Version 0.1.7 from FTP
authorMark Spencer <markster@digium.com>
Mon, 26 Mar 2001 21:55:56 +0000 (21:55 +0000)
committerMark Spencer <markster@digium.com>
Mon, 26 Mar 2001 21:55:56 +0000 (21:55 +0000)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257 65c4cc65-6c06-0410-ace0-fbb531ad65f3

configs/tormenta.conf.sample [new file with mode: 0755]

diff --git a/configs/tormenta.conf.sample b/configs/tormenta.conf.sample
new file mode 100755 (executable)
index 0000000..6b7fdc0
--- /dev/null
@@ -0,0 +1,115 @@
+;
+; Voice over Frame Relay (Adtran style)
+;
+; Configuration file
+
+[channels]
+;
+; Default language
+;
+;language=en
+;
+; Default context
+;
+context=default
+;
+; Signalling method (default is fxs).  Valid values:
+; em:     E & M
+; em_w:   E & M Wink
+; featd:  Feature Group D (The fake, Adtran style)
+; fxs_ls: FXS (Loop Start)
+; fxs_gs: FXS (Ground Start)
+; fxs_ks: FXS (Kewl Start)
+; fxo_ls: FXO (Loop Start)
+; fxo_gs: FXO (Ground Start)
+; fxo_ks: FXO (Kewl Start)
+;
+signalling=fxo_ls
+;
+; A variety of timing parameters can be specified as well
+; Including:
+;    prewink:     Pre-wink time
+;    preflash:    Pre-flash time
+;    wink:        Wink time
+;    flash:       Flash time
+;    start:       Start time
+;    rxwink:      Receiver wink time
+;    rxflash:     Receiver flashtime
+;    debounce:    Debounce timing
+;
+rxwink=300             ; Atlas seems to use long (250ms) winks
+;
+; Logical groups can be assigned to allow outgoing rollover.  Groups
+; range from 0 to 31, and multiple groups can be specified.
+;
+group=1
+;
+; Specify whether the channel should be answered immediately or
+; if the simple switch should provide dialtone, read digits, etc.
+;
+immediate=no
+;
+; CallerID can be set to "asreceived" or a specific number
+; if you want to override it.  Note that "asreceived" only
+; applies to trunk interfaces.
+;
+;callerid=2564286000
+;
+; Each channel consists of the channel number or range.  It
+; inherits the parameters that were specified above its declaration
+;
+;callerid="Green Phone"<(256) 428-6121>
+;channel=1
+;callerid="Black Phone"<(256) 428-6122>
+;channel=2
+;callerid="CallerID Phone" <(256) 428-6123>
+;callerid="CallerID Phone" <(630) 372-1564>
+;callerid="CallerID Phone" <(256) 704-4666>
+;channel=3
+;callerid="Pac Tel Phone" <(256) 428-6124>
+;channel=4
+;callerid="Uniden Dead" <(256) 428-6125>
+;channel=5
+;callerid="Cortelco 2500" <(256) 428-6126>
+;channel=6
+;callerid="Main TA 750" <(256) 428-6127>
+;channel=44
+;
+; For example, maybe we have some other channels
+; which start out in a different context and use
+; E & M signalling instead.
+;
+;context=remote
+;sigalling=em
+;channel=15
+;channel=16
+
+;
+; Also, you can setup patterns to ignore by the "small switch" with
+; respect to turning off the dialtone. (like to keep the dialtone
+; going after a 9 is received
+;
+ignorepat=9
+
+;signalling=em_w
+;
+; All those in group 0 I'll use for outgoing calls
+;
+; Strip most significant digit (9) before sending
+;
+stripmsd=1
+;callerid=asreceived
+;group=0
+;signalling=fxs_ls
+;channel=45
+
+;signalling=fxo_ls
+;group=1
+;callerid="Joe Schmoe" <(256) 428-6131>
+;channel=25
+;callerid="Megan May" <(256) 428-6132>
+;channel=26
+;callerid="Suzy Queue" <(256) 428-6233>
+;channel=27
+;callerid="Larry Moe" <(256) 428-6234>
+;channel=28