTDATADIR)/static-http";
if [ -d doc/tex/asterisk ] ; then \
- $(INSTALL) -d $(DESTDIR)$(ASTDATADIR)/static-http/docs ; \
+ $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/static-http/docs" ; \
for n in doc/tex/asterisk/* ; do \
- $(INSTALL) -m 644 $$n $(DESTDIR)$(ASTDATADIR)/static-http/docs ; \
+ $(INSTALL) -m 644 $$n "$(DESTDIR)$(ASTDATADIR)/static-http/docs" ; \
done \
fi
for x in images/*.jpg; do \
- $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTDATADIR)/images ; \
+ $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/images" ; \
done
$(MAKE) -C sounds install
@echo
@echo "</docs>" >> $@
+doc/full-en_US.xml: $(foreach dir,$(MOD_SUBDIRS),$(shell $(GREP) -l "language=\"en_US\"" $(dir)/*.c $(dir)/*.cc 2>/dev/null))
+ifeq ($(PYTHON),:)
+ @echo "--------------------------------------------------------------------------"
+ @echo "--- Please install python to build full documentation ---"
+ @echo "--------------------------------------------------------------------------"
+else
+ @printf "Building Documentation For: "
+ @echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $@
+ @echo "<!DOCTYPE docs SYSTEM \"appdocsxml.dtd\">" >> $@
+ @echo "<docs xmlns:xi=\"http://www.w3.org/2001/XInclude\">" >> $@
+ @for x in $(MOD_SUBDIRS); do \
+ printf "$$x " ; \
+ for i in $$x/*.c; do \
+ $(PYTHON) build_tools/get_documentation.py < $$i >> $@ ; \
+ done ; \
+ done
+ @echo
+ @echo "</docs>" >> $@
+ @$(PYTHON) build_tools/post_process_documentation.py -i $@ -o "doc/core-en_US.xml"
+endif
+
validate-docs: doc/core-en_US.xml
ifeq ($(XMLSTARLET)$(XMLLINT),::)
@echo "--------------------------------------------------------------------------"
endif
endif
-update:
+update:
@if [ -d .svn ]; then \
echo "Updating from Subversion..." ; \
fromrev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
fi
NEWHEADERS=$(notdir $(wildcard include/asterisk/*.h))
-OLDHEADERS=$(filter-out $(NEWHEADERS),$(notdir $(wildcard $(DESTDIR)$(ASTHEADERDIR)/*.h)))
+OLDHEADERS=$(filter-out $(NEWHEADERS) $(notdir $(DESTDIR)$(ASTHEADERDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTHEADERDIR)/*.h)))
+INSTALLDIRS="$(ASTLIBDIR)" "$(ASTMODDIR)" "$(ASTSBINDIR)" "$(ASTETCDIR)" "$(ASTVARRUNDIR)" \
+ "$(ASTSPOOLDIR)" "$(ASTSPOOLDIR)/dictate" "$(ASTSPOOLDIR)/meetme" \
+ "$(ASTSPOOLDIR)/monitor" "$(ASTSPOOLDIR)/system" "$(ASTSPOOLDIR)/tmp" \
+ "$(ASTSPOOLDIR)/voicemail" "$(ASTHEADERDIR)" "$(ASTHEADERDIR)/doxygen" \
+ "$(ASTLOGDIR)" "$(ASTLOGDIR)/cdr-csv" "$(ASTLOGDIR)/cdr-custom" \
+ "$(ASTLOGDIR)/cel-custom" "$(ASTDATADIR)" "$(ASTDATADIR)/documentation" \
+ "$(ASTDATADIR)/documentation/thirdparty" "$(ASTDATADIR)/firmware" \
+ "$(ASTDATADIR)/firmware/iax" "$(ASTDATADIR)/images" "$(ASTDATADIR)/keys" \
+ "$(ASTDATADIR)/phoneprov" "$(ASTDATADIR)/static-http" "$(ASTDATADIR)/sounds" \
+ "$(ASTDATADIR)/moh" "$(ASTMANDIR)/man8" "$(AGI_DIR)" "$(ASTDBDIR)"
installdirs:
- $(INSTALL) -d "$(DESTDIR)$(MODULES_DIR)"
- $(INSTALL) -d "$(DESTDIR)$(ASTSBINDIR)"
- $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)"
- $(INSTALL) -d "$(DESTDIR)$(ASTVARRUNDIR)"
- $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)"
- $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/dictate"
