Don't unnecessarily rebuild things on every run of 'make'.
[asterisk/asterisk.git] / Makefile
1 #
2 # Asterisk -- An open source telephony toolkit.
3 #
4 # Top level Makefile
5 #
6 # Copyright (C) 1999-2010, Digium, Inc.
7 #
8 # Mark Spencer <markster@digium.com>
9 #
10 # This program is free software, distributed under the terms of
11 # the GNU General Public License
12 #
13
14 # All Makefiles use the following variables:
15 #
16 # ASTCFLAGS - compiler options provided by the user (if any)
17 # _ASTCFLAGS - compiler options provided by the build system
18 # ASTLDFLAGS - linker flags (not libraries) provided by the user (if any)
19 # _ASTLDFLAGS - linker flags (not libraries) provided by the build system
20 # LIBS - additional libraries, at top-level for all links,
21 #      on a single object just for that object
22 # SOLINK - linker flags used only for creating dynamically loadable modules
23 #          as .so files
24 # DYLINK - linker flags used only for creating shared libaries
25 #          (.so files on Unix-type platforms, .dylib on Darwin)
26 #
27 # Values for ASTCFLAGS and ASTLDFLAGS can be specified in the
28 # environment when running make, as follows:
29 #
30 #       $ ASTCFLAGS="-Werror" make ...
31 #
32 # or as a variable value on the make command line itself:
33 #
34 #       $ make ASTCFLAGS="-Werror" ...
35
36 export ASTTOPDIR                # Top level dir, used in subdirs' Makefiles
37 export ASTERISKVERSION
38 export ASTERISKVERSIONNUM
39
40 #--- values used for default paths
41
42 # DESTDIR is the staging (or final) directory where files are copied
43 # during the install process. Define it before 'export', otherwise
44 # export will set it to the empty string making ?= fail.
45 # Trying to run asterisk from the DESTDIR is completely unsupported
46 # behavior.
47 # WARNING: do not put spaces or comments after the value.
48 DESTDIR?=$(INSTALL_PATH)
49 export DESTDIR
50
51 export INSTALL_PATH       # Additional prefix for the following paths
52 export ASTETCDIR          # Path for config files
53 export ASTVARRUNDIR
54 export ASTSPOOLDIR
55 export ASTVARLIBDIR
56 export ASTDATADIR
57 export ASTDBDIR
58 export ASTLOGDIR
59 export ASTLIBDIR
60 export ASTMODDIR
61 export ASTMANDIR
62 export ASTHEADERDIR
63 export ASTSBINDIR
64 export AGI_DIR
65 export ASTCONFPATH
66 export ASTKEYDIR
67
68 export OSARCH             # Operating system
69
70 export NOISY_BUILD        # Used in Makefile.rules
71 export MENUSELECT_CFLAGS  # Options selected in menuselect.
72 export AST_DEVMODE        # Set to "yes" for additional compiler
73                           # and runtime checks
74 export AST_DEVMODE_STRICT # Enables shadow warnings (-Wshadow)
75
76 export _SOLINK            # linker flags for all shared objects
77 export SOLINK             # linker flags for loadable modules
78 export DYLINK             # linker flags for shared libraries
79 export STATIC_BUILD       # Additional cflags, set to -static
80                           # for static builds. Probably
81                           # should go directly to ASTLDFLAGS
82
83 #--- paths to various commands
84 # The makeopts include below tries to set these if they're found during
85 # configure.
86 export CC
87 export CXX
88 export AR
89 export RANLIB
90 export HOST_CC
91 export BUILD_CC
92 export INSTALL
93 export STRIP
94 export DOWNLOAD
95 export AWK
96 export GREP
97 export MD5
98 export WGET_EXTRA_ARGS
99 export LDCONFIG
100 export LDCONFIG_FLAGS
101 export PYTHON
102
103 -include makeopts
104
105 # start the primary CFLAGS and LDFLAGS with any that were provided
106 # to the configure script
107 _ASTCFLAGS:=$(CONFIG_CFLAGS)
108 _ASTLDFLAGS:=$(CONFIG_LDFLAGS)
109
110 # Some build systems, such as the one in openwrt, like to pass custom target
111 # CFLAGS and LDFLAGS in the COPTS and LDOPTS variables; these should also
112 # go before any build-system computed flags, since they are defaults, not
113 # overrides
114 _ASTCFLAGS+=$(COPTS)
115 _ASTLDFLAGS+=$(LDOPTS)
116
117 # libxml2 cflags
118 _ASTCFLAGS+=$(LIBXML2_INCLUDE)
119
120 #Uncomment this to see all build commands instead of 'quiet' output
121 #NOISY_BUILD=yes
122
123 empty:=
124 space:=$(empty) $(empty)
125 ASTTOPDIR:=$(subst $(space),\$(space),$(CURDIR))
126
127 # Overwite config files on "make samples"
128 OVERWRITE=y
129
130 # Include debug and macro symbols in the executables (-g) and profiling info (-pg)
131 DEBUG=-g3
132
133 # Asterisk.conf is located in ASTETCDIR or by using the -C flag
134 # when starting Asterisk
135 ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
136 AGI_DIR=$(ASTDATADIR)/agi-bin
137
138 # If you use Apache, you may determine by a grep 'DocumentRoot' of your httpd.conf file
139 HTTP_DOCSDIR=/var/www/html
140 # Determine by a grep 'ScriptAlias' of your Apache httpd.conf file
141 HTTP_CGIDIR=/var/www/cgi-bin
142
143 # If your platform's linker expects a prefix on symbols generated from compiling C
144 # source files, set LINKER_SYMBOL_PREFIX to that value. On some systems, exported symbols
145 # from C source files are prefixed with '_', for example. If this value is not set
146 # properly, the linker scripts that live in the '*.exports' files in various places
147 # in this tree will unintentionally suppress symbols that should be visible
148 # in the final binary objects.
149 LINKER_SYMBOL_PREFIX=
150
151 # Uncomment this to use the older DSP routines
152 #_ASTCFLAGS+=-DOLD_DSP_ROUTINES
153
154 # If the file .asterisk.makeopts is present in your home directory, you can
155 # include all of your favorite menuselect options so that every time you download
156 # a new version of Asterisk, you don't have to run menuselect to set them.
157 # The file /etc/asterisk.makeopts will also be included but can be overridden
158 # by the file in your home directory.
