Removing chan_vpb from the tree

[asterisk/asterisk.git] / configs / vpb.conf.sample

diff --git a/configs/vpb.conf.sample b/configs/vpb.conf.sample
old mode 100755 (executable)
new mode 100644 (file)
index 0ae629c..4a9b0b3
--- a/configs/vpb.conf.sample
+++ b/configs/vpb.conf.sample
@@ -1,10 +1,58 @@
+;
 ; V6PCI/V12PCI config file for VoiceTronix Hardware
-; Options
+;
+; Options for [general] section
+;
+; type = v12pci|v6pci|v4pci
+; cards = number of cards
+;    To use Asterisk indication tones
+; indication = 1
+;    none,-24db,-18db only for use with OpenLine4
+; ecsuppthres = 0|2048|4096
+;    Inter Digit Delay timeout for when collecting DTMF tones for dialling
+;    from a Station port, in ms
+; dtmfidd = 3000
+;    To use Asterisk DTMF detection
+; ast-dtmf-det=1
+;    Used with ast-dtmf-det
+; relaxdtmf=1
+;    When a native bridge occurs between 2 vpb channels, it will only break
+;    the connection for '#' and '*'
+; break-for-dtmf=no
+;    Set the maximum period between received rings, default 4000ms
+; timer_period_ring=4000
+;
+; Options for [interface] section
 ; board = board_number (1, 2, 3, ...)
 ; channel = channel_number (1,2,3...)
 ; mode = fxo|immediate|dialtone -- for type of line and line handling
 ; context = starting context
+; echocancel = on|off (on by default of v4pci, off by default for others)
+; callerid = on|off|v23|bell (on => to collect caller ID if available between 1st/2nd rings using vpb functions)
+;                            (v23|bell => collect caller ID using asterisk functions)
+;            Or for use with FXS channels a '"name" <location>' format can be used to set the channels CID
+;
+; UseLoopDrop = 0|1 (enables the use of Loop Drop detection, on by default in
+;                    some cases spurious loop-drops can cause unexpected 
+;                    hangup detection)
 ; 
+; Gain settings
+; txgain  => Transmit Software Gain (-12 => 12)
+; rxgain  => Receive Software Gain (-12 => 12)
+; txhwgain => Transmit hardware gain (-12 => 12)
+; rxhwgain => Receive Hardware gain (-12 => 12)
+;
+; These are advanced settings and only mentioned for completeness.
+; bal1  => Hybrid balance codec register 1
+; bal2  => Hybrid balance codec register 2
+; bal3  => Hybrid balance codec register 3
+;
+; Dial translations - if you want a pause or hook-flash in your dial string
+; you can use "w" for pause (wait) or "f" for "hook-flash", eg:
+; exten => _9XXX,1,Dial(vpb/g1/ww${EXTEN:${TRUNKMSD}})
+;
+;
+
 [general]
 type = v12pci
 ;type = v6pci
@@ -13,28 +61,29 @@ cards = 1
 
 [interfaces]
 
-board = 1
+board = 0
 echocancel = on
 
 
 ; For OpenLine4 cards
 ;context = demo
 ;mode = fxo
+;channel = 0
 ;channel = 1
 ;channel = 2
 ;channel = 3
-;channel = 4
 
 ; For OpenSwith12 with jumpers at factory default
 context = demo
 mode = fxo
+channel = 8
 channel = 9
 channel = 10
 channel = 11
-channel = 12
 
 context = local
 mode = dialtone
+channel = 0
 channel = 1
 channel = 2
 channel = 3
@@ -42,19 +91,18 @@ channel = 4
 channel = 5
 channel = 6
 channel = 7
-channel = 8
 ;
 ; For OpenSwitch6
 ; Note that V6PCI channel numbers start at 7!
 ;context = demo
 ;mode = fxo
+;channel = 6
 ;channel = 7
-;channel = 8
 
 ;mode = dialtone
+;channel = 8
 ;channel = 9
 ;channel = 10
 ;channel = 11
-;channel = 12