- $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/meetme"
- $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/monitor"
- $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/system"
- $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/tmp"
- $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/voicemail"
- $(INSTALL) -d "$(DESTDIR)$(ASTHEADERDIR)"
- $(INSTALL) -d "$(DESTDIR)$(ASTHEADERDIR)/doxygen"
- $(INSTALL) -d "$(DESTDIR)$(ASTLOGDIR)"
- $(INSTALL) -d "$(DESTDIR)$(ASTLOGDIR)/cdr-csv"
- $(INSTALL) -d "$(DESTDIR)$(ASTLOGDIR)/cdr-custom"
- $(INSTALL) -d "$(DESTDIR)$(ASTLOGDIR)/cel-csv"
- $(INSTALL) -d "$(DESTDIR)$(ASTLOGDIR)/cel-custom"
- $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)"
- $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/documentation"
- $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/documentation/thirdparty"
- $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/firmware"
- $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/firmware/iax"
- $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/images"
- $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/keys"
- $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/phoneprov"
- $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/static-http"
- $(INSTALL) -d "$(DESTDIR)$(ASTMANDIR)/man8"
- $(INSTALL) -d "$(DESTDIR)$(AGI_DIR)"
-
-bininstall: _all installdirs $(SUBDIRS_INSTALL)
- $(INSTALL) -m 755 main/asterisk $(DESTDIR)$(ASTSBINDIR)/
- $(LN) -sf asterisk $(DESTDIR)$(ASTSBINDIR)/rasterisk
- $(INSTALL) -m 755 contrib/scripts/astgenkey $(DESTDIR)$(ASTSBINDIR)/
- $(INSTALL) -m 755 contrib/scripts/autosupport $(DESTDIR)$(ASTSBINDIR)/
- if [ ! -f $(DESTDIR)$(ASTSBINDIR)/safe_asterisk -a ! -f /sbin/launchd ]; then \
- cat contrib/scripts/safe_asterisk | sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/scripts/safe.tmp ; \
- $(INSTALL) -m 755 contrib/scripts/safe.tmp $(DESTDIR)$(ASTSBINDIR)/safe_asterisk ; \
+ @for i in $(INSTALLDIRS); do \
+ if [ ! -z "$${i}" -a ! -d "$(DESTDIR)$${i}" ]; then \
+ $(INSTALL) -d "$(DESTDIR)$${i}"; \
+ fi; \
+ done
+
+main-bininstall:
+ +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTLIBDIR="$(ASTLIBDIR)" $(SUBMAKE) -C main bininstall
+
+bininstall: _cleantest_all installdirs $(SUBDIRS_INSTALL) main-bininstall
+ $(INSTALL) -m 755 contrib/scripts/astgenkey "$(DESTDIR)$(ASTSBINDIR)/"
+ $(INSTALL) -m 755 contrib/scripts/autosupport "$(DESTDIR)$(ASTSBINDIR)/"
+ if [ ! -f "$(DESTDIR)$(ASTSBINDIR)/safe_asterisk" -a ! -f /sbin/launchd ]; then \
+ cat contrib/scripts/safe_asterisk | sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;s|__ASTERISK_LOG_DIR__|$(ASTLOGDIR)|;' > contrib/scripts/safe.tmp ; \
+ $(INSTALL) -m 755 contrib/scripts/safe.tmp "$(DESTDIR)$(ASTSBINDIR)/safe_asterisk" ; \
rm -f contrib/scripts/safe.tmp ; \
fi
- $(INSTALL) -m 644 include/asterisk.h $(DESTDIR)$(includedir)
- $(INSTALL) -m 644 include/asterisk/*.h $(DESTDIR)$(ASTHEADERDIR)
- $(INSTALL) -m 644 include/asterisk/doxygen/*.h $(DESTDIR)$(ASTHEADERDIR)/doxygen
+ $(INSTALL) -m 644 include/asterisk.h "$(DESTDIR)$(includedir)"
+ $(INSTALL) -m 644 include/asterisk/*.h "$(DESTDIR)$(ASTHEADERDIR)"