159
160 GLOBAL_MAKEOPTS=$(wildcard /etc/asterisk.makeopts)
161 USER_MAKEOPTS=$(wildcard ~/.asterisk.makeopts)
162
163 MOD_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
164 OTHER_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
165
166 # Create OPTIONS variable, but probably we can assign directly to ASTCFLAGS
167 OPTIONS=
168
169 ifeq ($(OSARCH),linux-gnu)
170   # flag to tell 'ldconfig' to only process specified directories
171   LDCONFIG_FLAGS=-n
172 endif
173
174 ifeq ($(findstring -save-temps,$(_ASTCFLAGS) $(ASTCFLAGS)),)
175   ifeq ($(findstring -pipe,$(_ASTCFLAGS) $(ASTCFLAGS)),)
176     _ASTCFLAGS+=-pipe
177   endif
178 endif
179
180 ifeq ($(findstring -Wall,$(_ASTCFLAGS) $(ASTCFLAGS)),)
181   _ASTCFLAGS+=-Wall
182 endif
183
184 _ASTCFLAGS+=-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(AST_NESTED_FUNCTIONS) $(DEBUG)
185 ADDL_TARGETS=
186
187 ifeq ($(AST_DEVMODE),yes)
188   _ASTCFLAGS+=-Werror
189   _ASTCFLAGS+=-Wunused
190   _ASTCFLAGS+=$(AST_DECLARATION_AFTER_STATEMENT)
191   _ASTCFLAGS+=$(AST_FORTIFY_SOURCE)
192   _ASTCFLAGS+=$(AST_TRAMPOLINES)
193   _ASTCFLAGS+=-Wundef
194   _ASTCFLAGS+=-Wmissing-format-attribute
195   _ASTCFLAGS+=-Wformat=2
196   ifeq ($(AST_DEVMODE_STRICT),yes)
197     _ASTCFLAGS+=-Wshadow
198   endif
199   ADDL_TARGETS+=validate-docs
200 endif
201
202 ifneq ($(findstring BSD,$(OSARCH)),)
203   _ASTCFLAGS+=-isystem /usr/local/include
204 endif
205
206 ifeq ($(OSARCH),FreeBSD)
207   # -V is understood by BSD Make, not by GNU make.
208   BSDVERSION=$(shell make -V OSVERSION -f /usr/share/mk/bsd.port.subdir.mk)
209   _ASTCFLAGS+=$(shell if test $(BSDVERSION) -lt 500016 ; then echo "-D_THREAD_SAFE"; fi)
210   # flag to tell 'ldconfig' to only process specified directories
211   LDCONFIG_FLAGS=-m
212 endif
213
214 ifeq ($(OSARCH),NetBSD)
215   _ASTCFLAGS+=-pthread -I/usr/pkg/include
216 endif
217
218 ifeq ($(OSARCH),OpenBSD)
219   _ASTCFLAGS+=-pthread -ftrampolines
220 endif
221
222 ifeq ($(OSARCH),SunOS)
223   _ASTCFLAGS+=-Wcast-align -DSOLARIS -I../include/solaris-compat -I/opt/ssl/include -I/usr/local/ssl/include -D_XPG4_2 -D__EXTENSIONS__
224 endif
225
226 ifneq ($(GREP),)
227   ASTERISKVERSION:=$(shell GREP=$(GREP) AWK=$(AWK) GIT=$(GIT) build_tools/make_version .)
228 endif
229 ifneq ($(AWK),)
230   ifneq ($(wildcard .version),)
231     ASTERISKVERSIONNUM:=$(shell $(AWK) -F. '{printf "%01d%02d%02d", $$1, $$2, $$3}' .version)
232   endif
233 endif
234
235 ifneq ($(wildcard .svn),)
236   ASTERISKVERSIONNUM:=999999
237 endif
238
239 _ASTCFLAGS+=$(OPTIONS)
240
241 MOD_SUBDIRS:=channels pbx apps codecs formats cdr cel bridges funcs tests main res addons $(LOCAL_MOD_SUBDIRS)
242 OTHER_SUBDIRS:=utils agi
243 SUBDIRS:=$(OTHER_SUBDIRS) $(MOD_SUBDIRS)
244 SUBDIRS_INSTALL:=$(SUBDIRS:%=%-install)
245 SUBDIRS_CLEAN:=$(SUBDIRS:%=%-clean)
246 SUBDIRS_DIST_CLEAN:=$(SUBDIRS:%=%-dist-clean)
247 SUBDIRS_UNINSTALL:=$(SUBDIRS:%=%-uninstall)
248 MOD_SUBDIRS_EMBED_LDSCRIPT:=$(MOD_SUBDIRS:%=%-embed-ldscript)
249 MOD_SUBDIRS_EMBED_LDFLAGS:=$(MOD_SUBDIRS:%=%-embed-ldflags)
250 MOD_SUBDIRS_EMBED_LIBS:=$(MOD_SUBDIRS:%=%-embed-libs)
251 MOD_SUBDIRS_MENUSELECT_TREE:=$(MOD_SUBDIRS:%=%-menuselect-tree)
252
253 ifneq ($(findstring darwin,$(OSARCH)),)
254   _ASTCFLAGS+=-D__Darwin__
255   _SOLINK=-Xlinker -macosx_version_min -Xlinker 10.6 -Xlinker -undefined -Xlinker dynamic_lookup
256   _SOLINK+=/usr/lib/bundle1.o
257   SOLINK=-bundle $(_SOLINK)
258   DYLINK=-Xlinker -dylib $(_SOLINK)
259   _ASTLDFLAGS+=-L/usr/local/lib
260 else
261 # These are used for all but Darwin
262   SOLINK=-shared
263   DYLINK=$(SOLINK)
264   ifneq ($(findstring BSD,$(OSARCH)),)
265     _ASTLDFLAGS+=-L/usr/local/lib
266   endif
267 endif
268
269 # Include rpath settings
270 _ASTLDFLAGS+=$(AST_RPATH)
271
272 ifeq ($(OSARCH),SunOS)
273   SOLINK=-shared -fpic -L/usr/local/ssl/lib -lrt
274   DYLINK=$(SOLINK)
275 endif
276
277 ifeq ($(OSARCH),OpenBSD)
278   SOLINK=-shared -fpic
279   DYLINK=$(SOLINK)
280 endif
281
282 # comment to print directories during submakes
283 #PRINT_DIR=yes
284
285 ifneq ($(INSIDE_EMACS),)
286 PRINT_DIR=yes
287 endif
288
289 SILENTMAKE:=$(MAKE) --quiet --no-print-directory
290 ifneq ($(PRINT_DIR)$(NOISY_BUILD),)
291 SUBMAKE:=$(MAKE)
292 else
293 SUBMAKE:=$(MAKE) --quiet --no-print-directory
294 endif
295
296 # $(MAKE) is printed in several places, and we want it to be a
297 # fixed size string. Define a variable whose name has also the
298 # same size, so we can easily align text.
