--- Functionality changes from Asterisk 13.10.0 to Asterisk 13.11.0 ----------
------------------------------------------------------------------------------
+chan_dahdi
+------------------
+ * Added "faxdetect_timeout" option.
+ The option determines how many seconds into a call before faxdetect
+ is disabled for the call. Setting the value to zero disables the timeout.
+
res_pjsip
------------------
* Added "fax_detect_timeout" to endpoint.
if (pvt->dsp_features && pvt->dsp) {
ast_dsp_set_features(pvt->dsp, pvt->dsp_features);
- pvt->dsp_features = 0;
}
}
#endif /* defined(HAVE_PRI) || defined(HAVE_SS7) */
/* Perform busy detection etc on the dahdi line */
int mute;
+ if ((p->dsp_features & DSP_FEATURE_FAX_DETECT)
+ && p->faxdetect_timeout
+ && p->faxdetect_timeout <= ast_channel_get_up_time(ast)) {
+ p->dsp_features &= ~DSP_FEATURE_FAX_DETECT;
+ ast_dsp_set_features(p->dsp, p->dsp_features);
+ ast_debug(1, "Channel driver fax CNG detection timeout on %s\n",
+ ast_channel_name(ast));
+ }
+
f = ast_dsp_process(ast, p->dsp, &p->subs[idx].f);
/* Check if DSP code thinks we should be muting this frame and mute the conference if so */
tmp->callprogress = conf->chan.callprogress;
tmp->waitfordialtone = conf->chan.waitfordialtone;
tmp->dialtone_detect = conf->chan.dialtone_detect;
+ tmp->faxdetect_timeout = conf->chan.faxdetect_timeout;
tmp->cancallforward = conf->chan.cancallforward;
tmp->dtmfrelax = conf->chan.dtmfrelax;
tmp->callwaiting = tmp->permcallwaiting;
confp->chan.callprogress |= CALLPROGRESS_FAX_OUTGOING;
} else if (!strcasecmp(v->value, "both") || ast_true(v->value))
confp->chan.callprogress |= CALLPROGRESS_FAX_INCOMING | CALLPROGRESS_FAX_OUTGOING;
+ } else if (!strcasecmp(v->name, "faxdetect_timeout")) {
+ if (sscanf(v->value, "%30u", &confp->chan.faxdetect_timeout) != 1) {
+ confp->chan.faxdetect_timeout = 0;
+ }
} else if (!strcasecmp(v->name, "echocancel")) {
process_echocancel(confp, v->value, v->lineno);
} else if (!strcasecmp(v->name, "echotraining")) {
*/
int dialtone_detect;
int dialtone_scanning_time_elapsed; /*!< Amount of audio scanned for dialtone, in frames */
+ /*!
+ * \brief The number of seconds into call to disable fax detection. (0 = disabled)
+ * \note Set from the "faxdetect_timeout" value read in from chan_dahdi.conf
+ */
+ unsigned int faxdetect_timeout;
struct timeval waitingfordt; /*!< Time we started waiting for dialtone */
struct timeval flashtime; /*!< Last flash-hook time */
/*! \brief Opaque DSP configuration structure. */
;faxdetect=outgoing
;faxdetect=no
;
+; When 'faxdetect' is enabled, one could use 'faxdetect_timeout' to disable fax
+; detection after the specified number of seconds into a call. Be aware that
+; outgoing analog channels may consider the channel is answered immediately
+; when dialing completes. Analog does not have a reliable method of detecting
+; when the far end answers. Zero disables the timeout.
+; Default is 0 to disable the timeout.
+;
+;faxdetect_timeout=30
+;
; When 'faxdetect' is used, one could use 'faxbuffers' to configure the DAHDI
; transmit buffer policy. The default is *OFF*. When this configuration
; option is used, the faxbuffer policy will be used for the life of the call