+ $(INSTALL) -m 644 include/asterisk/doxygen/*.h "$(DESTDIR)$(ASTHEADERDIR)/doxygen"
if [ -n "$(OLDHEADERS)" ]; then \
- rm -f $(addprefix $(DESTDIR)$(ASTHEADERDIR)/,$(OLDHEADERS)) ;\
+ for h in $(OLDHEADERS); do rm -f "$(DESTDIR)$(ASTHEADERDIR)/$$h"; done \
fi
- $(INSTALL) -m 644 doc/core-*.xml $(DESTDIR)$(ASTDATADIR)/documentation
- $(INSTALL) -m 644 doc/appdocsxml.dtd $(DESTDIR)$(ASTDATADIR)/documentation
- $(INSTALL) -m 644 doc/asterisk.8 $(DESTDIR)$(ASTMANDIR)/man8
- $(INSTALL) -m 644 contrib/scripts/astgenkey.8 $(DESTDIR)$(ASTMANDIR)/man8
- $(INSTALL) -m 644 contrib/scripts/autosupport.8 $(DESTDIR)$(ASTMANDIR)/man8
- $(INSTALL) -m 644 contrib/scripts/safe_asterisk.8 $(DESTDIR)$(ASTMANDIR)/man8
+ $(INSTALL) -m 644 doc/core-*.xml "$(DESTDIR)$(ASTDATADIR)/documentation"
+ $(INSTALL) -m 644 doc/appdocsxml.dtd "$(DESTDIR)$(ASTDATADIR)/documentation"
+ $(INSTALL) -m 644 doc/asterisk.8 "$(DESTDIR)$(ASTMANDIR)/man8"
+ $(INSTALL) -m 644 contrib/scripts/astgenkey.8 "$(DESTDIR)$(ASTMANDIR)/man8"
+ $(INSTALL) -m 644 contrib/scripts/autosupport.8 "$(DESTDIR)$(ASTMANDIR)/man8"
+ $(INSTALL) -m 644 contrib/scripts/safe_asterisk.8 "$(DESTDIR)$(ASTMANDIR)/man8"
if [ -f contrib/firmware/iax/iaxy.bin ] ; then \
- $(INSTALL) -m 644 contrib/firmware/iax/iaxy.bin $(DESTDIR)$(ASTDATADIR)/firmware/iax/iaxy.bin; \
+ $(INSTALL) -m 644 contrib/firmware/iax/iaxy.bin "$(DESTDIR)$(ASTDATADIR)/firmware/iax/iaxy.bin"; \
fi
$(SUBDIRS_INSTALL):
- +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" $(SUBMAKE) -C $(@:-install=) install
+ +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" $(SUBMAKE) -C $(@:-install=) install
NEWMODS:=$(foreach d,$(MOD_SUBDIRS),$(notdir $(wildcard $(d)/*.so)))
-OLDMODS=$(filter-out $(NEWMODS),$(notdir $(wildcard $(DESTDIR)$(MODULES_DIR)/*.so)))
+OLDMODS=$(filter-out $(NEWMODS) $(notdir $(DESTDIR)$(ASTMODDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTMODDIR)/*.so)))
oldmodcheck:
@if [ -n "$(OLDMODS)" ]; then \
echo " WARNING WARNING WARNING" ;\
echo "" ;\
echo " Your Asterisk modules directory, located at" ;\
- echo " $(DESTDIR)$(MODULES_DIR)" ;\
+ echo " $(DESTDIR)$(ASTMODDIR)" ;\
echo " contains modules that were not installed by this " ;\
echo " version of Asterisk. Please ensure that these" ;\
echo " modules are compatible with this version before" ;\
install: badshell bininstall datafiles
@if [ -x /usr/sbin/asterisk-post-install ]; then \
- /usr/sbin/asterisk-post-install $(DESTDIR) . ; \
+ /usr/sbin/asterisk-post-install "$(DESTDIR)" . ; \
fi
- @echo " +---- Asterisk Installation Complete -------+"
+ @echo " +---- Asterisk Installation Complete -------+"
@echo " + +"
@echo " + YOU MUST READ THE SECURITY DOCUMENT +"
@echo " + +"
- @echo " + Asterisk has successfully been installed. +"
- @echo " + If you would like to install the sample +"
+ @echo " + Asterisk has successfully been installed. +"
+ @echo " + If you would like to install the sample +"
@echo " + configuration files (overwriting any +"
- @echo " + existing config files), run: +"
+ @echo " + existing config files), run: +"
@echo " + +"
@echo " + $(mK) samples +"
@echo " + +"
# XXX why *.adsi is installed first ?
adsi:
@echo Installing adsi config files...