299 ifeq ($(MAKE), gmake)
300         mK="gmake"
301 else
302         mK=" make"
303 endif
304
305 all: _all
306         @echo " +--------- Asterisk Build Complete ---------+"
307         @echo " + Asterisk has successfully been built, and +"
308         @echo " + can be installed by running:              +"
309         @echo " +                                           +"
310         @echo " +               $(mK) install               +"
311         @echo " +-------------------------------------------+"
312
313 full: _full
314         @echo " +--------- Asterisk Build Complete ---------+"
315         @echo " + Asterisk has successfully been built, and +"
316         @echo " + can be installed by running:              +"
317         @echo " +                                           +"
318         @echo " +               $(mK) install               +"
319         @echo " +-------------------------------------------+"
320
321
322 _all: makeopts $(SUBDIRS) doc/core-en_US.xml $(ADDL_TARGETS)
323
324 _full: makeopts $(SUBDIRS) doc/full-en_US.xml $(ADDL_TARGETS)
325
326 makeopts: configure
327         @echo "****"
328         @echo "**** The configure script must be executed before running '$(MAKE)'."
329         @echo "****               Please run \"./configure\"."
330         @echo "****"
331         @exit 1
332
333 menuselect.makeopts: menuselect/menuselect menuselect-tree makeopts build_tools/menuselect-deps $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
334 ifeq ($(filter %menuselect,$(MAKECMDGOALS)),)
335         menuselect/menuselect --check-deps $@
336         menuselect/menuselect --check-deps $@ $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
337 endif
338
339 $(MOD_SUBDIRS_EMBED_LDSCRIPT):
340         +@echo "EMBED_LDSCRIPTS+="`$(SILENTMAKE) -C $(@:-embed-ldscript=) SUBDIR=$(@:-embed-ldscript=) __embed_ldscript` >> makeopts.embed_rules
341
342 $(MOD_SUBDIRS_EMBED_LDFLAGS):
343         +@echo "EMBED_LDFLAGS+="`$(SILENTMAKE) -C $(@:-embed-ldflags=) SUBDIR=$(@:-embed-ldflags=) __embed_ldflags` >> makeopts.embed_rules
344
345 $(MOD_SUBDIRS_EMBED_LIBS):
346         +@echo "EMBED_LIBS+="`$(SILENTMAKE) -C $(@:-embed-libs=) SUBDIR=$(@:-embed-libs=) __embed_libs` >> makeopts.embed_rules
347
348 $(MOD_SUBDIRS_MENUSELECT_TREE):
349         +@$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) moduleinfo
350         +@$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) makeopts
351
352 makeopts.embed_rules: menuselect.makeopts
353         @echo "Generating embedded module rules ..."
354         @rm -f $@
355         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDSCRIPT)
356         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDFLAGS)
357         +@$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LIBS)
358
359 $(SUBDIRS): makeopts .lastclean main/version.c include/asterisk/build.h include/asterisk/buildopts.h defaults.h makeopts.embed_rules
360
361 ifeq ($(findstring $(OSARCH), mingw32 cygwin ),)
362     # Non-windows:
363     # ensure that all module subdirectories are processed before 'main' during
364     # a parallel build, since if there are modules selected to be embedded the
365     # directories containing them must be completed before the main Asterisk
366     # binary can be built
367 main: $(filter-out main,$(MOD_SUBDIRS))
368 else
369     # Windows: we need to build main (i.e. the asterisk dll) first,
370     # followed by res, followed by the other directories, because
371     # dll symbols must be resolved during linking and not at runtime.
372 D1:= $(filter-out main,$(MOD_SUBDIRS))
373 D1:= $(filter-out res,$(D1))
374
375 $(D1): res
376 res:    main
377 endif
378
379 $(MOD_SUBDIRS): makeopts
380         +@_ASTCFLAGS="$(MOD_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
381
382 $(OTHER_SUBDIRS): makeopts
383         +@_ASTCFLAGS="$(OTHER_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
384
385 defaults.h: makeopts .lastclean build_tools/make_defaults_h
386         @build_tools/make_defaults_h > $@.tmp
387         @cmp -s $@.tmp $@ || mv $@.tmp $@
388         @rm -f $@.tmp
389
390 main/version.c: FORCE .lastclean
391         @build_tools/make_version_c > $@.tmp
392         @cmp -s $@.tmp $@ || mv $@.tmp $@
393         @rm -f $@.tmp
394
395 include/asterisk/buildopts.h: menuselect.makeopts .lastclean
396         @build_tools/make_buildopts_h > $@.tmp
397         @cmp -s $@.tmp $@ || mv $@.tmp $@
398         @rm -f $@.tmp
399
400 # build.h must depend on .lastclean, or parallel make may wipe it out after it's
401 # been created.
402 include/asterisk/build.h: .lastclean
403         @build_tools/make_build_h > $@
404
405 $(SUBDIRS_CLEAN):
406         +@$(SUBMAKE) -C $(@:-clean=) clean
407
408 $(SUBDIRS_DIST_CLEAN):
409         +@$(SUBMAKE) -C $(@:-dist-clean=) dist-clean
410
411 clean: $(SUBDIRS_CLEAN) _clean
412
413 _clean:
414         rm -f defaults.h
415         rm -f include/asterisk/build.h
416         rm -f main/version.c
417         rm -f doc/core-en_US.xml
418         rm -f doc/full-en_US.xml
419         @$(MAKE) -C menuselect clean
420         cp -f .cleancount .lastclean
421
422 dist-clean: distclean
423
424 distclean: $(SUBDIRS_DIST_CLEAN) _clean
425         @$(MAKE) -C menuselect dist-clean
426         @$(MAKE) -C sounds dist-clean
427         rm -f menuselect.makeopts makeopts menuselect-tree menuselect.makedeps
428         rm -f makeopts.embed_rules
429         rm -f config.log config.status config.cache
430         rm -rf autom4te.cache
431         rm -f include/asterisk/autoconfig.h
432         rm -f include/asterisk/buildopts.h
433         rm -rf doc/api
434         rm -f build_tools/menuselect-deps
435
436 datafiles: _all doc/core-en_US.xml
437         CFLAGS="$(_ASTCFLAGS) $(ASTCFLAGS)" build_tools/mkpkgconfig "$(DESTDIR)$(libdir)/pkgconfig";
438 # Should static HTTP be installed during make samples or even with its own target ala
439 # webvoicemail?  There are portions here that *could* be customized but might also be
440 # improved a lot.  I'll put it here for now.
