int inRinging; /*!< Number of calls ringing */
int onHold; /*!< Peer has someone on hold */
int call_limit; /*!< Limit of concurrent calls */
- int busy_limit; /*!< Limit where we signal busy */
+ int busy_level; /*!< Level of active channels where we signal busy */
enum transfermodes allowtransfer; /*! SIP Refer restriction scheme */
char vmexten[AST_MAX_EXTENSION]; /*!< Dialplan extension for MWI notify message*/
char mailbox[AST_MAX_EXTENSION]; /*!< Mailbox setting for MWI checks */
ast_cli(fd, " VM Extension : %s\n", peer->vmexten);
ast_cli(fd, " LastMsgsSent : %d/%d\n", (peer->lastmsgssent & 0x7fff0000) >> 16, peer->lastmsgssent & 0xffff);
ast_cli(fd, " Call limit : %d\n", peer->call_limit);
- if (peer->busy_limit)
- ast_cli(fd, " Busy limit : %d\n", peer->busy_limit);
+ if (peer->busy_level)
+ ast_cli(fd, " Busy limit : %d\n", peer->busy_level);
ast_cli(fd, " Dynamic : %s\n", (ast_test_flag(&peer->flags[1], SIP_PAGE2_DYNAMIC)?"Yes":"No"));
ast_cli(fd, " Callerid : %s\n", ast_callerid_merge(cbuf, sizeof(cbuf), peer->cid_name, peer->cid_num, "<unspecified>"));
ast_cli(fd, " MaxCallBR : %d kbps\n", peer->maxcallbitrate);
astman_append(s, "TransferMode: %s\r\n", transfermode2str(peer->allowtransfer));
astman_append(s, "LastMsgsSent: %d\r\n", peer->lastmsgssent);
astman_append(s, "Call-limit: %d\r\n", peer->call_limit);
- astman_append(s, "Busy-limit: %d\r\n", peer->busy_limit);
+ astman_append(s, "Busy-level: %d\r\n", peer->busy_level);
astman_append(s, "MaxCallBR: %d kbps\r\n", peer->maxcallbitrate);
astman_append(s, "Dynamic: %s\r\n", (ast_test_flag(&peer->flags[1], SIP_PAGE2_DYNAMIC)?"Y":"N"));
astman_append(s, "Callerid: %s\r\n", ast_callerid_merge(cbuf, sizeof(cbuf), peer->cid_name, peer->cid_num, ""));
} else if (p->call_limit && (p->inUse == p->call_limit))
/* check call limit */
res = AST_DEVICE_BUSY;
- else if (p->call_limit && p->busy_limit && p->inUse >= p->busy_limit)
+ else if (p->call_limit && p->busy_level && p->inUse >= p->busy_level)
/* We're forcing busy before we've reached the call limit */
res = AST_DEVICE_BUSY;
else if (p->call_limit && p->inUse)
peer->call_limit = atoi(v->value);
if (peer->call_limit < 0)
peer->call_limit = 0;
+ } else if (!strcasecmp(v->name, "busy-level")) {
+ peer->busy_level = atoi(v->value);
+ if (peer->busy_level < 0)
+ peer->busy_level = 0;
} else if (!strcasecmp(v->name, "amaflags")) {
format = ast_cdr_amaflags2int(v->value);
if (format < 0) {
; for a device. When the call limit is filled, we will indicate busy. Note that
; you need at least 2 in order to be able to do attended transfers.
;
-; If you set the busy-limit in addition to the call limit, we will indicate busy
-; when we have a number of calls that matches busy-limit, but still allow calls
+; If you set the busy-level in addition to the call limit, we will indicate busy
+; when we have a number of calls that matches busy-level, but still allow calls
; up to the call-limit. This allows for transfers while still having blinking
; lamps and queues understanding that a device is busy.
;
; videosupport videosupport
; maxcallbitrate maxcallbitrate
; rfc2833compensate mailbox
-; busy-limit
+; busy-level
; username
; template
; fromdomain
;host=box.provider.com
;usereqphone=yes ; This provider requires ";user=phone" on URI
;call-limit=5 ; permit only 5 simultaneous outgoing calls to this peer
-;busy-limit=2 ; Signal busy at 2 or more calls
+;busy-level=2 ; Signal busy at 2 or more calls
;outboundproxy=proxy.provider.domain ; send outbound signaling to this proxy, not directly to the peer
; Call-limits will not be enforced on real-time peers,
; since they are not stored in-memory