- $(INSTALL) -d $(DESTDIR)$(ASTETCDIR)
+ $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)"
@for x in configs/*.adsi; do \
dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
- if [ -f $${dst} ] ; then \
+ if [ -f "$${dst}" ] ; then \
echo "Overwriting $$x" ; \
else \
echo "Installing $$x" ; \
fi ; \
- $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x` ; \
+ $(INSTALL) -m 644 "$$x" "$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
done
samples: adsi
@echo Installing other config files...
@for x in configs/*.sample; do \
dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x .sample`" ; \
- if [ -f $${dst} ]; then \
+ if [ -f "$${dst}" ]; then \
if [ "$(OVERWRITE)" = "y" ]; then \
- if cmp -s $${dst} $$x ; then \
+ if cmp -s "$${dst}" "$$x" ; then \
echo "Config file $$x is unchanged"; \
continue; \
fi ; \
- mv -f $${dst} $${dst}.old ; \
+ mv -f "$${dst}" "$${dst}.old" ; \
else \
echo "Skipping config file $$x"; \
continue; \
fi ;\
fi ; \
echo "Installing file $$x"; \
- $(INSTALL) -m 644 $$x $${dst} ;\
+ $(INSTALL) -m 644 "$$x" "$${dst}" ;\
done
if [ "$(OVERWRITE)" = "y" ]; then \
echo "Updating asterisk.conf" ; \
sed -e 's|^astetcdir.*$$|astetcdir => $(ASTETCDIR)|' \
- -e 's|^astmoddir.*$$|astmoddir => $(MODULES_DIR)|' \
+ -e 's|^astmoddir.*$$|astmoddir => $(ASTMODDIR)|' \
-e 's|^astvarlibdir.*$$|astvarlibdir => $(ASTVARLIBDIR)|' \
-e 's|^astdbdir.*$$|astdbdir => $(ASTDBDIR)|' \
-e 's|^astkeydir.*$$|astkeydir => $(ASTKEYDIR)|' \
-e 's|^astspooldir.*$$|astspooldir => $(ASTSPOOLDIR)|' \
-e 's|^astrundir.*$$|astrundir => $(ASTVARRUNDIR)|' \
-e 's|^astlogdir.*$$|astlogdir => $(ASTLOGDIR)|' \
- $(DESTDIR)$(ASTCONFPATH) > $(DESTDIR)$(ASTCONFPATH).tmp ; \
- $(INSTALL) -m 644 $(DESTDIR)$(ASTCONFPATH).tmp $(DESTDIR)$(ASTCONFPATH) ; \
- rm -f $(DESTDIR)$(ASTCONFPATH).tmp ; \
+ -e 's|^astsbindir.*$$|astsbindir => $(ASTSBINDIR)|' \
+ "$(DESTDIR)$(ASTCONFPATH)" > "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
+ $(INSTALL) -m 644 "$(DESTDIR)$(ASTCONFPATH).tmp" "$(DESTDIR)$(ASTCONFPATH)" ; \
+ rm -f "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
fi ; \
- $(INSTALL) -d $(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX
- build_tools/make_sample_voicemail $(DESTDIR)/$(ASTDATADIR) $(DESTDIR)/$(ASTSPOOLDIR)
+ $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX"
+ build_tools/make_sample_voicemail "$(DESTDIR)/$(ASTDATADIR)" "$(DESTDIR)/$(ASTSPOOLDIR)"
@for x in phoneprov/*; do \
dst="$(DESTDIR)$(ASTDATADIR)/$$x" ; \
- if [ -f $${dst} ]; then \
+ if [ -f "$${dst}" ]; then \
if [ "$(OVERWRITE)" = "y" ]; then \
- if cmp -s $${dst} $$x ; then \
+ if cmp -s "$${dst}" "$$x" ; then \