441
442         for x in static-http/*; do \
443                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/static-http" ; \
444         done
445         $(INSTALL) -m 644 doc/core-en_US.xml "$(DESTDIR)$(ASTDATADIR)/static-http";
446         if [ -d doc/tex/asterisk ] ; then \
447                 $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/static-http/docs" ; \
448                 for n in doc/tex/asterisk/* ; do \
449                         $(INSTALL) -m 644 $$n "$(DESTDIR)$(ASTDATADIR)/static-http/docs" ; \
450                 done \
451         fi
452         for x in images/*.jpg; do \
453                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/images" ; \
454         done
455         $(MAKE) -C sounds install
456
457 ifneq ($(GREP),)
458   XML_core_en_US = $(foreach dir,$(MOD_SUBDIRS),$(shell $(GREP) -l "language=\"en_US\"" $(dir)/*.c $(dir)/*.cc 2>/dev/null))
459 endif
460
461 doc/core-en_US.xml: makeopts .lastclean $(XML_core_en_US)
462         @printf "Building Documentation For: "
463         @echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $@
464         @echo "<!DOCTYPE docs SYSTEM \"appdocsxml.dtd\">" >> $@
465         @echo "<docs xmlns:xi=\"http://www.w3.org/2001/XInclude\">" >> $@
466         @for x in $(MOD_SUBDIRS); do \
467                 printf "$$x " ; \
468                 for i in `find $$x -name *.c`; do \
469                         $(AWK) -f build_tools/get_documentation $$i >> $@ ; \
470                 done ; \
471         done
472         @echo
473         @echo "</docs>" >> $@
474
475 ifneq ($(GREP),)
476   XMX_full_en_US = $(foreach dir,$(MOD_SUBDIRS),$(shell $(GREP) -l "language=\"en_US\"" $(dir)/*.c $(dir)/*.cc 2>/dev/null))
477 endif
478
479 doc/full-en_US.xml: makeopts .lastclean $(XML_full_en_US)
480 ifeq ($(PYTHON),:)
481         @echo "--------------------------------------------------------------------------"
482         @echo "---        Please install python to build full documentation           ---"
483         @echo "--------------------------------------------------------------------------"
484 else
485         @printf "Building Documentation For: "
486         @echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $@
487         @echo "<!DOCTYPE docs SYSTEM \"appdocsxml.dtd\">" >> $@
488         @echo "<docs xmlns:xi=\"http://www.w3.org/2001/XInclude\">" >> $@
489         @for x in $(MOD_SUBDIRS); do \
490                 printf "$$x " ; \
491                 for i in $$x/*.c; do \
492                         $(PYTHON) build_tools/get_documentation.py < $$i >> $@ ; \
493                 done ; \
494         done
495         @echo
496         @echo "</docs>" >> $@
497         @$(PYTHON) build_tools/post_process_documentation.py -i $@ -o "doc/core-en_US.xml"
498 endif
499
500 validate-docs: doc/core-en_US.xml
501 ifeq ($(XMLSTARLET)$(XMLLINT),::)
502         @echo "--------------------------------------------------------------------------"
503         @echo "--- Please install xmllint or xmlstarlet to validate the documentation ---"
504         @echo "--------------------------------------------------------------------------"
505 else
506   ifneq ($(XMLLINT),:)
507         $(XMLLINT) --dtdvalid doc/appdocsxml.dtd --noout $<
508   else
509         $(XMLSTARLET) val -d doc/appdocsxml.dtd $<
510   endif
511 endif
512
513 update:
514         @if [ -d .svn ]; then \
515                 echo "Updating from Subversion..." ; \
516                 fromrev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
517                 svn update | tee update.out; \
518                 torev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
519                 echo "`date`  Updated from revision $${fromrev} to $${torev}." >> update.log; \
520                 rm -f .version; \
521                 if [ `grep -c ^C update.out` -gt 0 ]; then \
522                         echo ; echo "The following files have conflicts:" ; \
523                         grep ^C update.out | cut -b4- ; \
524                 fi ; \
525                 rm -f update.out; \
526         else \
527                 echo "Not under version control";  \
528         fi
529
530 NEWHEADERS=$(notdir $(wildcard include/asterisk/*.h))
531 OLDHEADERS=$(filter-out $(NEWHEADERS) $(notdir $(DESTDIR)$(ASTHEADERDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTHEADERDIR)/*.h)))
532 INSTALLDIRS="$(ASTLIBDIR)" "$(ASTMODDIR)" "$(ASTSBINDIR)" "$(ASTETCDIR)" "$(ASTVARRUNDIR)" \
533         "$(ASTSPOOLDIR)" "$(ASTSPOOLDIR)/dictate" "$(ASTSPOOLDIR)/meetme" \
534         "$(ASTSPOOLDIR)/monitor" "$(ASTSPOOLDIR)/system" "$(ASTSPOOLDIR)/tmp" \
535         "$(ASTSPOOLDIR)/voicemail" "$(ASTHEADERDIR)" "$(ASTHEADERDIR)/doxygen" \
536         "$(ASTLOGDIR)" "$(ASTLOGDIR)/cdr-csv" "$(ASTLOGDIR)/cdr-custom" \
537         "$(ASTLOGDIR)/cel-custom" "$(ASTDATADIR)" "$(ASTDATADIR)/documentation" \
538         "$(ASTDATADIR)/documentation/thirdparty" "$(ASTDATADIR)/firmware" \
539         "$(ASTDATADIR)/firmware/iax" "$(ASTDATADIR)/images" "$(ASTDATADIR)/keys" \
540         "$(ASTDATADIR)/phoneprov" "$(ASTDATADIR)/static-http" "$(ASTDATADIR)/sounds" \
541         "$(ASTDATADIR)/moh" "$(ASTMANDIR)/man8" "$(AGI_DIR)" "$(ASTDBDIR)"
542
543 installdirs:
544         @for i in $(INSTALLDIRS); do \
545                 if [ ! -z "$${i}" -a ! -d "$(DESTDIR)$${i}" ]; then \
