Version 0.1.9 from FTP

[asterisk/asterisk.git] / configs / tormenta.conf.sample

diff --git a/configs/tormenta.conf.sample b/configs/tormenta.conf.sample
index 6b7fdc0..284ffb6 100755 (executable)
--- a/configs/tormenta.conf.sample
+++ b/configs/tormenta.conf.sample
@@ -1,5 +1,5 @@
 ;
 ;

-; Voice over Frame Relay (Adtran style)
+; Tormenta T1/PRI

 ;
 ; Configuration file
 
 ;
 ; Configuration file
 

@@ -13,6 +13,15 @@
 ;
 context=default
 ;
 ;
 context=default
 ;

+; Switchtype:  Only used for PRI.
+;
+; national:      National ISDN
+; dms100:        Nortel DMS100
+; 4ess:           AT&T 4ESS
+; 5ess:                  Lucent 5ESS
+;
+switchtype=national
+;

 ; Signalling method (default is fxs).  Valid values:
 ; em:     E & M
 ; em_w:   E & M Wink
 ; Signalling method (default is fxs).  Valid values:
 ; em:     E & M
 ; em_w:   E & M Wink

@@ -23,6 +32,8 @@ context=default
 ; fxo_ls: FXO (Loop Start)
 ; fxo_gs: FXO (Ground Start)
 ; fxo_ks: FXO (Kewl Start)
 ; fxo_ls: FXO (Loop Start)
 ; fxo_gs: FXO (Ground Start)
 ; fxo_ks: FXO (Kewl Start)

+; pri_cpe: PRI signalling, CPE side
+; pri_net: PRI signalling, Network side

 ;
 signalling=fxo_ls
 ;
 ;
 signalling=fxo_ls
 ;

@@ -39,6 +50,39 @@ signalling=fxo_ls
 ;
 rxwink=300             ; Atlas seems to use long (250ms) winks
 ;
 ;
 rxwink=300             ; Atlas seems to use long (250ms) winks
 ;

+; Whether or not to use caller ID
+;
+usecallerid=yes
+;
+; Whether or not to hide outgoing caller ID (Override with *67 or *82)
+;
+hidecallerid=no
+;
+; Whether or not to enable call waiting on FXO lines
+;
+callwaiting=yes
+;
+; Support Caller*ID on Call Waiting
+;
+callwaitingcallerid=yes
+;
+; Support three-way calling
+;
+threewaycalling=yes
+;
+; Support flash-hook call transfer (requires three way calling)
+;
+transfer=yes
+;
+; Enable echo cancellation 
+;
+echocancel=yes
+;
+; You may also set the default receive and transmit gains (in dB)
+;
+rxgain=0.0
+txgain=0.0
+;

 ; Logical groups can be assigned to allow outgoing rollover.  Groups
 ; range from 0 to 31, and multiple groups can be specified.
 ;
 ; Logical groups can be assigned to allow outgoing rollover.  Groups
 ; range from 0 to 31, and multiple groups can be specified.
 ;

@@ -59,21 +103,21 @@ immediate=no
 ; inherits the parameters that were specified above its declaration
 ;
 ;callerid="Green Phone"<(256) 428-6121>
 ; inherits the parameters that were specified above its declaration
 ;
 ;callerid="Green Phone"<(256) 428-6121>

-;channel=1
+;channel => 1

 ;callerid="Black Phone"<(256) 428-6122>
 ;callerid="Black Phone"<(256) 428-6122>

-;channel=2
+;channel => 2

 ;callerid="CallerID Phone" <(256) 428-6123>
 ;callerid="CallerID Phone" <(630) 372-1564>
 ;callerid="CallerID Phone" <(256) 704-4666>
 ;callerid="CallerID Phone" <(256) 428-6123>
 ;callerid="CallerID Phone" <(630) 372-1564>
 ;callerid="CallerID Phone" <(256) 704-4666>

-;channel=3
+;channel => 3

 ;callerid="Pac Tel Phone" <(256) 428-6124>
 ;callerid="Pac Tel Phone" <(256) 428-6124>

-;channel=4
+;channel => 4

 ;callerid="Uniden Dead" <(256) 428-6125>
 ;callerid="Uniden Dead" <(256) 428-6125>

-;channel=5
+;channel => 5

 ;callerid="Cortelco 2500" <(256) 428-6126>
 ;callerid="Cortelco 2500" <(256) 428-6126>

-;channel=6
+;channel => 6

 ;callerid="Main TA 750" <(256) 428-6127>
 ;callerid="Main TA 750" <(256) 428-6127>

-;channel=44
+;channel => 44

 ;
 ; For example, maybe we have some other channels
 ; which start out in a different context and use
 ;
 ; For example, maybe we have some other channels
 ; which start out in a different context and use

@@ -81,15 +125,8 @@ immediate=no
 ;
 ;context=remote
 ;sigalling=em
 ;
 ;context=remote
 ;sigalling=em

-;channel=15
-;channel=16
-
-;
-; Also, you can setup patterns to ignore by the "small switch" with
-; respect to turning off the dialtone. (like to keep the dialtone
-; going after a 9 is received
-;
-ignorepat=9
+;channel => 15
+;channel => 16

 
 ;signalling=em_w
 ;
 
 ;signalling=em_w
 ;

@@ -101,15 +138,24 @@ stripmsd=1
 ;callerid=asreceived
 ;group=0
 ;signalling=fxs_ls
 ;callerid=asreceived
 ;group=0
 ;signalling=fxs_ls

-;channel=45
+;channel => 45

 
 ;signalling=fxo_ls
 ;group=1
 ;callerid="Joe Schmoe" <(256) 428-6131>
 
 ;signalling=fxo_ls
 ;group=1
 ;callerid="Joe Schmoe" <(256) 428-6131>

-;channel=25
+;channel => 25

 ;callerid="Megan May" <(256) 428-6132>
 ;callerid="Megan May" <(256) 428-6132>

-;channel=26
+;channel => 26

 ;callerid="Suzy Queue" <(256) 428-6233>
 ;callerid="Suzy Queue" <(256) 428-6233>

-;channel=27
+;channel => 27

 ;callerid="Larry Moe" <(256) 428-6234>
 ;callerid="Larry Moe" <(256) 428-6234>

-;channel=28
+;channel => 28
+;
+; Sample PRI (CPE) config:  Specify the switchtype, the signalling as
+; either pri_cpe or pri_net for CPE or Network termination, and generally
+; you will want to create a single "group" for all channels of the PRI.
+;
+; switchtype = national
+; sig = pri_cpe
+; group = 2
+; channel => 1-23