echo "Config file $$x is unchanged"; \
continue; \
fi ; \
- mv -f $${dst} $${dst}.old ; \
+ mv -f "$${dst}" "$${dst}.old" ; \
else \
echo "Skipping config file $$x"; \
continue; \
fi ;\
fi ; \
echo "Installing file $$x"; \
- $(INSTALL) -m 644 $$x $${dst} ;\
+ $(INSTALL) -m 644 "$$x" "$${dst}" ;\
done
webvmail:
- @[ -d $(DESTDIR)$(HTTP_DOCSDIR)/ ] || ( printf "http docs directory not found.\nUpdate assignment of variable HTTP_DOCSDIR in Makefile!\n" && exit 1 )
- @[ -d $(DESTDIR)$(HTTP_CGIDIR) ] || ( printf "cgi-bin directory not found.\nUpdate assignment of variable HTTP_CGIDIR in Makefile!\n" && exit 1 )
- $(INSTALL) -m 4755 contrib/scripts/vmail.cgi $(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi
- $(INSTALL) -d $(DESTDIR)$(HTTP_DOCSDIR)/_asterisk
+ @[ -d "$(DESTDIR)$(HTTP_DOCSDIR)/" ] || ( printf "http docs directory not found.\nUpdate assignment of variable HTTP_DOCSDIR in Makefile!\n" && exit 1 )
+ @[ -d "$(DESTDIR)$(HTTP_CGIDIR)" ] || ( printf "cgi-bin directory not found.\nUpdate assignment of variable HTTP_CGIDIR in Makefile!\n" && exit 1 )
+ $(INSTALL) -m 4755 contrib/scripts/vmail.cgi "$(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi"
+ $(INSTALL) -d "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk"
for x in images/*.gif; do \
- $(INSTALL) -m 644 $$x $(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/; \
+ $(INSTALL) -m 644 $$x "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/"; \
done
- @echo " +--------- Asterisk Web Voicemail ----------+"
+ @echo " +--------- Asterisk Web Voicemail ----------+"
@echo " + +"
@echo " + Asterisk Web Voicemail is installed in +"
@echo " + your cgi-bin directory: +"
@echo " + in your Makefile of HTTP_CGIDIR and +"
@echo " + HTTP_DOCSDIR +"
@echo " + +"
- @echo " +-------------------------------------------+"
+ @echo " +-------------------------------------------+"
progdocs:
- (cat contrib/asterisk-ng-doxygen; echo "HAVE_DOT=$(HAVEDOT)"; \
- echo "PROJECT_NUMBER=$(ASTERISKVERSION)") | doxygen -
+ # Note, Makefile conditionals must not be tabbed out. Wasted hours with that.
+ifeq ($(DOXYGEN),:)
+ @echo "Doxygen is not installed. Please install and re-run the configuration script."
+else
+ifeq ($(DOT),:)
+ @echo "DOT is not installed. Doxygen will not produce any diagrams. Please install and re-run the configuration script."
+else
+ # Enable DOT
+ @echo "HAVE_DOT = YES" >> contrib/asterisk-ng-doxygen
+endif
+ # Set Doxygen PROJECT_NUMBER variable
+ifneq ($(ASTERISKVERSION),UNKNOWN__and_probably_unsupported)
+ @echo "PROJECT_NUMBER = $(ASTERISKVERSION)" >> contrib/asterisk-ng-doxygen
+else
+ echo "Asterisk Version is unknown, not configuring Doxygen PROJECT_NUMBER."