546                         $(INSTALL) -d "$(DESTDIR)$${i}"; \
547                 fi; \
548         done
549
550 main-bininstall:
551         +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTLIBDIR="$(ASTLIBDIR)" $(SUBMAKE) -C main bininstall
552
553 bininstall: _all installdirs $(SUBDIRS_INSTALL) main-bininstall
554         $(INSTALL) -m 755 contrib/scripts/astgenkey "$(DESTDIR)$(ASTSBINDIR)/"
555         $(INSTALL) -m 755 contrib/scripts/autosupport "$(DESTDIR)$(ASTSBINDIR)/"
556         if [ ! -f "$(DESTDIR)$(ASTSBINDIR)/safe_asterisk" -a ! -f /sbin/launchd ]; then \
557                 cat contrib/scripts/safe_asterisk | sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;s|__ASTERISK_LOG_DIR__|$(ASTLOGDIR)|;' > contrib/scripts/safe.tmp ; \
558                 $(INSTALL) -m 755 contrib/scripts/safe.tmp "$(DESTDIR)$(ASTSBINDIR)/safe_asterisk" ; \
559                 rm -f contrib/scripts/safe.tmp ; \
560         fi
561         $(INSTALL) -m 644 include/asterisk.h "$(DESTDIR)$(includedir)"
562         $(INSTALL) -m 644 include/asterisk/*.h "$(DESTDIR)$(ASTHEADERDIR)"
563         $(INSTALL) -m 644 include/asterisk/doxygen/*.h "$(DESTDIR)$(ASTHEADERDIR)/doxygen"
564         if [ -n "$(OLDHEADERS)" ]; then \
565                 for h in $(OLDHEADERS); do rm -f "$(DESTDIR)$(ASTHEADERDIR)/$$h"; done \
566         fi
567
568         $(INSTALL) -m 644 doc/core-*.xml "$(DESTDIR)$(ASTDATADIR)/documentation"
569         $(INSTALL) -m 644 doc/appdocsxml.dtd "$(DESTDIR)$(ASTDATADIR)/documentation"
570         $(INSTALL) -m 644 doc/asterisk.8 "$(DESTDIR)$(ASTMANDIR)/man8"
571         $(INSTALL) -m 644 contrib/scripts/astgenkey.8 "$(DESTDIR)$(ASTMANDIR)/man8"
572         $(INSTALL) -m 644 contrib/scripts/autosupport.8 "$(DESTDIR)$(ASTMANDIR)/man8"
573         $(INSTALL) -m 644 contrib/scripts/safe_asterisk.8 "$(DESTDIR)$(ASTMANDIR)/man8"
574         if [ -f contrib/firmware/iax/iaxy.bin ] ; then \
575                 $(INSTALL) -m 644 contrib/firmware/iax/iaxy.bin "$(DESTDIR)$(ASTDATADIR)/firmware/iax/iaxy.bin"; \
576         fi
577
578 $(SUBDIRS_INSTALL):
579         +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" $(SUBMAKE) -C $(@:-install=) install
580
581 NEWMODS:=$(foreach d,$(MOD_SUBDIRS),$(notdir $(wildcard $(d)/*.so)))
582 OLDMODS=$(filter-out $(NEWMODS) $(notdir $(DESTDIR)$(ASTMODDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTMODDIR)/*.so)))
583
584 oldmodcheck:
585         @if [ -n "$(OLDMODS)" ]; then \
586                 echo " WARNING WARNING WARNING" ;\
587                 echo "" ;\
588                 echo " Your Asterisk modules directory, located at" ;\
589                 echo " $(DESTDIR)$(ASTMODDIR)" ;\
590                 echo " contains modules that were not installed by this " ;\
591                 echo " version of Asterisk. Please ensure that these" ;\
592                 echo " modules are compatible with this version before" ;\
593                 echo " attempting to run Asterisk." ;\
594                 echo "" ;\
595                 for f in $(OLDMODS); do \
596                         echo "    $$f" ;\
597                 done ;\
598                 echo "" ;\
599                 echo " WARNING WARNING WARNING" ;\
600         fi
601
602 badshell:
603 ifneq ($(findstring ~,$(DESTDIR)),)
604         @echo "Your shell doesn't do ~ expansion when expected (specifically, when doing \"make install DESTDIR=~/path\")."
605         @echo "Try replacing ~ with \$$HOME, as in \"make install DESTDIR=\$$HOME/path\"."
606         @exit 1
607 endif
608
609 install: badshell bininstall datafiles
610         @if [ -x /usr/sbin/asterisk-post-install ]; then \
611                 /usr/sbin/asterisk-post-install "$(DESTDIR)" . ; \
612         fi
613         @echo " +---- Asterisk Installation Complete -------+"
614         @echo " +                                           +"
615         @echo " +    YOU MUST READ THE SECURITY DOCUMENT    +"
616         @echo " +                                           +"
617         @echo " + Asterisk has successfully been installed. +"
618         @echo " + If you would like to install the sample   +"
619         @echo " + configuration files (overwriting any      +"
620         @echo " + existing config files), run:              +"
621         @echo " +                                           +"
622         @echo " +               $(mK) samples               +"
623         @echo " +                                           +"
624         @echo " +-----------------  or ---------------------+"
625         @echo " +                                           +"
626         @echo " + You can go ahead and install the asterisk +"
627         @echo " + program documentation now or later run:   +"
628         @echo " +                                           +"
629         @echo " +              $(mK) progdocs               +"
630         @echo " +                                           +"
631         @echo " + **Note** This requires that you have      +"
632         @echo " + doxygen installed on your local system    +"
633         @echo " +-------------------------------------------+"
634         @$(MAKE) -s oldmodcheck
635
636 isntall: install
637
638 upgrade: bininstall
639
640 # XXX why *.adsi is installed first ?
641 adsi:
642         @echo Installing adsi config files...