+endif
+ # Validate Doxygen Configuration
+ @doxygen -u contrib/asterisk-ng-doxygen
+ # Run Doxygen
+ @doxygen contrib/asterisk-ng-doxygen
+ # Remove configuration backup file
+ @rm -f contrib/asterisk-ng-doxygen.bak
+endif
install-logrotate:
- if [ ! -d $(ASTETCDIR)/../logrotate.d ]; then \
- $(INSTALL) -d $(ASTETCDIR)/../logrotate.d ; \
+ if [ ! -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ]; then \
+ $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ; \
fi
sed 's#__LOGDIR__#$(ASTLOGDIR)#g' < contrib/scripts/asterisk.logrotate | sed 's#__SBINDIR__#$(ASTSBINDIR)#g' > contrib/scripts/asterisk.logrotate.tmp
- $(INSTALL) -m 0644 contrib/scripts/asterisk.logrotate.tmp $(ASTETCDIR)/../logrotate.d/asterisk
+ $(INSTALL) -m 0644 contrib/scripts/asterisk.logrotate.tmp "$(DESTDIR)$(ASTETCDIR)/../logrotate.d/asterisk"
rm -f contrib/scripts/asterisk.logrotate.tmp
config:
@if [ "${OSARCH}" = "linux-gnu" ]; then \
if [ -f /etc/redhat-release -o -f /etc/fedora-release ]; then \
cat contrib/init.d/rc.redhat.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
- $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp $(DESTDIR)/etc/rc.d/init.d/asterisk ; \
+ $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/init.d/asterisk" ; \
rm -f contrib/init.d/rc.asterisk.tmp ; \
- if [ ! -f $(DESTDIR)/etc/sysconfig/asterisk ] ; then \
- $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk $(DESTDIR)/etc/sysconfig/asterisk ; \
+ if [ ! -f "$(DESTDIR)/etc/sysconfig/asterisk" ] ; then \
+ $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
fi ; \
if [ -z "$(DESTDIR)" ] ; then \
/sbin/chkconfig --add asterisk ; \
fi ; \
elif [ -f /etc/debian_version ] ; then \
cat contrib/init.d/rc.debian.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
- $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp $(DESTDIR)/etc/init.d/asterisk ; \
+ $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ; \
rm -f contrib/init.d/rc.asterisk.tmp ; \
- if [ ! -f $(DESTDIR)/etc/default/asterisk ] ; then \
- $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk $(DESTDIR)/etc/default/asterisk ; \
+ if [ ! -f "$(DESTDIR)/etc/default/asterisk" ] ; then \
+ $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/default/asterisk" ; \
fi ; \
if [ -z "$(DESTDIR)" ] ; then \
/usr/sbin/update-rc.d asterisk defaults 50 91 ; \
fi ; \
elif [ -f /etc/gentoo-release ] ; then \
cat contrib/init.d/rc.gentoo.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
- $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp $(DESTDIR)/etc/init.d/asterisk ; \
+ $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ; \
rm -f contrib/init.d/rc.asterisk.tmp ; \
if [ -z "$(DESTDIR)" ] ; then \
/sbin/rc-update add asterisk default ; \
fi ; \
elif [ -f /etc/mandrake-release -o -f /etc/mandriva-release ] ; then \
cat contrib/init.d/rc.mandriva.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
- $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp $(DESTDIR)/etc/rc.d/init.d/asterisk ; \
+ $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/init.d/asterisk" ; \
rm -f contrib/init.d/rc.asterisk.tmp ; \
if [ ! -f /etc/sysconfig/asterisk ] ; then \
- $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk $(DESTDIR)/etc/sysconfig/asterisk ; \
+ $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
fi ; \
if [ -z "$(DESTDIR)" ] ; then \
/sbin/chkconfig --add asterisk ; \
fi ; \
elif [ -f /etc/SuSE-release -o -f /etc/novell-release ] ; then \
cat contrib/init.d/rc.suse.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
- $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp $(DESTDIR)/etc/init.d/asterisk ;\
+ $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ;\
rm -f contrib/init.d/rc.asterisk.tmp ; \
if [ ! -f /etc/sysconfig/asterisk ] ; then \
- $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk $(DESTDIR)/etc/sysconfig/asterisk ; \
+ $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
fi ; \
if [ -z "$(DESTDIR)" ] ; then \
/sbin/chkconfig --add asterisk ; \
fi ; \
elif [ -f /etc/arch-release -o -f /etc/arch-release ] ; then \
cat contrib/init.d/rc.archlinux.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
- $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp $(DESTDIR)/etc/rc.d/asterisk ; \
+ $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/asterisk" ; \
rm -f contrib/init.d/rc.asterisk.tmp ; \
- elif [ -d $(DESTDIR)/Library/LaunchDaemons -a ! -f $(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist ] ; then \
- $(INSTALL) -m 644 contrib/init.d/org.asterisk.asterisk.plist $(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist; \
+ elif [ -d "$(DESTDIR)/Library/LaunchDaemons" ]; then \
+ if [ ! -f "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist" ]; then \
+ sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;' < contrib/init.d/org.asterisk.asterisk.plist > asterisk.plist ; \
+ $(INSTALL) -m 644 asterisk.plist "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist"; \
+ rm -f asterisk.plist; \
+ fi; \
+ if [ ! -f "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.muted.plist" ]; then \
+ sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;' < contrib/init.d/org.asterisk.muted.plist > muted.plist ; \
+ $(INSTALL) -m 644 muted.plist "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.muted.plist"; \
+ rm -f muted.plist; \
+ fi; \
elif [ -f /etc/slackware-version ]; then \
echo "Slackware is not currently supported, although an init script does exist for it."; \