643         $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)"
644         @for x in configs/*.adsi; do \
645                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
646                 if [ -f "$${dst}" ] ; then \
647                         echo "Overwriting $$x" ; \
648                 else \
649                         echo "Installing $$x" ; \
650                 fi ; \
651                 $(INSTALL) -m 644 "$$x" "$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
652         done
653
654 samples: adsi
655         @echo Installing other config files...
656         @for x in configs/*.sample; do \
657                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x .sample`" ;        \
658                 if [ -f "$${dst}" ]; then \
659                         if [ "$(OVERWRITE)" = "y" ]; then \
660                                 if cmp -s "$${dst}" "$$x" ; then \
661                                         echo "Config file $$x is unchanged"; \
662                                         continue; \
663                                 fi ; \
664                                 mv -f "$${dst}" "$${dst}.old" ; \
665                         else \
666                                 echo "Skipping config file $$x"; \
667                                 continue; \
668                         fi ;\
669                 fi ; \
670                 echo "Installing file $$x"; \
671                 $(INSTALL) -m 644 "$$x" "$${dst}" ;\
672         done
673         if [ "$(OVERWRITE)" = "y" ]; then \
674                 echo "Updating asterisk.conf" ; \
675                 sed -e 's|^astetcdir.*$$|astetcdir => $(ASTETCDIR)|' \
676                         -e 's|^astmoddir.*$$|astmoddir => $(ASTMODDIR)|' \
677                         -e 's|^astvarlibdir.*$$|astvarlibdir => $(ASTVARLIBDIR)|' \
678                         -e 's|^astdbdir.*$$|astdbdir => $(ASTDBDIR)|' \
679                         -e 's|^astkeydir.*$$|astkeydir => $(ASTKEYDIR)|' \
680                         -e 's|^astdatadir.*$$|astdatadir => $(ASTDATADIR)|' \
681                         -e 's|^astagidir.*$$|astagidir => $(AGI_DIR)|' \
682                         -e 's|^astspooldir.*$$|astspooldir => $(ASTSPOOLDIR)|' \
683                         -e 's|^astrundir.*$$|astrundir => $(ASTVARRUNDIR)|' \
684                         -e 's|^astlogdir.*$$|astlogdir => $(ASTLOGDIR)|' \
685                         -e 's|^astsbindir.*$$|astsbindir => $(ASTSBINDIR)|' \
686                         "$(DESTDIR)$(ASTCONFPATH)" > "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
687                 $(INSTALL) -m 644 "$(DESTDIR)$(ASTCONFPATH).tmp" "$(DESTDIR)$(ASTCONFPATH)" ; \
688                 rm -f "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
689         fi ; \
690         $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX"
691         build_tools/make_sample_voicemail "$(DESTDIR)/$(ASTDATADIR)" "$(DESTDIR)/$(ASTSPOOLDIR)"
692
693         @for x in phoneprov/*; do \
694                 dst="$(DESTDIR)$(ASTDATADIR)/$$x" ;     \
695                 if [ -f "$${dst}" ]; then \
696                         if [ "$(OVERWRITE)" = "y" ]; then \
697                                 if cmp -s "$${dst}" "$$x" ; then \
698                                         echo "Config file $$x is unchanged"; \
699                                         continue; \
700                                 fi ; \
701                                 mv -f "$${dst}" "$${dst}.old" ; \
702                         else \
703                                 echo "Skipping config file $$x"; \
704                                 continue; \
705                         fi ;\
706                 fi ; \
707                 echo "Installing file $$x"; \
708                 $(INSTALL) -m 644 "$$x" "$${dst}" ;\
709         done
710
711 webvmail:
712         @[ -d "$(DESTDIR)$(HTTP_DOCSDIR)/" ] || ( printf "http docs directory not found.\nUpdate assignment of variable HTTP_DOCSDIR in Makefile!\n" && exit 1 )
713         @[ -d "$(DESTDIR)$(HTTP_CGIDIR)" ] || ( printf "cgi-bin directory not found.\nUpdate assignment of variable HTTP_CGIDIR in Makefile!\n" && exit 1 )
714         $(INSTALL) -m 4755 contrib/scripts/vmail.cgi "$(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi"
715         $(INSTALL) -d "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk"
716         for x in images/*.gif; do \
717                 $(INSTALL) -m 644 $$x "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/"; \
718         done
719         @echo " +--------- Asterisk Web Voicemail ----------+"
720         @echo " +                                           +"
721         @echo " + Asterisk Web Voicemail is installed in    +"
722         @echo " + your cgi-bin directory:                   +"
723         @echo " + $(DESTDIR)$(HTTP_CGIDIR)"
724         @echo " + IT USES A SETUID ROOT PERL SCRIPT, SO     +"
725         @echo " + IF YOU DON'T LIKE THAT, UNINSTALL IT!     +"
726         @echo " +                                           +"
727         @echo " + Other static items have been stored in:   +"
728         @echo " + $(DESTDIR)$(HTTP_DOCSDIR)"
729         @echo " +                                           +"
730         @echo " + If these paths do not match your httpd    +"
731         @echo " + installation, correct the definitions     +"
732         @echo " + in your Makefile of HTTP_CGIDIR and       +"
733         @echo " + HTTP_DOCSDIR                              +"
734         @echo " +                                           +"
735         @echo " +-------------------------------------------+"
736
737 progdocs:
738         # Note, Makefile conditionals must not be tabbed out. Wasted hours with that.
739 ifeq ($(DOXYGEN),:)
740         @echo "Doxygen is not installed.  Please install and re-run the configuration script."
741 else
742 ifeq ($(DOT),:)
743         @echo "DOT is not installed. Doxygen will not produce any diagrams. Please install and re-run the configuration script."
744 else
745         # Enable DOT
746         @echo "HAVE_DOT = YES" >> contrib/asterisk-ng-doxygen
747 endif
748         # Set Doxygen PROJECT_NUMBER variable
749 ifneq ($(ASTERISKVERSION),UNKNOWN__and_probably_unsupported)
750         @echo "PROJECT_NUMBER = $(ASTERISKVERSION)" >> contrib/asterisk-ng-doxygen
751 else
752         echo "Asterisk Version is unknown, not configuring Doxygen PROJECT_NUMBER."