else \
$(MAKE) -C sounds all
# If the cleancount has been changed, force a make clean.
-# .cleancount is the global clean count, and .lastclean is the
+# .cleancount is the global clean count, and .lastclean is the
# last clean count we had
cleantest:
@cmp -s .cleancount .lastclean || $(MAKE) clean
+ @[ -f "$(DESTDIR)$(ASTDBDIR)/astdb.sqlite3" ] || [ ! -f "$(DESTDIR)$(ASTDBDIR)/astdb" ] || [ ! -f menuselect.makeopts ] || grep -q MENUSELECT_UTILS=.*astdb2sqlite3 menuselect.makeopts || (sed -i.orig -e's/MENUSELECT_UTILS=\(.*\)/MENUSELECT_UTILS=\1 astdb2sqlite3/' menuselect.makeopts && echo "Updating menuselect.makeopts to include astdb2sqlite3" && echo "Original version backed up to menuselect.makeopts.orig")
$(SUBDIRS_UNINSTALL):
+@$(SUBMAKE) -C $(@:-uninstall=) uninstall
-_uninstall: $(SUBDIRS_UNINSTALL)
- rm -f $(DESTDIR)$(MODULES_DIR)/*
- rm -f $(DESTDIR)$(ASTSBINDIR)/*asterisk*
- rm -f $(DESTDIR)$(ASTSBINDIR)/astgenkey
- rm -f $(DESTDIR)$(ASTSBINDIR)/autosupport
- rm -rf $(DESTDIR)$(ASTHEADERDIR)
- rm -rf $(DESTDIR)$(ASTDATADIR)/firmware
- rm -f $(DESTDIR)$(ASTMANDIR)/man8/asterisk.8
- rm -f $(DESTDIR)$(ASTMANDIR)/man8/astgenkey.8
- rm -f $(DESTDIR)$(ASTMANDIR)/man8/autosupport.8
- rm -f $(DESTDIR)$(ASTMANDIR)/man8/safe_asterisk.8
+main-binuninstall:
+ +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTLIBDIR="$(ASTLIBDIR)" $(SUBMAKE) -C main binuninstall
+
+_uninstall: $(SUBDIRS_UNINSTALL) main-binuninstall
+ rm -f "$(DESTDIR)$(ASTMODDIR)/"*
+ rm -f "$(DESTDIR)$(ASTSBINDIR)/astgenkey"
+ rm -f "$(DESTDIR)$(ASTSBINDIR)/autosupport"
+ rm -rf "$(DESTDIR)$(ASTHEADERDIR)"
+ rm -rf "$(DESTDIR)$(ASTDATADIR)/firmware"
+ rm -f "$(DESTDIR)$(ASTMANDIR)/man8/asterisk.8"
+ rm -f "$(DESTDIR)$(ASTMANDIR)/man8/astgenkey.8"
+ rm -f "$(DESTDIR)$(ASTMANDIR)/man8/autosupport.8"
+ rm -f "$(DESTDIR)$(ASTMANDIR)/man8/safe_asterisk.8"
$(MAKE) -C sounds uninstall
uninstall: _uninstall
- @echo " +--------- Asterisk Uninstall Complete -----+"
- @echo " + Asterisk binaries, sounds, man pages, +"
- @echo " + headers, modules, and firmware builds, +"
- @echo " + have all been uninstalled. +"
+ @echo " +--------- Asterisk Uninstall Complete -----+"
+ @echo " + Asterisk binaries, sounds, man pages, +"
+ @echo " + headers, modules, and firmware builds, +"
+ @echo " + have all been uninstalled. +"
@echo " + +"
@echo " + To remove ALL traces of Asterisk, +"
@echo " + including configuration, spool +"
@echo " + directories, and logs, run the following +"
@echo " + command: +"
@echo " + +"
- @echo " + $(mK) uninstall-all +"