753 endif
754         # Validate Doxygen Configuration
755         @doxygen -u contrib/asterisk-ng-doxygen
756         # Run Doxygen
757         @doxygen contrib/asterisk-ng-doxygen
758         # Remove configuration backup file
759         @rm -f contrib/asterisk-ng-doxygen.bak
760 endif
761
762 install-logrotate:
763         if [ ! -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ]; then \
764                 $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ; \
765         fi
766         sed 's#__LOGDIR__#$(ASTLOGDIR)#g' < contrib/scripts/asterisk.logrotate | sed 's#__SBINDIR__#$(ASTSBINDIR)#g' > contrib/scripts/asterisk.logrotate.tmp
767         $(INSTALL) -m 0644 contrib/scripts/asterisk.logrotate.tmp "$(DESTDIR)$(ASTETCDIR)/../logrotate.d/asterisk"
768         rm -f contrib/scripts/asterisk.logrotate.tmp
769
770 config:
771         @if [ "${OSARCH}" = "linux-gnu" ]; then \
772                 if [ -f /etc/redhat-release -o -f /etc/fedora-release ]; then \
773                         cat contrib/init.d/rc.redhat.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
774                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/init.d/asterisk" ; \
775                         rm -f contrib/init.d/rc.asterisk.tmp ; \
776                         if [ ! -f "$(DESTDIR)/etc/sysconfig/asterisk" ] ; then \
777                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
778                         fi ; \
779                         if [ -z "$(DESTDIR)" ] ; then \
780                                 /sbin/chkconfig --add asterisk ; \
781                         fi ; \
782                 elif [ -f /etc/debian_version ] ; then \
783                         cat contrib/init.d/rc.debian.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
784                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ; \
785                         rm -f contrib/init.d/rc.asterisk.tmp ; \
786                         if [ ! -f "$(DESTDIR)/etc/default/asterisk" ] ; then \
787                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/default/asterisk" ; \
788                         fi ; \
789                         if [ -z "$(DESTDIR)" ] ; then \
790                                 /usr/sbin/update-rc.d asterisk defaults 50 91 ; \
791                         fi ; \
792                 elif [ -f /etc/gentoo-release ] ; then \
793                         cat contrib/init.d/rc.gentoo.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
794                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ; \
795                         rm -f contrib/init.d/rc.asterisk.tmp ; \
796                         if [ -z "$(DESTDIR)" ] ; then \
797                                 /sbin/rc-update add asterisk default ; \
798                         fi ; \
799                 elif [ -f /etc/mandrake-release -o -f /etc/mandriva-release ] ; then \
800                         cat contrib/init.d/rc.mandriva.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
801                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/init.d/asterisk" ; \
802                         rm -f contrib/init.d/rc.asterisk.tmp ; \
803                         if [ ! -f /etc/sysconfig/asterisk ] ; then \
804                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
805                         fi ; \
806                         if [ -z "$(DESTDIR)" ] ; then \
807                                 /sbin/chkconfig --add asterisk ; \
808                         fi ; \
809                 elif [ -f /etc/SuSE-release -o -f /etc/novell-release ] ; then \
810                         cat contrib/init.d/rc.suse.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
811                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/init.d/asterisk" ;\
812                         rm -f contrib/init.d/rc.asterisk.tmp ; \
813                         if [ ! -f /etc/sysconfig/asterisk ] ; then \
814                                 $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
815                         fi ; \
816                         if [ -z "$(DESTDIR)" ] ; then \
817                                 /sbin/chkconfig --add asterisk ; \
818                         fi ; \
819                 elif [ -f /etc/arch-release -o -f /etc/arch-release ] ; then \
820                         cat contrib/init.d/rc.archlinux.asterisk | sed 's|__ASTERISK_ETC_DIR__|$(ASTETCDIR)|;s|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > contrib/init.d/rc.asterisk.tmp ; \
821                         $(INSTALL) -m 755 contrib/init.d/rc.asterisk.tmp "$(DESTDIR)/etc/rc.d/asterisk" ; \
822                         rm -f contrib/init.d/rc.asterisk.tmp ; \
823                 elif [ -d "$(DESTDIR)/Library/LaunchDaemons" ]; then \
824                         if [ ! -f "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist" ]; then \
825                                 sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;' < contrib/init.d/org.asterisk.asterisk.plist > asterisk.plist ; \
826                                 $(INSTALL) -m 644 asterisk.plist "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist"; \
827                                 rm -f asterisk.plist; \
828                         fi; \
829                         if [ ! -f "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.muted.plist" ]; then \
830                                 sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;' < contrib/init.d/org.asterisk.muted.plist > muted.plist ; \
831                                 $(INSTALL) -m 644 muted.plist "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.muted.plist"; \
832                                 rm -f muted.plist; \
833                         fi; \
834                 elif [ -f /etc/slackware-version ]; then \
835                         echo "Slackware is not currently supported, although an init script does exist for it."; \
836                 else \
837                         echo "We could not install init scripts for your distribution." ; \
838                 fi \
839         else \
840                 echo "We could not install init scripts for your operating system." ; \
841         fi
842
843 sounds:
844         $(MAKE) -C sounds all
845
846 # If the cleancount has been changed, force a make clean.
847 # .cleancount is the global clean count, and .lastclean is the
848 # last clean count we had
849
850 .lastclean: .cleancount
851         @$(MAKE) clean
852         @[ -f "$(DESTDIR)$(ASTDBDIR)/astdb.sqlite3" ] || [ ! -f "$(DESTDIR)$(ASTDBDIR)/astdb" ] || [ ! -f menuselect.makeopts ] || grep -q MENUSELECT_UTILS=.*astdb2sqlite3 menuselect.makeopts || (sed -i.orig -e's/MENUSELECT_UTILS=\(.*\)/MENUSELECT_UTILS=\1 astdb2sqlite3/' menuselect.makeopts && echo "Updating menuselect.makeopts to include astdb2sqlite3" && echo "Original version backed up to menuselect.makeopts.orig")
853
854 $(SUBDIRS_UNINSTALL):
855         +@$(SUBMAKE) -C $(@:-uninstall=) uninstall
856
857 main-binuninstall:
858         +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTLIBDIR="$(ASTLIBDIR)" $(SUBMAKE) -C main binuninstall
859
860 _uninstall: $(SUBDIRS_UNINSTALL) main-binuninstall
861         rm -f "$(DESTDIR)$(ASTMODDIR)/"*
862         rm -f "$(DESTDIR)$(ASTSBINDIR)/astgenkey"
863         rm -f "$(DESTDIR)$(ASTSBINDIR)/autosupport"
864         rm -rf "$(DESTDIR)$(ASTHEADERDIR)"
865         rm -rf "$(DESTDIR)$(ASTDATADIR)/firmware"
866         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/asterisk.8"
867         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/astgenkey.8"
868         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/autosupport.8"
869         rm -f "$(DESTDIR)$(ASTMANDIR)/man8/safe_asterisk.8"
870         $(MAKE) -C sounds uninstall
871
872 uninstall: _uninstall
873         @echo " +--------- Asterisk Uninstall Complete -----+"
874         @echo " + Asterisk binaries, sounds, man pages,     +"
875         @echo " + headers, modules, and firmware builds,    +"
876         @echo " + have all been uninstalled.                +"
877         @echo " +                                           +"
878         @echo " + To remove ALL traces of Asterisk,         +"
879         @echo " + including configuration, spool            +"
880         @echo " + directories, and logs, run the following  +"
881         @echo " + command:                                  +"
882         @echo " +                                           +"
883         @echo " +            $(mK) uninstall-all            +"
884         @echo " +-------------------------------------------+"
885
886 uninstall-all: _uninstall
887         rm -rf "$(DESTDIR)$(ASTMODDIR)"
888         rm -rf "$(DESTDIR)$(ASTVARLIBDIR)"
889         rm -rf "$(DESTDIR)$(ASTDATADIR)"
890         rm -rf "$(DESTDIR)$(ASTSPOOLDIR)"
891         rm -rf "$(DESTDIR)$(ASTETCDIR)"
892         rm -rf "$(DESTDIR)$(ASTLOGDIR)"
893
894 menuconfig: menuselect
895
896 cmenuconfig: cmenuselect
897
898 gmenuconfig: gmenuselect
899
900 nmenuconfig: nmenuselect
901
902 menuselect: menuselect/cmenuselect menuselect/nmenuselect menuselect/gmenuselect
903         @if [ -x menuselect/nmenuselect ]; then \
904                 $(MAKE) nmenuselect; \
905         elif [ -x menuselect/cmenuselect ]; then \
906                 $(MAKE) cmenuselect; \
907         elif [ -x menuselect/gmenuselect ]; then \
908                 $(MAKE) gmenuselect; \
909         else \
910                 echo "No menuselect user interface found. Install ncurses,"; \
911                 echo "newt or GTK libraries to build one and re-rerun"; \
912                 echo "'./configure' and 'make menuselect'."; \
913         fi
914
915 cmenuselect: menuselect/cmenuselect menuselect-tree menuselect.makeopts
916         -@menuselect/cmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
917
918 gmenuselect: menuselect/gmenuselect menuselect-tree menuselect.makeopts
919         -@menuselect/gmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
920
921 nmenuselect: menuselect/nmenuselect menuselect-tree menuselect.makeopts
922         -@menuselect/nmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
923
924 # options for make in menuselect/
925 MAKE_MENUSELECT=CC="$(BUILD_CC)" CXX="" LD="" AR="" RANLIB="" \
926                 CFLAGS="$(BUILD_CFLAGS)" LDFLAGS="$(BUILD_LDFLAGS)" \
927                 $(MAKE) -C menuselect CONFIGURE_SILENT="--silent"
928
929 menuselect/menuselect: menuselect/makeopts .lastclean
930         +$(MAKE_MENUSELECT) menuselect
931
932 menuselect/cmenuselect: menuselect/makeopts .lastclean
933         +$(MAKE_MENUSELECT) cmenuselect
934
935 menuselect/gmenuselect: menuselect/makeopts .lastclean
936         +$(MAKE_MENUSELECT) gmenuselect
937
938 menuselect/nmenuselect: menuselect/makeopts .lastclean
939         +$(MAKE_MENUSELECT) nmenuselect
940
941 menuselect/makeopts: makeopts .lastclean
942         +$(MAKE_MENUSELECT) makeopts
943
944 menuselect-tree: $(foreach dir,$(filter-out main,$(MOD_SUBDIRS)),$(wildcard $(dir)/*.c) $(wildcard $(dir)/*.cc)) build_tools/cflags.xml build_tools/cflags-devmode.xml sounds/sounds.xml build_tools/embed_modules.xml utils/utils.xml agi/agi.xml configure makeopts
945         @echo "Generating input for menuselect ..."
946         @echo "<?xml version=\"1.0\"?>" > $@
947         @echo >> $@
948         @echo "<menu name=\"Asterisk Module and Build Option Selection\">" >> $@
949         +@for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SILENTMAKE) -C $${dir} SUBDIR=$${dir} moduleinfo >> $@; done
950         @cat build_tools/cflags.xml >> $@
951         +@for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SILENTMAKE) -C $${dir} SUBDIR=$${dir} makeopts >> $@; done
952         @if [ "${AST_DEVMODE}" = "yes" ]; then \
953                 cat build_tools/cflags-devmode.xml >> $@; \
954         fi
955         @cat utils/utils.xml >> $@
956         @cat agi/agi.xml >> $@
957         @cat build_tools/embed_modules.xml >> $@
958         @cat sounds/sounds.xml >> $@
959         @echo "</menu>" >> $@
960
961 .PHONY: menuselect
962 .PHONY: main
963 .PHONY: sounds
964 .PHONY: clean
965 .PHONY: dist-clean
966 .PHONY: distclean
967 .PHONY: all
968 .PHONY: _all
969 .PHONY: full
970 .PHONY: _full
971 .PHONY: prereqs
972 .PHONY: uninstall
973 .PHONY: _uninstall
974 .PHONY: uninstall-all
975 .PHONY: dont-optimize
976 .PHONY: badshell
977 .PHONY: installdirs
978 .PHONY: validate-docs
979 .PHONY: _clean
980 .PHONY: $(SUBDIRS_INSTALL)
981 .PHONY: $(SUBDIRS_DIST_CLEAN)
982 .PHONY: $(SUBDIRS_CLEAN)
983 .PHONY: $(SUBDIRS_UNINSTALL)
984 .PHONY: $(SUBDIRS)
985 .PHONY: $(MOD_SUBDIRS_EMBED_LDSCRIPT)
986 .PHONY: $(MOD_SUBDIRS_EMBED_LDFLAGS)
987 .PHONY: $(MOD_SUBDIRS_EMBED_LIBS)
988
989 FORCE:
990