- @echo " +-------------------------------------------+"
+ @echo " + $(mK) uninstall-all +"
+ @echo " +-------------------------------------------+"
uninstall-all: _uninstall
- rm -rf $(DESTDIR)$(ASTLIBDIR)
- rm -rf $(DESTDIR)$(ASTVARLIBDIR)
- rm -rf $(DESTDIR)$(ASTDATADIR)
- rm -rf $(DESTDIR)$(ASTSPOOLDIR)
- rm -rf $(DESTDIR)$(ASTETCDIR)
- rm -rf $(DESTDIR)$(ASTLOGDIR)
+ rm -rf "$(DESTDIR)$(ASTMODDIR)"
+ rm -rf "$(DESTDIR)$(ASTVARLIBDIR)"
+ rm -rf "$(DESTDIR)$(ASTDATADIR)"
+ rm -rf "$(DESTDIR)$(ASTSPOOLDIR)"
+ rm -rf "$(DESTDIR)$(ASTETCDIR)"
+ rm -rf "$(DESTDIR)$(ASTLOGDIR)"
menuconfig: menuselect
else \
echo "No menuselect user interface found. Install ncurses,"; \
echo "newt or GTK libraries to build one and re-rerun"; \
- echo "'make menuselect'."; \
+ echo "'./configure' and 'make menuselect'."; \
fi
cmenuselect: menuselect/cmenuselect menuselect-tree menuselect.makeopts
-@menuselect/nmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
# options for make in menuselect/
-MAKE_MENUSELECT=CC="$(BUILD_CC)" CXX="" LD="" AR="" RANLIB="" CFLAGS="" $(MAKE) -C menuselect CONFIGURE_SILENT="--silent"
+MAKE_MENUSELECT=CC="$(BUILD_CC)" CXX="" LD="" AR="" RANLIB="" \
+ CFLAGS="$(BUILD_CFLAGS)" LDFLAGS="$(BUILD_LDFLAGS)" \
+ $(MAKE) -C menuselect CONFIGURE_SILENT="--silent"
menuselect/menuselect: menuselect/makeopts
+$(MAKE_MENUSELECT) menuselect
menuselect/makeopts: makeopts
+$(MAKE_MENUSELECT) makeopts
-menuselect-tree: $(foreach dir,$(filter-out main,$(MOD_SUBDIRS)),$(wildcard $(dir)/*.c) $(wildcard $(dir)/*.cc)) build_tools/cflags.xml build_tools/cflags-devmode.xml sounds/sounds.xml build_tools/embed_modules.xml utils/utils.xml agi/agi.xml configure
+menuselect-tree: $(foreach dir,$(filter-out main,$(MOD_SUBDIRS)),$(wildcard $(dir)/*.c) $(wildcard $(dir)/*.cc)) build_tools/cflags.xml build_tools/cflags-devmode.xml sounds/sounds.xml build_tools/embed_modules.xml utils/utils.xml agi/agi.xml configure makeopts
@echo "Generating input for menuselect ..."
@echo "<?xml version=\"1.0\"?>" > $@
@echo >> $@
@cat sounds/sounds.xml >> $@
@echo "</menu>" >> $@
-pdf: asterisk.pdf
-asterisk.pdf:
- $(MAKE) -C doc/tex asterisk.pdf
-
-txt: asterisk.txt
-asterisk.txt:
- $(MAKE) -C doc/tex asterisk.txt
-
.PHONY: menuselect
.PHONY: main
.PHONY: sounds
.PHONY: dist-clean
.PHONY: distclean
.PHONY: all
+.PHONY: _all
+.PHONY: _cleantest_all
.PHONY: prereqs
.PHONY: cleantest
.PHONY: uninstall
.PHONY: _uninstall
.PHONY: uninstall-all
-.PHONY: pdf
.PHONY: dont-optimize
.PHONY: badshell
.PHONY: installdirs
projects / asterisk/asterisk.git / blobdiff